Ritto 1841370 Entravox 3-Einheiten-Intercom-System – Benutzerhandbuch

1. Einführung und Systemübersichtview

This manual provides essential information for the installation, operation, and maintenance of your Ritto Entravox 3-Unit Intercom System, model 1841370. This system is designed to facilitate communication between an outdoor door station and three indoor residential units, enhancing security and convenience for multi-dwelling applications.

Das Komplettpaket beinhaltet:

• One compact Entravox door station, white lacquered, with three illuminated call buttons and nameplates.
• Three TwinBus residential telephones (model 17630..), white.
• One Entravox power supply unit.

Figure 1: Complete Ritto Entravox 3-Unit Intercom System showing the outdoor door station and three indoor handsets.

2. Einrichtung und Installation

Installation of the Ritto Entravox system requires electrical knowledge and should ideally be performed by a qualified technician. Ensure all power is disconnected before beginning any installation work.

2.1 Komponenten überview

• Türstation: The outdoor unit with microphone, speaker, and call buttons.
• Indoor Handsets: The units inside each residence for communication and door release.
• Stromversorgung: Provides power to the entire intercom system.

2.2 Installationsschritte (Allgemeine Richtlinien)

1. Mount the Door Station: Select a suitable outdoor location, typically near the entrance, at an accessible height. Ensure it is protected from direct weather exposure if possible.
   

   Abbildung 2: Nahaufnahme view of the Ritto Entravox outdoor door station with call buttons and nameplates.

2. Install Indoor Handsets: Mount each of the three indoor handsets in a convenient location within their respective residences. Ensure they are within reach and have clear access to wiring.
   

   Figure 3: Ritto TwinBus indoor handset, showing the speaker grille and function buttons.

3. Schließen Sie das Netzteil an: Install the Entravox power supply unit in a dry, secure location, typically indoors. Connect it to the main electrical supply according to local electrical codes.
   

   Figure 4: Ritto Entravox power supply unit, showing connection terminals and product label.
4. Verdrahtung: Connect the door station, indoor handsets, and power supply using the TwinBus wiring system. Follow the detailed wiring diagrams provided in the manufacturer's full installation guide (not included in this general user manual). Ensure all connections are secure and correctly polarized.
5. Testen: After all components are installed and wired, restore power and test the system. Verify that calling from the door station rings the correct indoor unit, and that two-way communication and door release (if connected) function correctly.

Note: This section provides general guidance. Always refer to the specific installation instructions provided with your product for detailed wiring diagrams and safety precautions.

3. Bedienungsanleitung

3.1 Making a Call from the Door Station

1. The visitor presses the illuminated call button corresponding to the desired residence on the door station.
2. The indoor handset in the selected residence will ring.

3.2 Answering a Call from an Indoor Handset

1. When the handset rings, lift the receiver.
2. Speak into the receiver to communicate with the visitor at the door station.
3. To end the conversation, replace the receiver.

3.3 Door Release Function (if connected)

If your system is connected to an electric door opener, you can release the door from the indoor handset:

1. During an active conversation with a visitor, press the door release button on the indoor handset. This button is typically marked with a key symbol.
2. The door will unlock for a short period, allowing the visitor to enter.

3.4 Muting the Ringtone (if available)

Some TwinBus handsets may feature a ringtone mute function. Consult your specific handset model's documentation for details on this feature.

4. Wartung

Regelmäßige Wartung gewährleistet die Langlebigkeit und optimale Leistung Ihrer Gegensprechanlage.

• Reinigung: Wipe the door station and indoor handsets with a soft, damp Mit einem Tuch abwischen. Verwenden Sie keine Scheuermittel, Lösungsmittel oder aggressive Chemikalien, da diese die Oberfläche und die elektronischen Bauteile beschädigen können.
• Typenschilder: Periodically check and update the nameplates on the door station as needed. Ensure they are clean and legible.
• Umweltschutz: While the door station is designed for outdoor use, ensure it is not exposed to extreme conditions beyond its operating specifications.
• Verkabelungsprüfung: Periodically inspect visible wiring for any signs of damage or wear. If any damage is found, contact a qualified technician for repair.

5. Fehlerbehebung

If you encounter issues with your Ritto Entravox intercom system, refer to the following common problems and solutions:

For complex issues or if troubleshooting steps do not resolve the problem, it is recommended to contact a qualified electrician or the product manufacturer's support.

6. Spezifikationen

7. Garantie und Support

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. Warranty terms and conditions may vary by region and seller.

For technical support or service inquiries, please contact Ritto customer service or an authorized service partner. Keep your product model number (1841370) and purchase details readily available when seeking support.