Einführung
Thank you for choosing the AMS 7207/1 Wall Clock Pendulum Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.

Figure 1: AMS 7207/1 Wall Clock Pendulum Clock
Sicherheitshinweise
- Ensure the clock is mounted securely to prevent falling and potential injury or damage.
- Bewahren Sie Batterien außerhalb der Reichweite von Kindern auf. Bei Verschlucken sofort einen Arzt aufsuchen.
- Mischen Sie keine alten und neuen Batterien oder verschiedene Batterietypen.
- Um ein Auslaufen zu verhindern, entfernen Sie die Batterien, wenn die Uhr längere Zeit nicht benutzt wird.
- Reinigen Sie die Uhr mit einem weichen, trockenen Tuch. Vermeiden Sie die Verwendung von Scheuermitteln oder Lösungsmitteln.
Packungsinhalt
Bitte überprüfen Sie, ob alle Artikel im Paket vorhanden sind:
- AMS 7207/1 Wall Clock Pendulum Clock
- Bedienungsanleitung (dieses Dokument)
- Mounting hardware (screws, wall plugs - may vary by region)
Aufstellen
1. Auspacken
Carefully remove the clock from its packaging. Inspect for any signs of damage. Retain packaging for future transport or returns.
2. Einlegen der Batterie
- Locate the battery compartment on the back of the clock movement.
- Legen Sie eine (1) AA-Batterie ein und achten Sie darauf, dass die Polarität (+/-) mit den Markierungen im Batteriefach übereinstimmt.
- Schließen Sie den Batteriefachdeckel.
3. Uhrzeit einstellen
Once the battery is installed, the clock will automatically search for the atomic time signal. This process may take several minutes. For manual setting:
- Use the small adjustment wheel or button on the back of the clock movement to manually set the time.
- Turn the wheel clockwise until the correct time is displayed.

Figure 2: Close-up of the clock dial
4. Pendelinstallation
Gently attach the pendulum to the hook or slot provided on the clock movement. Ensure it hangs freely and can swing without obstruction.
5. Montage der Uhr
- Wählen Sie einen geeigneten Platz an der Wand und stellen Sie sicher, dass dieser stabil genug ist, um das Gewicht der Uhr zu tragen.
- Mark the desired position for the mounting screw.
- Drill a pilot hole (if necessary) and insert a wall plug.
- Insert a screw, leaving a small portion protruding from the wall.
- Carefully hang the clock onto the screw, ensuring it is stable and level.
Bedienungsanleitung
Zeitmessung
The AMS 7207/1 features a quartz pendulum movement with atomic operation. Once set up, the clock will maintain accurate time. The pendulum is for aesthetic purposes and should swing gently.
Atomzeitsynchronisation
The clock automatically synchronizes with the atomic time signal, ensuring precise timekeeping. This feature also handles daylight saving time adjustments automatically. Ensure the clock is placed in an area where it can receive a clear signal, away from large metal objects or electronic interference.
Wartung
Reinigung
To clean the clock, gently wipe the surfaces with a soft, dry, lint-free cloth. For the glass, a slightly damp cloth followed by a dry one can be used. Avoid harsh chemicals or abrasive materials that could scratch the finish or glass.
Batteriewechsel
When the clock hands stop moving or the pendulum stops swinging, it is time to replace the battery. Follow the battery installation steps in the Setup section. Always use a fresh AA battery.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Uhr läuft nicht | Leere oder falsch eingesetzte Batterie | Ersetzen Sie die Batterie durch eine neue AA-Batterie und achten Sie dabei auf die richtige Polarität. |
| Falsche Uhrzeit angezeigt | Poor atomic signal reception or manual setting error | Move clock to a location with better signal. Allow time for synchronization. Manually set time if necessary. |
| Das Pendel schwingt nicht. | Not properly attached or obstructed | Ensure pendulum is correctly hooked and swings freely without touching the clock body. Check battery. |
Technische Daten
- Marke: AMS
- Modellnummer: W7207/1
- Abmessungen: 62 x 7 x 294 cm (approx. 24.41"W x 9.06"H - Note: provided dimensions seem inconsistent, using product title's cm values)
- Gewicht: 1.1 Kilogramm
- Material: Massive walnut wood, lacquered with polished aluminum, satinated mineral glass
- Bewegung: Quartz Pendulum Movement, Atomic Operation
- Anzeigetyp: Analog
- Energiequelle: 1 x AA-Batterie (nicht im Lieferumfang enthalten)
- Farbe: Silver (dial and hands), Brown (wood back)
- Verwendung im Innen- und Außenbereich: Innenbereich
Garantie und Support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official AMS webWebsite für weitere Unterstützung.
Hersteller: AMS
Herstellernummer: W7207/1