SAMSON RS15HD

Samson Resound RS15HD 15" 2-Way Passive PA Cabinet

Model: RS15HD (02-06-004)

Einführung

The Samson Resound RS15HD is a high-performance 15-inch 2-way passive PA cabinet designed for professional audio applications. This speaker cabinet delivers powerful, full-range sound suitable for various venues, from live performances to houses of worship. Its robust construction ensures durability and consistent performance.

Hauptmerkmale

  • Two-way passive PA speaker cabinet
  • 600 watt program power handling @ 8 ohms
  • Custom designed 15-inch low frequency driver
  • 1.5-inch titanium compression driver
  • Dual 1/4-inch and Speakon connections for versatile connectivity

Produkt überview

Front view of the Samson Resound RS15HD 15-inch 2-Way Passive PA Cabinet, showing the large woofer and smaller horn driver behind a protective metal grille, with the Samson logo at the bottom.

Abbildung 1: Vorderseite view of the Samson Resound RS15HD PA Cabinet. This image displays the robust black cabinet with a full metal grille protecting the 15-inch low-frequency driver and the high-frequency compression driver. The Samson logo is prominently displayed at the bottom center of the grille.

Installationshandbuch

Follow these steps to properly set up your Samson Resound RS15HD PA Cabinet:

  1. Platzierung: Position the speaker on a stable, flat surface or a compatible speaker stand. Ensure the speaker is placed in a location that allows for optimal sound dispersion and avoids obstructions.
  2. Konnektivität: Schließen Sie Ihre Audioquelle an (z. B. amplifier, mixer) to the RS15HD using high-quality speaker cables. Utilize either the 1/4-inch or Speakon connections on the rear panel. Ensure secure connections to prevent signal loss or damage.
  3. Impedanzanpassung: Verify that the impedance of your amplifier matches the 8-ohm impedance of the RS15HD cabinet. Mismatched impedance can lead to poor performance or damage to your equipment.
  4. Erstes Einschalten: Bevor Sie Ihr Gerät einschalten amplifier, ensure all volume controls are set to their minimum. Power on the amplifier, then slowly increase the volume to a desired listening level.

Important: Always ensure your amplifier is turned off before making any connections to the speaker cabinet.

Bedienungsanleitung

The Samson Resound RS15HD is a passive speaker, meaning it requires an external amplifier to operate. Proper operation involves managing the amplifier's output and monitoring sound levels.

  • Lautstärkeregelung: Adjust the volume primarily from your amplifier or mixer. Avoid pushing the amplifier into clipping (distortion), as this can damage the speaker.
  • Ausgleich: Use the equalizer on your mixer or amplifier to fine-tune the sound. The RS15HD is designed for a balanced frequency response, but minor adjustments may be needed for different acoustic environments.
  • Überwachung: Listen for any signs of distortion or stress from the speaker. If distortion occurs, reduce the input level or amplifier volume immediately.
  • Daisy-Chaining: If connecting multiple passive speakers, ensure the total impedance presented to the amplifier is within its safe operating range. Consult your amplifier's manual for specific guidelines.

Wartung und Pflege

To ensure the longevity and optimal performance of your RS15HD PA Cabinet, follow these maintenance guidelines:

  • Reinigung: Use a soft, dry cloth to clean the exterior of the cabinet. Do not use abrasive cleaners or solvents, as they may damage the finish.
  • Lagerung: When not in use, store the speaker in a dry, cool environment, away from direct sunlight and extreme temperatures.
  • Schutz: Protect the speaker from physical impact and moisture. Consider using a protective cover during transport or storage.
  • Inspektion: Periodically inspect the speaker grille, connections, and cabinet for any signs of wear or damage. Address any issues promptly.

Fehlerbehebung

ProblemMögliche UrsacheLösung
Keine Tonausgabe
  • Lose oder fehlerhafte Kabelverbindungen.
  • Amplifier not powered on or volume too low.
  • Input source issue.
  • Check all speaker and input cables; ensure they are securely connected.
  • Verifizieren amplifier power and increase volume gradually.
  • Testen Sie es mit einer anderen Audioquelle.
Verzerrter Klang
  • AmpVerstärkerübersteuerung (Overdrive).
  • Falsche Impedanzanpassung.
  • Beschädigtes Lautsprecherbauteil.
  • Reduzieren amplifier volume or input gain.
  • Sicherstellen ampDie Impedanz des Verstärkers ist auf die Impedanz des Lautsprechers (8 Ohm) abgestimmt.
  • Contact Samson support for service if distortion persists at normal levels.
Intermittierender Ton
  • Fehlerhaftes Kabel.
  • Wackelkontakt.
  • Replace speaker cables.
  • Überprüfen und sichern Sie alle Verbindungen.

Technische Spezifikationen

ModellnameRS15HD
Artikelmodellnummer02-06-004
LautsprechertypPassive PA Speaker Cabinet
Lautsprechergröße15 Inches (Low Frequency Driver)
Hochfrequenztreiber1.5-inch Titanium Compression Driver
Power-Handling programmieren600 Watt
Impedanz8 Ohm
AnschlüsseDual 1/4-inch and Speakon
SchrankkonstruktionAll-plywood
Artikelgewicht44.5 Pfund
MarkeSAMSON
UPC809164008637

Garantie und Support

For detailed warranty information and technical support, please refer to the official Samson website or contact Samson customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Samson Technologies Contact Information:

  • WebWebsite: www.samsontech.com
  • Unterstützung: Siehe den Supportbereich auf der offiziellen Website. webWebseite mit häufig gestellten Fragen, Downloads und Kontaktmöglichkeiten.

Samson Resound RS15HD User Manual

© 2024 Samson Technologies. Alle Rechte vorbehalten.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.