Geberit PushControl Bathtub Drain and Overflow Unit Model 151.603 Instruction Manual

1. Einleitung

This manual provides detailed instructions for the installation, operation, and maintenance of your Geberit PushControl Bathtub Drain and Overflow Unit, Model 151.603. This unit is designed for bathtubs with depths ranging from 17 to 24 inches and features a 27-inch stainless steel cable for reliable operation. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The Geberit PushControl system offers a convenient push-button mechanism for opening and closing the bathtub drain, providing a clean and modern aesthetic for your bathroom.

2. Sicherheitshinweise

WARNUNG: Die Nichtbeachtung dieser Sicherheitsanweisungen kann zu Sachschäden, Personenschäden oder zum Tod führen.

• Vor Beginn jeglicher Sanitärarbeiten muss die Wasserzufuhr immer abgestellt werden.
• Tragen Sie während der Installation geeignete persönliche Schutzausrüstung, wie z. B. Schutzbrille und Handschuhe.
• Stellen Sie sicher, dass alle Verbindungen sicher und wasserdicht sind, um Leckagen zu vermeiden.
• Wenn Sie sich bei irgendeinem Teil des Installationsprozesses unsicher sind, konsultieren Sie einen qualifizierten Installateur.
• Bewahren Sie Kleinteile außerhalb der Reichweite von Kindern auf, um Erstickungsgefahr vorzubeugen.

3. Packungsinhalt

Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:

• Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603)
• Brass trim (Polished Chrome)
• Sieb aus Edelstahl
• 27" stainless steel cable (Teflon coated)
• Installationswerkzeug
• Gaskets and fasteners

4. Spezifikationen

5. Installation

Before you begin, ensure you have all necessary tools and that the water supply to the bathtub is turned off. Refer to local plumbing codes for specific requirements.

5.1 Erforderliches Werkzeug

• Klempnerkitt oder Silikondichtstoff
• Verstellbarer Schraubenschlüssel oder Rohrzange
• Schraubendreher (Kreuzschlitz und Schlitz)
• Maßband
• Schutzbrille und Handschuhe

5.2 Schrittweise Installation

1. Bereiten Sie die Badewanne vor: Ensure the bathtub drain and overflow holes are clean and free of debris. The overflow hole should be between 2" and 2-1/2" in diameter.
2. Install the Drain Shoe: Apply plumber's putty or silicone sealant around the underside of the drain flange. Insert the drain flange into the bathtub drain hole from the inside of the tub. From underneath the tub, attach the drain shoe assembly, ensuring the gasket is properly seated. Tighten securely with an adjustable wrench.
3. Installieren Sie die Overflow-Assembly: Position the overflow gasket on the back of the overflow plate. Insert the overflow pipe assembly into the overflow hole from the outside of the tub. Align the overflow plate with the overflow hole from the inside of the tub and secure it with the provided screw. Ensure the cable is routed correctly and not kinked.
4. Schließen Sie das Kabel an: Connect the 27" stainless steel cable to both the drain stopper mechanism and the PushControl overflow trim. Follow the specific instructions provided with the unit for proper cable attachment and adjustment. The installation tool included will assist with this step.
5. Anschluss an das Abwasserrohr: Connect the 1-1/2" tubular piping of the drain and overflow unit to your existing waste pipe system. Ensure all connections are tight and sealed to prevent leaks.
6. Auf Dichtheit prüfen: Fill the bathtub with water and check all connections for any signs of leakage. Operate the PushControl mechanism several times to ensure the drain stopper opens and closes smoothly.

Image 1: Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603) showing the polished chrome trim and cable assembly. This image illustrates the main components of the unit.

6. Bedienung

The Geberit PushControl system is designed for simple and intuitive operation.

• Zum Verschließen des Abflusses: Firmly press the center of the overflow trim plate. The drain stopper will move into the closed position, allowing the tub to fill with water.
• Zum Öffnen des Abflusses: Firmly press the center of the overflow trim plate again. The drain stopper will release, allowing water to drain from the tub.

Ensure the mechanism operates smoothly. If you experience resistance, refer to the Troubleshooting section.

7. Wartung

Regular cleaning and maintenance will ensure the longevity and proper function of your Geberit PushControl unit.

• Reinigung der Zierleisten: Clean the polished chrome trim with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the finish.
• Reinigen des Abflusses: Periodically remove the drain stopper and clean any hair or debris that may have accumulated in the drain opening.
• Kabelinspektion: Annually inspect the stainless steel cable for any signs of wear or damage. While the cable is Teflon coated for durability, extreme conditions or improper use can cause wear.

8. Fehlerbehebung

If problems persist after attempting these solutions, please contact Geberit customer support or a qualified plumber.

9. Garantie und Support

Geberit products are manufactured to the highest quality standards and come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Geberit webWebsite.

For technical assistance, replacement parts, or further support, please contact Geberit customer service:

• WebWebsite: www.geberit.com
• Kundendienst: Siehe Geberit webWebsite für regionale Kontaktinformationen.

Bitte halten Sie bei Kontaktaufnahme mit dem Support Ihre Produktmodellnummer (151.603) und das Kaufdatum bereit.