360 Elektrisch 36070
360 Electrical GreenSurge Protector User Manual
Model: 36070 | Brand: 360 Electrical
Produkt überview
The 360 Electrical 36070 4-Outlet GreenSurge Protector is designed to protect your electronic equipment from power surges while also helping to reduce standby power loss. It features a unique outlet configuration with smart energy-saving capabilities.
- Save energy and money by reducing standby power loss.
- Smart outlets with one master outlet controlling two power save outlets.
- Includes one always-on outlet for continuous power.
- Features patented new X3 MOV surge protection with 1080 joules.
- Safety shutdown technology protects connected equipment during extreme surges.
Setup und Installation
Follow these steps to properly set up your GreenSurge Protector:
- Auspacken: Nehmen Sie den Überspannungsschutz vorsichtig aus der Verpackung.
- Platzierung: Choose a dry indoor location near the electronic devices you wish to protect. Ensure the location allows for proper ventilation and avoids obstruction of the outlets.
- Einstecken: Insert the surge protector's plug firmly into a standard 240V wall outlet.
- Kontrollleuchten: Observe the indicator lights on the top of the unit.
- Protected (Green): Illuminates when the surge protection is active and functioning correctly.
- Grounded (Green): Illuminates when the surge protector is properly grounded.
- Power Save On (Blue): Illuminates when the power save feature is active.
- Geräte verbinden: Plug your electronic devices into the appropriate outlets. Refer to the diagram below for outlet types.
Figure 1: GreenSurge Protector Layout. This image illustrates the indicator lights (Protected, Grounded, Power Save On) and the different types of outlets (Master, Power Save, Always On) on the surge protector.
Bedienungsanleitung
The GreenSurge Protector is designed for ease of use and energy efficiency:
- Master Outlet: This outlet controls the power to the "Power Save" outlets. Plug your primary device (e.g., TV, computer) into the MASTER Steckdose.
- Power Save Outlets: These two outlets are controlled by the Master outlet. When the device plugged into the Master outlet is turned off or enters a low-power state, power to the "Power Save" outlets will be cut, reducing standby power consumption. Plug peripheral devices (e.g., speakers, printer, monitor) into the ENERGIESPAREN Steckdosen.
- Immer eingeschaltete Steckdose: This outlet provides continuous power, regardless of the state of the Master outlet. Use this for devices that require constant power, such as a cable box, router, or phone charger.
- Energieeinsparung: The smart outlet feature can help save up to an average of $23 per year on your electric bill by eliminating phantom load from connected devices.
Wartung
To ensure the longevity and optimal performance of your surge protector:
- Reinigung: Trennen Sie den Überspannungsschutz vor der Reinigung von der Steckdose. Wischen Sie die Außenseite mit einem weichen, trockenen Tuch ab. Verwenden Sie keine flüssigen Reiniger oder Sprays.
- Inspektion: Periodically inspect the surge protector and its cord for any signs of damage, such as frayed wires or cracked casing. Bei Feststellung einer Beschädigung ist die Verwendung sofort einzustellen.
- Überspannungsschutzstatus: Der Geschützt indicator light should always be illuminated when the unit is plugged in and functioning correctly. If this light goes out, it indicates that the surge protection has been compromised (e.g., due to a significant power surge) and the unit may no longer provide surge protection. In such a case, the safety shutdown technology will turn off power to connected equipment. The unit should be replaced.
Fehlerbehebung
If you encounter issues with your GreenSurge Protector, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| No indicator lights are on. | The surge protector is not receiving power. | Ensure the surge protector is firmly plugged into a working wall outlet. Check the wall outlet with another device. |
| Die Kontrollleuchte „Geschützt“ ist aus. | Surge protection has been compromised. | The unit has absorbed a significant surge and can no longer provide protection. Replace the surge protector. |
| Devices plugged into "Power Save" outlets do not turn on/off with the Master device. | Master device is not drawing enough power or is not properly configured. | Ensure the Master device is fully powered off (not just in standby) to trigger the power-saving feature. Verify the Master device is plugged into the correct Master outlet. |
| Die Kontrollleuchte „Erdung“ ist aus. | Fehlerhafte Erdung der Wandsteckdose. | Consult a qualified electrician to inspect your wall outlet's grounding. Do not use the surge protector if the "Grounded" light is off. |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Hersteller | 360 Elektrisch |
| Teilenummer | 36070 |
| Artikelmodellnummer | 36070 |
| Artikelgewicht | 7.2 Unzen |
| Verpackungsabmessungen | 9 x 6.2 x 2.3 Zoll |
| Größe | 4 Steckdose |
| Farbe | Weiß |
| Form | Wohnung |
| Bandtage | 240 Volt |
| Artikelpaket Menge | 1 |
| Plug-Format | Typ B |
| Besondere Merkmale | Surge Protection, Energy Saving Smart Outlets |
| Insgesamt Steckdosen | 4 |
| Überspannungsschutz | 1080 Joules (X3 MOV) |
Garantieinformationen
This 360 Electrical GreenSurge Protector comes with a Lebenslange Produktgarantie. For details regarding warranty claims or coverage, please refer to the official warranty documentation provided with your product or contact 360 Electrical customer support.
Kundenservice
For further assistance, technical support, or inquiries regarding your 360 Electrical GreenSurge Protector, please contact the manufacturer's customer support. Refer to the product packaging or the official 360 Electrical webWebsite für Kontaktdaten.