Beyerdynamic DT-108-200-400-BLACK

1. Einleitung

The Beyerdynamic DT 108 is a professional single-ear headset designed for demanding audio environments such as news gathering, film, TV production, and live events. Its robust construction ensures durability, while the comfortable design allows for extended wear. This manual provides essential information for the proper setup, operation, and maintenance of your DT 108 headset.

Image: The Beyerdynamic DT-108-200-400-BLACK single-ear headset, showing the headphone cup, headband, and hypercardioid microphone arm.

2. Hauptmerkmale

• Closed, Dynamic Single-Ear Headphone: Provides excellent sound isolation while allowing one ear to monitor ambient sound.
• 400 Ohm Impedanz: Optimized for professional audio equipment.
• Dynamic, Hypercardioid Microphone: Designed for clear voice transmission with excellent off-axis rejection, minimizing background noise.
• High SPL Capability: Microphone is capable of handling very high sound pressure levels without distortion.
• Außergewöhnlicher Komfort: Features a soft headband and ear pads for long-term wear comfort.
• Robuste und langlebige Konstruktion: Built to withstand the rigors of professional use.

3. Einrichtung

The DT 108 headset requires a connecting cable (sold separately) to operate. Ensure you have the correct cable for your specific application (e.g., XLR for microphone, 1/4-inch or 3.5mm for headphone).

1. Schließen Sie das Kabel an: Attach the appropriate connecting cable to the headset's connector. Ensure a secure connection.
2. Audioanschlüsse identifizieren: Locate the microphone input and headphone output ports on your audio mixer, intercom system, or recording device. Microphone inputs are typically XLR, and headphone outputs are usually 1/4-inch (6.35mm) or 3.5mm jacks.
3. Einstecken: Connect the microphone end of the cable to the microphone input and the headphone end to the headphone output.
4. Einschalten: Turn on your audio equipment.

4. Bedienungsanleitung

1. Tragen des Headsets: Place the single ear cup over one ear, ensuring a comfortable and secure fit. The headband should rest comfortably over your head. The open side allows for monitoring of ambient sound.
2. Einstellen des Mikrofons: Position the microphone arm so that the microphone is approximately 1-2 inches (2.5-5 cm) from the corner of your mouth. This optimal distance helps capture clear audio and minimizes breath noises.
3. Audioüberwachung: Adjust the headphone volume on your connected audio device to a comfortable listening level. The DT 108 is designed to provide clear audio monitoring.
4. Speaking into the Microphone: Speak clearly and directly into the microphone. The hypercardioid pattern is designed to pick up sound primarily from the front, reducing unwanted background noise.

5. Wartung und Pflege

• Reinigung: Use a soft, dry cloth to wipe down the headset. For ear pads, a slightly damp Ein Tuch mit milder Seife kann verwendet werden, muss aber vor Gebrauch vollständig trocken sein. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
• Lagerung: Bewahren Sie das Headset an einem sauberen, trockenen Ort fern von extremen Temperaturen und direkter Sonneneinstrahlung auf. Achten Sie darauf, dass sich das Kabel nicht verheddert.
• Kabelpflege: Handle the connecting cable with care. Avoid sharp bends or excessive pulling, which can damage the internal wiring.
• Austausch der Ohrpolster: Ear pads are replaceable. If they become worn or damaged, contact Beyerdynamic support or an authorized dealer for replacement parts.

6. Fehlerbehebung

• Kein Ton aus dem Kopfhörer:
  • Check if the headphone cable is securely connected to both the headset and the audio output.
  • Überprüfen Sie den Lautstärkepegel an Ihrem Audiogerät.
  • Stellen Sie sicher, dass die Audioquelle aktiv ist und ein Signal sendet.
  • Test with another audio source or device if possible.
• Mikrofon funktioniert nicht:
  • Check if the microphone cable is securely connected to both the headset and the microphone input.
  • Ensure the microphone input on your audio device is enabled and its gain/level is appropriately set.
  • Confirm that phantom power is not accidentally engaged if your device provides it, as this dynamic microphone does not require it and it could potentially cause issues.
  • Test with another microphone input or device if possible.
• Verzerrter Ton:
  • Reduce the input gain on your audio device if the sound is distorted from the microphone.
  • Lower the output volume if the headphone audio is distorted.
  • Überprüfen Sie, ob Kabel oder Anschlüsse beschädigt sind.

7. Spezifikationen

8. Garantie und Support

Beyerdynamic products are manufactured to high quality standards and come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Beyerdynamic webWebsite.

For technical support, spare parts, or service inquiries, please contact Beyerdynamic customer service or visit their official support page. You can find more information and contact details on the Beyerdynamic Store on Amazon oder deren globale webWebsite.