Williams AV EAR 008 Single Over-Ear Hook Headphone User Manual

Einführung

The Williams AV EAR 008 is a single over-ear hook headphone designed for clear audio reception. It is particularly suitable for individuals with mild to moderate hearing loss and is recommended for use with FM receivers and select IR receivers. This manual provides essential information for the proper setup, operation, and maintenance of your EAR 008 headphone.

Image of the Williams AV EAR 008 Single Over-Ear Hook Headphone, showing its over-ear design and 3.5mm mono plug.

Aufstellen

Unpack the Headphone: Carefully remove the EAR 008 headphone from its packaging.
Identifizieren Sie den Audiostecker: The headphone features a 3.5mm mono plug at the end of its 1-meter cord.
Mit Gerät verbinden: Insert the 3.5mm mono plug into the corresponding audio output jack of your compatible device, such as an FM receiver, IR receiver, or any device with a 3.5mm audio input jack. Ensure the plug is fully inserted for a secure connection.
Position am Ohr: Gently place the over-ear hook of the headphone over one ear. Adjust for comfort and optimal sound delivery. The headphone is designed to hang on the outside of the ear.

Bedienungsanleitung

Gerät einschalten: Ensure your audio source device (e.g., FM receiver) is powered on and transmitting audio.
Lautstärke anpassen: Use the volume controls on your connected audio source device to set the desired listening level. The EAR 008 headphone does not have integrated volume controls.
Hören: Once connected and volume is adjusted, audio will be delivered through the single earpiece.

Wartung

Reinigung: To clean the headphone, gently wipe the plastic and rubber surfaces with a soft, dry, or slightly damp Tuch. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
Wassereinwirkung: The EAR 008 headphone is nicht wasserbeständig. Avoid exposing it to water, moisture, or excessive humidity to prevent damage.
Lagerung: When not in use, store the headphone in a clean, dry place away from direct sunlight and extreme temperatures. Avoid tangling the cord.
Kabelpflege: Do not pull on the cord to disconnect the headphone. Always grasp the plug itself.

Fehlerbehebung

Problem	Mögliche Ursache	Lösung
Kein Ton	Headphone not properly connected. Audio source device is off or muted. Volume on audio source device is too low.	Stellen Sie sicher, dass der 3.5-mm-Stecker vollständig in die Audiobuchse eingesteckt ist. Check if the audio source device is powered on and not muted. Erhöhen Sie die Lautstärke an Ihrem Audiogerät.
Niedriger oder verzerrter Ton	Volume on audio source device is too low. Schlechte Verbindung. Audio source device issue.	Erhöhen Sie die Lautstärke an Ihrem Audiogerät. Stellen Sie sicher, dass der 3.5-mm-Stecker fest angeschlossen ist. Test the headphone with another compatible audio source device to rule out a device issue.

Technische Daten

Modell: OHR 008
Konnektivität: Verdrahtet
Steckertyp: 3.5 mm Mono
Kabellänge: 1 Meter
Impedanz: 32 Ohm
Frequenzbereich: 20 Hz - 20 kHz
Größe des Audiotreibers: 23 Millimeter
Hörerform: Ohrhaken
Material: Kunststoff, Gummi
Wasserbeständigkeit: Nicht wasserfest
Produktabmessungen: 4.2 x 2.3 x 0.2 Zoll
Artikelgewicht: 0.05 Pfund
Empfohlene Verwendung: FM receivers and select IR receivers

Garantie und Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Williams AV directly through their official webBewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

Hersteller: Williams Sound (Williams AV)