ORE International 6336F Floating Shade Floor Lamp Bedienungsanleitung

Einführung

This manual provides essential instructions for the safe assembly, operation, and maintenance of your ORE International 6336F Floating Shade Floor LampBitte lesen Sie diese Anleitung vor der Installation sorgfältig durch und bewahren Sie sie zum späteren Nachschlagen auf.

The ORE International 6336F is a modern floor lamp featuring a rectangular white linen shade, a brushed nickel body stand, and an espresso wooden base. It is designed for indoor use and includes an on/off step switch.

Wichtige Sicherheitshinweise

• Lies alle Anweisungen: Before assembling or using this lampLesen und verstehen Sie alle Anweisungen sorgfältig.
• Elektrische Sicherheit: Vor Montage, Installation oder Wartung unbedingt die Stromversorgung trennen. Nur die angegebene Glühbirnenart und Wattzahl verwenden.tage.
• Nur zur Verwendung im Innenbereich: Dieses lamp is designed for indoor use in dry locations. Do not expose to water or moisture.
• Stabile Platzierung: Platzieren Sie das lamp auf einer ebenen, stabilen Oberfläche, um ein Umkippen zu verhindern.
• Kabelsicherheit: Do not run the power cord under carpets or in areas where it can be tripped over or damaged. Keep the cord away from heat sources.
• Handhabung der Glühbirne: Allow bulbs to cool before touching or replacing. Do not exceed the maximum wattage ist auf der linken Seite angegebenamp.
• Reinigung: Clean with a soft, dry cloth. Do not use liquid or abrasive cleaners.
• UL-gelistet: Dieses Produkt ist UL-gelistet, was die Einhaltung der Sicherheitsstandards bestätigt.

Ersatzteilliste

Before beginning assembly, ensure all parts are present and undamaged. Refer to the diagram below for identification.

Abbildung 1: ORE International 6336F Floating Shade Floor Lamp. This image displays the fully assembled lamp, featuring a rectangular white linen shade positioned above a slender brushed nickel stand, which is anchored by a solid black wooden base.

1. Base (Wooden)
2. Lower Pole Section (Brushed Nickel)
3. Upper Pole Section (Brushed Nickel)
4. Lamp Head with Socket (Brushed Nickel)
5. Rectangular Linen Shade
6. Shade Support Frame (if separate)
7. Power Cord with Step Switch
8. Hardware (Screws, Washers, Allen Wrench - specific to model)

Montageanleitung

Befolgen Sie diese Schritte sorgfältig, um Ihren Boden zusammenzubauen.amp. It is recommended to assemble the lamp auf einer weichen, sauberen Oberfläche, um Kratzer zu vermeiden.

1. Komponenten auspacken: Carefully remove all parts from the packaging. Lay them out and verify against the Parts List.
2. Untere Stange an der Basis befestigen: Connect the lower pole section (2) to the wooden base (1). Secure it using the provided hardware (screws/washers) and the appropriate tool (e.g., Allen wrench). Ensure the pole is firmly seated and stable.
3. Connect Upper Pole: Screw the upper pole section (3) onto the lower pole section (2). Gently twist until securely tightened. Be careful not to cross-thread.
4. Installieren Sie L.amp Kopf: Befestigen Sie das lamp head with socket (4) to the top of the upper pole section (3). Ensure the electrical wire passes freely through the pole sections and is not pinched.
5. Sonnenschutz montieren: If the shade (5) requires assembly, follow the specific instructions provided with the shade components. Typically, this involves attaching the shade fabric to a metal frame.
6. Attach Shade to Lamp Kopf: Carefully place the assembled shade (5) onto the lamp head (4). Secure it using the shade ring or finial, if applicable, by screwing it onto the lamp Buchse.
7. Glühbirne einsetzen: Screw a suitable light bulb (not included, refer to specifications for type and wattage) in die lamp Fassung. Nicht zu fest anziehen.
8. Position Lamp: Platzieren Sie das zusammengebaute lamp in its desired location, ensuring the power cord is not obstructed or under tension.

Bedienungsanleitung

1. An die Stromversorgung anschließen: Stecken Sie denampStecken Sie das Netzkabel in eine normale Steckdose.
2. Ein-/Ausschalten: Locate the step switch on the power cord. Press the switch with your foot to turn the lamp ON. Press it again to turn the lamp AUS.
3. Dimmbare Funktion: Dieses lamp is designed to be dimmable. If you wish to utilize this feature, ensure you use a dimmable bulb and connect the lamp to a compatible dimmer switch (not included). The integrated step switch provides simple on/off functionality.

Wartung

• Reinigung: Trennen Sie dasamp from the power source before cleaning. Use a soft, dry cloth to wipe the metal and wooden surfaces. For the linen shade, a lint roller or a soft brush can be used to remove dust. Avoid using abrasive cleaners, solvents, or polishes as they may damage the finish.
• Lampenwechsel: Stellen Sie sicher, dass die lamp is unplugged and the bulb has cooled completely before attempting to replace it. Unscrew the old bulb and screw in a new bulb of the correct type and wattage (refer to Specifications).
• Regelmäßige Kontrollen: Periodically check the power cord for any signs of damage or fraying. Ensure all connections remain secure.

Fehlerbehebung

Technische Daten

Garantie und Support

For specific warranty information, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. ORE International products typically come with a limited manufacturer's warranty.

Should you require technical assistance, replacement parts, or have questions not covered in this manual, please contact ORE International customer support. Contact details can usually be found on the manufacturer's official webauf der Website oder auf Ihrem Kaufbeleg.

Sie können auch die folgende besuchen: ORE Store on Amazon für zusätzliche Produktinformationen.