Cameo Light CLP64RGB10BS LED PAR Scheinwerfer – Benutzerhandbuch

1. Einleitung

Thank you for choosing the Cameo Light CLP64RGB10BS LED PAR Headlight. This device is designed for professional lighting applications, offering vibrant RGB color mixing and flexible control options. This manual provides essential information for safe and efficient operation, setup, and maintenance of your PAR headlight.

2. Sicherheitshinweise

• Lesen Sie diese Bedienungsanleitung vollständig durch, bevor Sie das Gerät in Betrieb nehmen.
• Bewahren Sie dieses Handbuch zum späteren Nachschlagen auf.
• Schließen Sie das Gerät immer an eine geerdete Steckdose an.
• Setzen Sie das Gerät weder Regen noch Feuchtigkeit aus.
• Sorgen Sie für ausreichende Belüftung rund um das Gerät, um eine Überhitzung zu vermeiden.
• Vermeiden Sie den direkten Augenkontakt mit der Lichtquelle.
• Vor Reinigungs- oder Wartungsarbeiten die Stromzufuhr unterbrechen.
• Reparaturen dürfen nur von qualifiziertem Personal durchgeführt werden.

3. Packungsinhalt

Prüfen Sie beim Auspacken, ob alle Artikel vorhanden sind:

• Cameo Light CLP64RGB10BS LED PAR Headlight
• Mounting Brackets (2 strokes)
• Bedienungsanleitung (dieses Dokument)
• Stromkabel

4. Produktüberschreitungview

The Cameo Light CLP64RGB10BS features 183 ultra-bright 10mm LEDs (60 red, 60 green, 63 blue) housed in a durable black casing. It includes a control panel for mode selection and DMX connectivity.

Abbildung 4.1: Front view of the Cameo Light CLP64RGB10BS LED PAR Headlight, showing the LED array and included power cable.

Abbildung 4.2: Seite view of the PAR headlight, illustrating its compact design and ventilation slots.

Abbildung 4.3: Hinteren view showing the control panel with LED display, mode buttons, DMX IN, and DMX OUT ports.

Abbildung 4.4: Detaillierte view of the 10mm LED array, highlighting the individual red, green, and blue diodes.

5. Einrichtung

5.1 Montage

The CLP64RGB10BS comes with two mounting brackets for versatile installation. These brackets can be used to stand the unit on a flat surface or to attach it to a truss or lighting stand using appropriate clamps (not included). Ensure the mounting surface or structure can safely support the weight of the fixture.

5.2 Stromanschluss

Connect the supplied power cable to the power input on the rear of the unit and then to a standard grounded electrical outlet. The device operates on standard AC power.

5.3 DMX-Anschluss (optional)

For DMX control, connect a DMX controller to the DMX IN port using a 3-pin DMX cable. If linking multiple units, connect the DMX OUT of the first unit to the DMX IN of the next, and so on. Terminate the last unit in the chain with a DMX terminator if experiencing signal issues.

6. Betrieb

6.1 Systemsteuerung

The control panel on the rear of the unit (refer to Figure 4.3) features an LED display and three buttons: MODE, UP, and DOWN. These buttons are used to navigate menus and adjust settings.

• MODUS: Cycles through the main menu options and confirms selections.
• UP: Erhöht Werte oder bewegt sich in den Menüoptionen nach oben.
• NIEDER: Verringert Werte oder navigiert durch Menüoptionen nach unten.

6.2-Betriebsmodi

The CLP64RGB10BS supports several operating modes:

• DMX-Modus: Allows external control via a DMX controller. The unit can be set to 4 or 6 DMX channels.
• Master/Slave-Modus: One unit acts as the master, controlling other slave units. Connect DMX OUT of the master to DMX IN of the first slave, and so on.
• Standalone-Modus: The unit operates independently using pre-programmed settings or sound-activated programs.

6.3 DMX-Kanalmodi

The device offers two DMX channel configurations:

• 4-Kanal-Modus: Typically controls Red, Green, Blue intensity, and Master Dimmer/Strobe.
• 6-Kanal-Modus: Provides more granular control, often including Red, Green, Blue intensity, Master Dimmer, Strobe, and Color Macros or other effects.

Refer to the DMX occupation diagram printed on the unit (Figure 4.3) for pin assignments: 1: Ground, 2: Signal (-), 3: Signal (+).

6.4 Sound-to-Light Functionality

In Standalone mode, the unit can react to music via its built-in microphone. Use the control panel to select sound-activated programs and adjust sensitivity if available.

7. Wartung

7.1 Reinigung

Regular cleaning helps maintain optimal light output and extends the lifespan of the unit. Disconnect power before cleaning.

• Use a soft, lint-free cloth to wipe the exterior casing.
• For the LED lens, use a soft cloth lightly dampened with a mild glass cleaner. Avoid harsh chemicals.
• Stellen Sie sicher, dass die Lüftungsöffnungen frei von Staub und Schmutz sind.

7.2 Speicherung

When not in use, store the PAR headlight in a dry, dust-free environment, preferably in its original packaging or a protective case.

8. Fehlerbehebung

9. Spezifikationen

10. Garantie und Support

Cameo products are designed for reliability and performance. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Cameo website. For technical support, service, or spare parts, please contact your local dealer or the Cameo customer service department.

Bitte bewahren Sie Ihren Kaufbeleg für eventuelle Garantieansprüche auf.