Horizon Digital Hanging Scale

Einführung

This manual provides essential instructions for the safe and effective operation, setup, and maintenance of your Horizon SF-918 OCS-L Digital Hanging Scale. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage or injury.

Image: The Horizon SF-918 OCS-L Digital Hanging Scale, showcasing its robust design with a top shackle and a lower weighing hook.

Sicherheitshinweise

• Do not exceed the maximum weight capacity of 300 kg (600 lbs). Overloading can damage the scale and pose a safety risk.
• Ensure the scale is securely suspended from a stable and appropriate support structure before attaching any load.
• Always stand clear of the load during weighing.
• Avoid dropping or subjecting the scale to severe impacts.
• Do not immerse the scale in water or expose it to excessive moisture. While durable, it is not waterproof.
• Außerhalb der Reichweite von Kindern aufbewahren.

Packungsinhalt

Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:

• Horizon SF-918 OCS-L Digital Hanging Scale
• Top Shackle (pre-attached)
• Bottom Weighing Hook
• 2 x AAA-Batterien

Image: The Horizon SF-918 OCS-L Digital Hanging Scale as packaged, showing the scale, hooks, and included AAA batteries.

Aufstellen

1. Einlegen der Batterie:
   • Suchen Sie das Batteriefach auf der Rückseite der Waage.
   • Öffnen Sie die Batterieabdeckung.
   • Legen Sie zwei (2) AAA-Batterien ein und achten Sie dabei auf die richtige Polarität (+/-).
   • Close the battery cover securely. Ensure the batteries are firmly seated to prevent intermittent power loss during use.
   

   Bild: Eine detaillierte view of the battery compartment, showing the correct placement of two AAA batteries.

2. Attaching the Bottom Hook:
   • The top shackle is typically pre-attached.
   • Attach the provided bottom weighing hook to the lower attachment point of the scale. Ensure it is securely fastened.
   

   Image: A close-up of the robust top shackle, indicating the secure attachment mechanism for suspending the scale.

Bedienungsanleitung

The scale features a 1-inch illuminated LCD display and three control buttons: Power, HOLD/UNIT, and TARE.

Bild: Eine detaillierte view of the scale's digital display and control buttons, showing the current weight reading and unit.

1. Ein-/Ausschalten:
   • Drücken Sie die Leistung Taste () to turn the scale ON. The display will show "88888" then "0.0" with the current unit.
   • Halten Sie die Leistung button for 3 seconds to turn the scale OFF.
2. Unit Selection (Kg/Lb/N):
   • With the scale ON and displaying "0.0", press the HALTEN/EINHEIT button to cycle through the available weighing units: Kilograms (kg), Pounds (lb), and Newtons (N).
3. Tara-Funktion:
   • To weigh items in a container, first hang the empty container on the hook.
   • Drücken Sie die TARA Drücken Sie diese Taste. Die Anzeige wird auf „0.0“ zurückgesetzt.
   • Geben Sie die zu wiegenden Gegenstände in den Behälter. Das Display zeigt das Nettogewicht der Gegenstände an.
4. Hold-Funktion:
   • While weighing a load, press the HALTEN/EINHEIT button to lock the current weight reading on the display. The "HOLD" indicator will appear.
   • Drücken Sie die HALTEN/EINHEIT button again to release the hold function and return to live weighing.
   • Note: This function holds the weight displayed at the moment the button is pressed, not necessarily the maximum weight achieved during the lift.
5. Wiegevorgang:
   • Ensure the scale is ON and displaying "0.0" in your desired unit.
   • Carefully attach the item to be weighed to the bottom hook.
   • Allow the load to stabilize. The display will show the weight. The reading stable time is typically less than 10 seconds.
   • Remove the load once the reading is taken.
6. Automatisches Ausschalten:
   • The scale will automatically turn off after approximately 3 minutes of inactivity to conserve battery life. This feature cannot be adjusted or disabled.

Wartung

• Reinigung: Wischen Sie die Waage mit einem weichen,amp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components. Avoid getting water inside the unit.
• Lagerung: Store the scale in a dry, cool place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.
• Batteriewechsel: When the battery indicator appears on the display, replace both AAA batteries promptly to ensure accurate readings and proper operation.

Fehlerbehebung

Waage lässt sich nicht einschalten:

Check battery installation. Ensure batteries are inserted with correct polarity and are fully charged. Replace batteries if necessary. Ensure battery contacts are clean and free from corrosion.

Ungenaue Messwerte:

Ensure the scale is suspended stably and not swinging. Verify the load is not touching any other surfaces. Check if the scale has been overloaded. Perform a tare operation before weighing.

Scale turns off unexpectedly:

This may be due to the 3-minute auto-off feature if no activity is detected. If it turns off during active weighing, check battery contact and ensure batteries are securely seated and not loose.

Display shows "O-Ld" or similar:

This indicates an overload condition. Remove the load immediately to prevent damage to the scale. Do not exceed the 300 kg / 600 lbs capacity.

Technische Daten

Garantie und Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Horizon webBewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.