HP H220 Host Bus Adapter

Einführung

The HP H220 Host Bus Adapter (HBA) is a factory-integrated component designed to provide high-performance connectivity for SAS (Serial Attached SCSI) and SATA (Serial Advanced Technology Attachment) storage devices. This adapter facilitates the connection of internal or external storage drives to a server or workstation, enabling data transfer and storage management. It is compatible with various operating systems, including Windows and Linux.

Sicherheitshinweise

• Always power off and unplug the computer system before installing or removing any internal components.
• Wear an anti-static wrist strap and work on an anti-static mat to prevent electrostatic discharge (ESD) damage to the HBA and other components.
• Handle the HBA by its edges; avoid touching the gold connectors or integrated circuits.
• Ensure proper ventilation within the computer chassis to prevent overheating.
• Do not attempt to modify or repair the HBA. Refer servicing to qualified personnel.

Packungsinhalt

Vergewissern Sie sich vor der Installation, dass alle Komponenten vorhanden sind:

• HP H220 Host Bus Adapter card
• Niedrigprofile Halterung (kann vorinstalliert oder separat beiliegend sein)

Image: The HP H220 Host Bus Adapter card shown with both a standard-height bracket and a separate low-profile bracket, illustrating the physical components included.

Setup und Installation

1. Bereiten Sie das System vor: Power down the computer system and disconnect all power cables. Open the computer chassis to access the internal components.
2. Select a PCIe Slot: Locate an available PCI Express (PCIe) expansion slot on your motherboard. The H220 HBA requires a PCIe x8 slot for optimal performance, though it may function in a PCIe x16 slot.
3. Install the HBA:
   • Remove the metal slot cover from the chosen PCIe slot on the computer chassis.
   • Carefully align the HBA's PCIe connector with the slot on the motherboard.
   • Apply even pressure to both ends of the card until it is fully seated in the slot. Ensure the retention clip (if present) engages.
   • Secure the HBA to the chassis with a screw or retention mechanism.
   

   Bild: Eine Draufsicht view of the HP H220 Host Bus Adapter, highlighting the PCIe connector and the two Mini-SAS ports, alongside a separate low-profile Klammer.

4. Speichergeräte anschließen:
   • Connect Mini-SAS to SATA/SAS breakout cables (not included) to the two Mini-SAS ports on the HBA.
   • Connect the other end of the breakout cables to your SAS or SATA storage drives. Ensure proper cable routing to avoid obstructing airflow.
   

   Bild: Ein schräger view of the HP H220 Host Bus Adapter, showing the heatsink, PCIe interface, and the two Mini-SAS connectors for attaching storage devices.

5. Gehäuse schließen und Gerät einschalten: Close the computer chassis, reconnect all power cables, and power on the system.
6. Treiberinstallation:
   • Upon first boot, the operating system (Windows or Linux) may automatically detect and install generic drivers.
   • For optimal performance and compatibility, download the latest drivers from the official Hewlett Packard Enterprise (HPE) support webWebsite für Ihr spezifisches Betriebssystem. Suchen nach "HP H220 HBA drivers".

Bedienungsanleitung

Once installed and drivers are loaded, the HP H220 HBA functions as a pass-through controller, presenting connected SAS and SATA drives directly to the operating system. This allows the operating system or software RAID solutions (e.g., ZFS, mdadm) to manage the drives.

• BIOS/UEFI-Konfiguration: In most cases, the HBA will be detected automatically. If necessary, consult your system's BIOS/UEFI settings to ensure the PCIe slot is enabled and configured correctly.
• Betriebssystemerkennung: Verify that the operating system recognizes the HBA and all connected drives. In Windows, check Device Manager under "Storage controllers". In Linux, use commands like lsscsi oder überprüfen /dev/sd* Einträge.
• Speicherverwaltung: Use your operating system's native disk management tools or third-party software to initialize, partition, and format the connected drives.

Wartung

• Staubentfernung: Periodically inspect the HBA and surrounding components for dust accumulation. Use compressed air to gently clean the heatsink and PCB to ensure proper cooling.
• Firmware-Updates: Check the HPE support website for any available firmware updates for the H220 HBA. Firmware updates can improve stability, performance, and compatibility. Follow the provided instructions carefully when performing firmware updates.
• Kabelintegrität: Ensure all Mini-SAS cables are securely connected and free from damage. Loose or damaged cables can lead to data corruption or connectivity issues.

Fehlerbehebung

Technische Daten

Garantieinformationen

This HP H220 Host Bus Adapter is covered by the standard manufacturer's warranty provided by Hewlett Packard Enterprise (HPE). The specific terms and duration of the warranty may vary by region and point of purchase. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the official HPE webWebsite oder wenden Sie sich an Ihren Händler.

Unterstützung

For technical assistance, driver downloads, firmware updates, or further information regarding the HP H220 Host Bus Adapter, please visit the official Hewlett Packard Enterprise (HPE) support webWebsite:

HPE-Support WebWebsite: https://www.hpe.com/support

When contacting support, please have your product model number (650933-B21) and any relevant system information readily available.