JJC TMC LCD Timer Remote Control Instruction Manual

Einführung

The JJC TMC LCD Timer Remote Control is a versatile device designed for advanced camera control, functioning as both a remote shutter release and a programmable intervalometer. It is ideal for various photography techniques, including time-lapse, long exposure, and self-portraits, by preventing camera shake and offering precise timing control.

Produkt überview

Komponenten und Bedienelemente

Familiarize yourself with the main components and controls of your JJC TMC remote control:

Bild 1: Front view of the JJC TMC remote control with key components labeled, including the control panel, shutter release button, LED light/lock button, arrow buttons, timer start/stop button, and SET button.

Bild 2: Detailed diagram illustrating the numbered parts of the JJC TMC controller and the various indicators on its LCD screen, such as selection cursor, timer display, LOCK indicator, low power indicator, timer active indicator, speaker ON/OFF, SET indicator, RELEASE indicator, and number of shots.

LCD-Anzeigen

• DE: Delay Timer (initial delay before sequence starts)
• BU: Bulb Timer (long exposure duration)
• INT: Interval Timer (time between shots)
• N: Number of Shots (total exposures)
• Selection Cursor: Indicates the currently adjustable parameter.
• Timer-Anzeige: Shows current time settings.
• Sperranzeige: Appears when buttons are locked.
• Low-Power-Anzeige: Warnt bei niedrigem Batteriestand.
• Timer Active Indicator: Shows when a timer sequence is running.
• Lautsprecher EIN/AUS: Indicates audio feedback status.
• SET Indicator: Appears when a setting is being adjusted.
• RELEASE Indicator: Appears when the shutter is being released.

Aufstellen

1. Einlegen der Batterie

1. Suchen Sie das Batteriefach auf der Rückseite der Fernbedienung.
2. Schieben Sie die Batterieabdeckung auf.
3. Legen Sie zwei AAA-Batterien ein und achten Sie dabei auf die richtige Polarität (+/-).
4. Schließen Sie die Batterieabdeckung fest.

2. Mit der Kamera verbinden

1. Ensure both the camera and the remote control are powered off.
2. Locate the remote control terminal on your Canon EOS camera (refer to your camera's manual for exact location).
3. Insert the remote control's cable plug firmly into the camera's remote control terminal.
4. Power on the remote control using the ON/OFF switch.

Bild 3: The JJC TMC remote control connected to a Canon camera via its cable, demonstrating proper connection for operation.

Bedienungsanleitung

Basic Shutter Release Function

• Halbes Drücken: Press the Shutter Release Button halfway down to activate autofocus.
• Volle Presse: Press the Shutter Release Button completely down to trigger the camera's shutter.
• Shutter Lock (for Bulb mode): For long exposures in Bulb mode, press the Shutter Release Button fully down and slide it upwards to lock it. This keeps the shutter open until you slide it back down.

Programming Timer Functions

The remote control allows programming of four main timer functions: Delay (DE), Bulb (BU), Interval (INT), and Number of Shots (N).

1. Einschalten: Schalten Sie die Fernbedienung mit dem EIN/AUS-Schalter ein.
2. Parameter auswählen: Verwenden Sie die Pfeiltasten (up/down) to move the selection cursor between DE, BU, INT, and N on the LCD display.
3. Wert anpassen: Once a parameter is selected, press the SET-Taste. The digits will flash. Use the Pfeiltasten (left/right) to select the digit to change, and the Pfeiltasten (up/down) to adjust the value (hours, minutes, seconds).
4. Einstellung bestätigen: Drücken Sie die SET-Taste again to confirm the value and move to the next digit or parameter.
5. Set Number of Shots (N): For 'N', you can set a value from 1 to 399. To set for unlimited shots, select 'N' and adjust until '--' is displayed.
6. Start Timer Sequence: After setting all desired parameters, press the Timer-Start/Stopp-Taste to begin the programmed sequence. The 'TIMER ACTIVE' indicator will appear.
7. Stop Timer Sequence: Drücken Sie die Timer-Start/Stopp-Taste again to stop an active sequence.

Sperrfunktion

To prevent accidental button presses during a timer sequence or long exposure, press the LED-Licht / Sperrtaste. The 'LOCK' indicator will appear on the LCD. Press it again to unlock.

Hintergrundbeleuchtung

Drücken Sie die LED-Licht / Sperrtaste briefly to activate the LCD backlight for visibility in low-light conditions. The backlight will automatically turn off after a few seconds.

Wartung

• Reinigung: Reinigen Sie die Fernbedienung mit einem weichen, trockenen Tuch. Verwenden Sie keine flüssigen Reiniger oder Lösungsmittel.
• Batteriewechsel: When the low power indicator appears, replace both AAA batteries promptly to ensure optimal performance.
• Lagerung: Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.
• Kabelpflege: Avoid bending or twisting the connection cable excessively to prevent damage.

Fehlerbehebung

Remote control does not power on:

Check if batteries are inserted correctly with proper polarity. Replace with fresh AAA batteries.

Camera does not respond to shutter release:

Ensure the cable is securely connected to both the remote and the camera. Verify the camera is powered on and in a compatible shooting mode (e.g., P, Av, Tv, M, Bulb). Check camera battery level.

Timer sequence does not start or stops unexpectedly:

Confirm all timer parameters (DE, BU, INT, N) are set correctly. Ensure the 'TIMER ACTIVE' indicator is on. Check battery level. Note that turning off the remote control will reset all programmed settings.

LCD display is dim or blank:

Replace batteries. Use the backlight function in low light conditions.

Technische Daten

Garantie und Support

Informationen zur Garantie und zum technischen Support finden Sie auf der offiziellen JJC-Website. webBesuchen Sie unsere Website oder wenden Sie sich an Ihren Händler. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.