Qanba Q1 PS3 & PC Joystick Instruction Manual

1. Produktüberschreitungview

The Qanba Q1 joystick is a high-performance arcade controller designed for use with PlayStation 3 and PC platforms. It features authentic Qanba arcade components, providing a responsive and durable gaming experience. This manual provides essential information for setting up, operating, and maintaining your Qanba Q1 joystick.

Hauptmerkmale:

• Compatible with PlayStation 3 and PC systems.
• Equipped with a Qanba joystick and 8 Qanba action buttons.
• Includes an adjustable and removable table clamp zur sicheren Befestigung.
• Comes with square, circle, and hex joystick gates for customization.
• Features rubber pads on the base for non-slip use on tables or laps.

Abbildung 1.1: Nahaufnahme view of the Qanba Q1 joystick and action buttons.

2. Einrichtungsanweisungen

2.1 Mit einem Gerät verbinden

1. Locate the USB cable stored in the compartment on the side of the joystick.
2. Connect the USB cable from the Qanba Q1 joystick to an available USB port on your PlayStation 3 console or PC.
3. The system should automatically detect the joystick. For PC, driver installation may be required, which typically occurs automatically upon first connection.

2.2 Attaching the Table Clamp

The Qanba Q1 includes an adjustable table clamp for enhanced stability during use.

1. Richten Sie die Klamp arms with the designated slots on the sides of the joystick unit.
2. Schieben Sie denamp arms into place until they are securely seated.
3. Place the joystick on a flat surface, such as a table or desk.
4. Ziehen Sie die Schrauben am Cl festamp until the joystick is firmly secured to the surface. Do not overtighten.

Figure 2.1: Qanba Q1 joystick with the table clamp beigefügt.

2.3 Changing Joystick Gates

The Qanba Q1 comes with interchangeable joystick gates (square, circle, hex) to suit different playstyles.

1. Carefully open the bottom panel of the joystick (if applicable, refer to specific model instructions for access).
2. Locate the existing joystick gate.
3. Gently unclip or unscrew the current gate and remove it.
4. Insert the desired gate (circle or hex) into position, ensuring it clicks or screws into place securely.
5. Schließen Sie die Bodenplatte.

3. Bedienungsanleitung

3.1 Grundlegende Bedienelemente

The Qanba Q1 features a standard arcade layout with a joystick and eight primary action buttons.

• Joysticks: Used for directional input.
• Aktionsschaltflächen: Eight buttons for in-game actions (e.g., punches, kicks, special moves).
• Home "Button: Functions as the PlayStation button on PS3, or a system menu button on PC.
• Auswahlknopf: Functions as the Select button on PS3.
• Start Knopf: Functions as the Start button on PS3.

3.2 Modusschalter

The joystick includes a mode switch to toggle between different input modes, typically for compatibility or specific game requirements. Refer to the labels near the switch for available modes (e.g., D-Pad, Left Analog Stick, Right Analog Stick).

3.3 Turbo-Funktion

The Turbo function allows for rapid, automatic pressing of a selected button. To activate:

1. Halten Sie die TURBO Taste.
2. Halten Sie TURBO, press the desired action button you wish to apply the turbo function to.
3. Release both buttons. The selected action button will now rapidly repeat when pressed.
4. Zum Deaktivieren wiederholen Sie den Vorgang: Halten Sie die Taste gedrückt TURBO and press the turbo-enabled action button again.

4. Wartung

4.1 Reinigung

• Wipe the surface of the joystick with a soft, dry cloth.
• Bei hartnäckigen Verschmutzungen leicht dampBefeuchten Sie das Tuch mit Wasser. Vermeiden Sie die Verwendung von scharfen Chemikalien oder Scheuermitteln.
• Ensure no liquids enter the internal components of the joystick.

4.2 Kabelmanagement

The Qanba Q1 features a convenient storage compartment for its USB cable.

• When not in use, carefully coil the USB cable and store it within the designated compartment to prevent damage and tangling.
• Avoid sharp bends or excessive force on the cable.

Figure 4.1: USB cable storage compartment.

5. Fehlerbehebung

5.1 Joystick Not Recognized

• USB-Verbindung prüfen: Ensure the USB cable is firmly connected to both the joystick and the console/PC. Try a different USB port.
• Gerät neu starten: Restart your PlayStation 3 or PC.
• PC-Treiber: For PC, ensure that necessary drivers are installed. Windows typically installs these automatically, but manual installation may be required in some cases. Check Device Manager for any unrecognized devices.
• Versuchen Sie es mit einem anderen Gerät: If possible, test the joystick on another compatible PS3 or PC to determine if the issue is with the joystick or the original device.

5.2 Tasten oder Joystick reagieren nicht

• Modusschalter prüfen: Ensure the mode switch is set to the correct input mode for your game or system.
• Spieleinstellungen: Verify that the game's controller settings are configured correctly for a joystick/arcade stick.
• Firmware Update: Check the Qanba official website for any available firmware updates for your Q1 model.

6. Spezifikationen

7. Garantie und Support

For warranty information, please refer to the documentation included with your purchase or visit the official Qanba website. For technical support or further assistance, please contact Qanba customer service through their official channels.

Qanba Official WebWebsite: qanba.com