Puig 6320H Multi-Adjustable Clip-On Visor Instruction Manual

1. Einleitung

This manual provides instructions for the proper installation, operation, and maintenance of your Puig 6320H Light Smoke Multi-Adjustable Clip-On Visor. This visor is designed to enhance wind protection and reduce turbulence and noise on your motorcycle windshield.

Zu den Hauptmerkmalen gehören:

• Multi-adjustable design for personalized wind deflection.
• Easy clip-on mounting, requiring no drilling into your existing windshield.
• Designed for quick installation and removal.

Image 1.1: The Puig 6320H Light Smoke Multi-Adjustable Clip-On Visor.

2. Sicherheitshinweise

Please read all safety information before installation and use. Failure to follow these instructions may result in product damage, injury, or property damage.

• Sichere Installation: Ensure the visor is securely attached to the windshield according to the installation instructions. A loose visor can detach during operation, posing a hazard.
• Sichtweite: Always ensure the visor does not obstruct your field of vision. Adjust its position to maintain clear visibility.
• Materialverträglichkeit: This product is made of acrylic. Avoid using harsh chemicals or abrasive materials for cleaning, as this can damage the visor.
• Warnung zu Proposition 65: Dieses Produkt kann Chemikalien enthalten, die im US-Bundesstaat Kalifornien als krebserregend und fortpflanzungsschädigend gelten. Weitere Informationen finden Sie unter [Link einfügen]. www.P65Warnings.ca.gov.

3. Packungsinhalt

Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:

• 1 x Puig 6320H Multi-Adjustable Clip-On Visor
• Mounting hardware (clips, screws, washers)

If any parts are missing or damaged, please contact Puig customer support immediately.

4. Einrichtung und Installation

The Puig 6320H visor features a clip-on installation method, eliminating the need for drilling into your motorcycle's windshield.

1. Bereiten Sie die Windschutzscheibe vor: Ensure your motorcycle's windshield is clean and free of debris where the visor will be attached.
2. Assemble Mounting Clips: Attach the provided mounting clips to the visor. Ensure all screws and washers are used as per the diagram. Do not overtighten.
3. Positionieren Sie das Visier: Carefully place the assembled visor onto the top edge of your motorcycle's windshield. The clips should securely grip the windshield.
4. Secure the Visor: Tighten the clips to firmly hold the visor in place. Ensure the visor is centered and stable. Verify that there is no movement or looseness.
5. Endkontrolle: Gently attempt to move the visor by hand to confirm it is securely mounted and will not detach during riding.

Image 4.1: Diagram illustrating the clip-on installation process. Note: Drilling is not required.

Image 4.2: The Puig 6320H visor shown installed on a motorcycle windshield.

5. Betrieb und Einstellung

The Puig 6320H visor is multi-adjustable, allowing you to fine-tune its position for optimal wind protection and reduced noise.

• Winkel einstellen: The visor features adjustable hinges on each side. Loosen the adjustment points slightly to change the angle of the visor relative to your main windshield.
• Höhe einstellen: The clips allow for minor vertical adjustment along the top edge of your windshield.
• Testing Adjustments: After making adjustments, ensure all fasteners are tightened. Test the new position at low speeds in a safe environment to confirm desired wind deflection and stability before riding at higher speeds.

Notiz: When adjusting, manipulate both sides of the visor simultaneously and carefully to avoid stressing the hinges. Avoid forcing adjustments.

6. Wartung

Proper care will extend the life and maintain the clarity of your Puig visor.

• Reinigung: Clean the visor with a soft cloth and mild soap and water. Avoid using abrasive cleaners, solvents, or ammonia-based products, as these can damage the acrylic material.
• Inspektion: Periodically inspect the visor and its mounting hardware for any signs of wear, damage, or looseness. Tighten any loose fasteners.
• Lagerung: When not in use for extended periods, store the visor in a clean, dry place away from direct sunlight and extreme temperatures.

7. Fehlerbehebung

In diesem Abschnitt werden häufig auftretende Probleme behandelt.

• Visor feels loose or detaches:
  • Ensure all mounting screws and clips are securely tightened.
  • Verify that the clips are correctly gripping the windshield without obstruction.
  • Inspect the windshield for any damage that might prevent a secure attachment.
• Increased noise or turbulence after installation:
  • Adjust the angle and height of the visor. Small changes can significantly impact airflow.
  • Experiment with different positions to find the optimal setting for your riding posture and motorcycle.
• Missing parts upon delivery:
  • Refer to the "Package Contents" section. If parts are missing, contact Puig customer support immediately for assistance.

8. Spezifikationen

Kompatible Modelle

This visor is designed for universal fitment on various motorcycle windshields. Specific compatible models include, but are not limited to:

Abbildung 8.1: Beispielample of compatible Yamaha Tenere models.

9. Gewährleistung

The Puig 6320H Multi-Adjustable Clip-On Visor is covered by a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims, please refer to the documentation included with your purchase or contact Puig directly.

10. Unterstützung

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Puig customer support.

• Online: Besuchen Sie die offizielle Puig-Website. webWebsite mit Supportressourcen und Kontaktinformationen.
• E-Mail/Telefon: Refer to your product packaging or the Puig webDie Website enthält die aktuellen Kontaktdaten.