NaceCare GVE 370 "George" Wet/Dry/ Extractor Vacuum Instruction Manual

1. Produktüberschreitungview

The NaceCare GVE 370 "George" is a versatile all-in-one machine designed for both wet and dry cleaning applications. It excels at dry vacuuming, wet vacuuming, scrubbing and drying hard floors, deep cleaning carpets, cleaning upholstery, and even unblocking sinks. Its robust design ensures professional cleaning standards and exceptional results for extensive and long-hour use.

Figure 1: NaceCare GVE 370 "George" Wet/Dry/ Extractor Vacuum.

This image displays the main unit of the NaceCare GVE 370 "George" vacuum cleaner, showcasing its green body, black top, and the attached hose with a clear extraction nozzle.

2. Packungsinhalt

Vor Beginn der Arbeiten sicherstellen, dass alle Komponenten in der Verpackung vorhanden sind:

• NaceCare GVE 370 "George" main unit
• 26A Accessory Kit (includes various nozzles and tools)
• Hoses for wet and dry operation
• Netzkabel
• Bedienungsanleitung (dieses Dokument)

Figure 2: Included 26A Accessory Kit components.

This image shows the comprehensive 26A accessory kit, including various hoses, extension wands, floor tools, and specialized nozzles for different cleaning tasks.

3. Einrichtung

3.1 Erste Montage

1. Packen Sie alle Komponenten aus dem Karton aus.
2. Ensure the main unit is placed on a stable, level surface.
3. Attach the appropriate hose for your intended use (dry or wet).
4. Connect the desired accessory (e.g., floor tool, upholstery nozzle) to the end of the hose.
5. Stecken Sie das Netzkabel in eine geeignete Steckdose.

3.2 Preparing for Wet Operation (Extraction/Wet Vacuuming)

• Remove the motor head from the main unit.
• Fill the clean water tank with water and appropriate cleaning solution (refer to solution manufacturer's instructions).
• Ensure the dirty water tank is empty and properly seated.
• Replace the motor head, ensuring it is securely latched.
• Connect the solution hose from the machine to the spray trigger on the wand.

3.3 Preparing for Dry Operation

• Remove the motor head from the main unit.
• Stellen Sie sicher, dass der Trockenfilter sauber und ordnungsgemäß installiert ist.
• Insert a new dust bag if needed.
• Replace the motor head, ensuring it is securely latched.

4. Bedienungsanleitung

4.1 Trockensaugen

For general dry vacuuming of carpets and hard floors:

1. Ensure the machine is set up for dry operation (dry filter and dust bag installed).
2. Select the appropriate dry floor tool.
3. Turn on the vacuum motor using the power switch.
4. Move the floor tool slowly and steadily over the surface to be cleaned.

4.2 Wet Vacuuming (Spill Pickup)

For picking up liquid spills:

1. Ensure the machine is set up for wet operation (no dry filter or dust bag, dirty water tank ready).
2. Attach the wet pick-up tool.
3. Turn on the vacuum motor.
4. Move the wet pick-up tool over the liquid spill to suction it into the dirty water tank.

4.3 Carpet and Upholstery Extraction

For deep cleaning carpets and upholstery:

1. Ensure the machine is set up for wet operation with the clean water tank filled with solution.
2. Attach the carpet or upholstery extraction tool.
3. Turn on both the vacuum motor and the pump switch.
4. Press the spray trigger on the wand to dispense cleaning solution while simultaneously moving the tool over the surface to extract the dirty solution.
5. Work in small sections, overlapping passes to ensure thorough cleaning and extraction.

4.4 Reinigung von Hartböden

George takes water and detergent from the clean water tank, breaks down grease and grime, and cleans the floor with his unique dual scrub brush. He then sucks-up the water into the dirty water tank, leaving your floors clean, hygienic, and touch dry.

Figure 3: Hard floor cleaning in progress.

This image shows the George vacuum's floor tool actively cleaning a dirty tiled floor, with a clear distinction between the cleaned and uncleaned areas, highlighting its effectiveness.

Abbildung 4: Bspample of hard floor cleaning with foam.

This image illustrates the hard floor cleaning process, showing the floor tool moving across a dark tiled surface with cleaning foam, indicating the scrubbing action.

5. Wartung

5.1 Entleeren und Reinigen von Tanks

• After wet use, always empty and rinse both the clean and dirty water tanks thoroughly.
• Allow tanks to air dry before storage to prevent mold and odors.

5.2 Filterwartung

• For dry use, regularly check and clean the disk filter. Tap off loose debris or rinse if washable (refer to specific filter instructions).
• Replace the dry filter when it shows signs of wear or reduced performance.

5.3 Pflege von Schläuchen und Zubehör

• Rinse hoses and accessories after wet use to remove any residue.
• Store hoses neatly to prevent kinks or damage.
• Inspect all attachments for blockages or damage before and after each use.

6. Fehlerbehebung

• Keine Saugkraft:
  • Check if the hose is securely connected to the machine and the tool.
  • Ensure the tanks are properly sealed and the motor head is latched.
  • Verify that the filter is not clogged.
  • Check for blockages in the hose or tools.
• Sprayer Not Working:
  • Ensure the clean water tank has sufficient solution.
  • Check if the pump switch is turned on.
  • Inspect the solution hose for kinks or blockages.
  • Clean the spray nozzle if it appears clogged.
• Maschine lässt sich nicht einschalten:
  • Vergewissern Sie sich, dass das Netzkabel fest in einer funktionierenden Steckdose eingesteckt ist.
  • Überprüfen Sie den Netzschalter am Gerät.
  • Ensure the motor head is correctly seated and latched.

7. Spezifikationen

8. Garantie und Support

The NaceCare GVE 370 "George" comes with a 2 Jahr Garantie on switches, motors, and electrical parts. For warranty claims or technical support, please contact NaceCare Solutions directly or visit their official webWebsite.

Für weitere Informationen und Unterstützung besuchen Sie bitte die NaceCare Store on Amazon.