1. Einleitung
This manual provides detailed instructions for the installation, operation, and maintenance of your Urmet Bibus Comfort 1172/45 intercom system. This system is designed to provide reliable communication and door entry control, featuring 6 distinct melodies for call signaling. Please read this manual thoroughly before attempting installation or operation to ensure proper function and safety.
2. Sicherheitshinweise
Beachten Sie stets die folgenden Sicherheitsvorkehrungen, um Verletzungen und Schäden am Gerät zu vermeiden:
- Die Installation muss von einem qualifizierten Elektriker gemäß den örtlichen Elektrovorschriften durchgeführt werden.
- Vor jeglichen Installations-, Wartungs- oder Fehlersucharbeiten die Stromzufuhr unterbrechen.
- Setzen Sie das Gerät weder Feuchtigkeit noch extremen Temperaturen oder direkter Sonneneinstrahlung aus.
- Versuchen Sie nicht, das Gerät selbst zu öffnen oder zu reparieren. Überlassen Sie alle Wartungsarbeiten qualifiziertem Fachpersonal.
- Use only Urmet approved accessories and spare parts.
3. Packungsinhalt
Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:
- Urmet Bibus Comfort 1172/45 Intercom Unit
- Montagehalterung
- Befestigungsschrauben und Dübel
- Benutzerhandbuch (dieses Dokument)
Figure 1: Urmet Bibus Comfort 1172/45 Intercom Unit. This image displays the main intercom unit, typically a rectangular device with a speaker, microphone, and call button, designed for indoor use.
4. Einrichtung und Installation
Follow these steps for proper installation of the Urmet Bibus Comfort 1172/45 intercom system:
- Vorbereitung: Ensure the power supply to the installation area is disconnected at the main circuit breaker.
- Montage:
- Wählen Sie einen geeigneten Standort in Innenräumen, fernab von direkten Wärmequellen oder Feuchtigkeit.
- Verwenden Sie die Montagehalterung als Schablone, um die Bohrpunkte an der Wand zu markieren.
- Bohren Sie Löcher und setzen Sie Dübel ein. Befestigen Sie die Montagehalterung mit den mitgelieferten Schrauben an der Wand.
- Verdrahtung:
- Connect the system wiring to the terminals on the intercom unit according to the wiring diagram provided in the separate installation guide (if applicable) or on the unit itself. Pay close attention to polarity.
- Stellen Sie sicher, dass alle Verbindungen sicher und isoliert sind.
- Endmontage: Carefully attach the intercom unit to the mounted bracket, ensuring it clicks securely into place.
- Einschalten: Restore power to the system. The unit should power on, indicated by a status light (if present).
5. Bedienungsanleitung
The Urmet Bibus Comfort 1172/45 is designed for straightforward operation:
5.1 Empfangen eines Anrufs
- When a visitor presses the call button on the outdoor unit, the indoor intercom unit will ring with one of the 6 pre-programmed melodies.
- To answer the call, lift the handset (if applicable) or press the talk button.
- To end the call, replace the handset or press the talk button again.
5.2 Türöffnung
To open the door for a visitor:
- During an active call, press the door release button (usually marked with a key symbol).
- The door will unlock for a short period, allowing the visitor to enter.
5.3 Melody Selection (if applicable)
Some models allow selection of the ringing melody. Refer to the specific controls on your unit. Typically, a small switch or button allows cycling through the 6 available melodies.
6. Wartung
The Urmet Bibus Comfort 1172/45 requires minimal maintenance:
- Reinigung: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture.
- Inspektion: Periodically check for loose connections or visible damage. If any damage is found, disconnect power and contact a qualified technician.
7. Fehlerbehebung
If you encounter issues with your intercom system, refer to the following table:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| No sound from intercom unit. | Kein Strom; lose Verkabelung; defektes Gerät. | Check power supply; verify wiring connections; contact support if unit is faulty. |
| Türöffner funktioniert nicht. | Wiring issue to door strike; faulty door strike; faulty intercom unit. | Check wiring to door strike; test door strike independently; contact support. |
| Intercom rings continuously or not at all. | Stuck call button on outdoor unit; wiring fault; unit malfunction. | Inspect outdoor unit button; check wiring; contact support. |
If the problem persists after attempting these solutions, please contact Urmet customer support.
8. Spezifikationen
- Modell: Urmet Bibus Comfort 1172/45
- Melodien: 6 wählbar
- Stromversorgung: (Typically 12-24V AC/DC, specific to Bibus system - information not provided)
- Abmessungen: (information not provided)
- Gewicht: Approximately 150 kg (Note: This weight from product data is unusually high for an intercom unit and may be a data entry error. Please refer to the product packaging for accurate weight information.)
- Betriebstemperatur: (information not provided)
Note: The listed item weight of 150 kg from the product specifications is unusually high for an intercom unit and may be a data entry error. Please refer to the product packaging for accurate weight information.
9. Garantie und Support
Urmet products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Urmet website. For technical support, spare parts, or service inquiries, please contact your local Urmet distributor or customer service center.
Urmet Customer Service:
- WebWebsite: www.urmet.com
- Kontaktinformationen: Weitere Informationen finden Sie im webWebsite für regionale Kontaktdaten.