Marvel Spiderman Hand 3D Deco LED Wall Light User Manual

Einführung

The Marvel Spiderman Hand 3D Deco LED Wall Light is designed to provide a unique and engaging lighting solution for any room. This cordless, battery-operated nightlight features energy-efficient LED bulbs and includes a graphic wall sticker to create a dynamic visual effect, making it appear as if Spider-Man has broken through your wall.

This product is officially licensed by 3D Light FX and meets high quality and safety standards, including CPSIA & PTPA approvals.

Sicherheitshinweise

• Achten Sie darauf, dass die Batterien mit der richtigen Polarität (+/-) eingelegt werden.
• Mischen Sie keine alten und neuen Batterien oder verschiedene Batterietypen.
• Entfernen Sie die Batterien, wenn die Leuchte längere Zeit nicht verwendet wird.
• Keep out of reach of small children when installing or replacing batteries.
• Dieses Produkt ist nur für den Gebrauch in Innenräumen vorgesehen.
• The LED bulbs are energy-efficient and designed not to get hot to the touch.

Lieferumfang

Prüfen Sie nach dem Öffnen der Verpackung, ob alle Komponenten vorhanden sind:

• 1 x Marvel Spiderman Hand 3D Deco LED Wall Light unit
• 1 x 3D Crack Decal Sticker
• Befestigungsschrauben

Figure 1: Product packaging showing the light unit and wall sticker.

Setup und Installation

Befolgen Sie diese Schritte für eine ordnungsgemäße Installation:

1. Einlegen der Batterie: Locate the battery compartment on the back of the light unit. Insert 3 x AAA batteries (not included), ensuring correct polarity. Close the compartment securely.
2. Prepare Wall Surface: Choose a clean, dry, and smooth wall surface for installation.
3. Apply Crack Decal: Carefully peel the 3D crack decal sticker from its backing. Position it on the wall where you intend to mount the light. The decal serves as a template for screw placement and enhances the visual effect. Smooth out any air bubbles.
4. Montage der Leuchte: Align the mounting holes on the back of the light unit with the designated spots on the crack decal. Use the provided screws to securely attach the light to the wall. Ensure the light is firmly mounted and does not wobble.

Figure 2: Spiderman Hand light mounted on a wall with the crack decal.

Abbildung 3: Ein weiterer view of the Spiderman Hand light installed with the crack decal.

Bedienungsanleitung

The Spiderman Hand 3D Deco LED Wall Light is designed for simple operation:

• Ein-/Ausschalten: Locate the simple switch on the light unit. Toggle the switch to turn the light ON or OFF.
• Automatische Abschaltung: The light features an automatic timer that will turn the unit off after approximately 60 minutes to conserve battery life.

Figure 4: The Spiderman Hand light illuminated, creating a nightlight effect.

Wartung

• Batteriewechsel: When the light dims or stops working, replace all 3 AAA batteries with new ones. Always use fresh batteries of the same type.
• Reinigung: Wipe the light unit and decal with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Lampenwechsel: The LED bulbs are designed for long-lasting use and do not require replacement.

Fehlerbehebung

Technische Daten

Garantie und Support

This product is manufactured to high quality standards and carries CPSIA & PTPA approvals, ensuring its safety and compliance. For any inquiries or support, please refer to the contact information provided on the product packaging or the official Marvel webWebsite.