Einführung
Thank you for choosing the Beurer BF 220 Body Composition Digital Scales. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new scales. Please read these instructions carefully before first use and keep them for future reference.
The Beurer BF 220 scales are designed to measure body weight, body fat, body water, and muscle rate, providing a comprehensive overview Ihrer Körperzusammensetzung.
Sicherheitshinweise
- Always place the scales on a firm, level surface to ensure accurate measurements.
- Do not use the scales in areas with high humidity or near water.
- The scales are for personal use only and not intended for medical or commercial purposes.
- Reinigen Sie die Waage mit adamp cloth; do not use abrasive cleaning agents.
- Außerhalb der Reichweite von Kindern aufbewahren.
- Individuals with pacemakers or other medical implants should not use the body composition analysis function. Consult your doctor before use.
- Die maximale Tragfähigkeit beträgt 180 kg. Diese Grenze darf nicht überschritten werden.
Packungsinhalt
- 1 x Beurer BF 220 Body Composition Digital Scales
- 1 x Bedienungsanleitung (evtl. nicht in deutscher Sprache).
- Batteries (not always included, check product packaging)
Aufstellen
1. Einlegen der Batterie
Locate the battery compartment on the underside of the scales. Insert the required batteries, ensuring correct polarity (+/-). Close the battery compartment securely.
2. Unit Selection (Kg/Lb/St)
After battery installation, or by pressing a dedicated button (often on the underside or near the display), you can select your preferred unit of measurement: kilograms (kg), pounds (lb), or stones (st). The scales feature a Kg/Lb/St selector.
3. Erstplatzierung
Place the scales on a hard, flat, and stable surface. Avoid carpets or uneven flooring, as this can affect accuracy.
Bedienungsanleitung
Grundwägung
- Step onto the scales barefoot. The scales will automatically turn on due to the "Automatic start" feature.
- Bleiben Sie stehen, bis Ihr Gewicht angezeigt wird und sich stabilisiert hat.
- The scales will automatically turn off after a few seconds of inactivity ("Automatic stop").
Body Composition Measurement
The Beurer BF 220 scales can determine weight, body fat, body water, and muscle rate using bioelectrical impedance analysis (BIA). For accurate results, ensure your feet are clean and make good contact with the brushed stainless steel electrodes.
- Step onto the scales barefoot.
- Wait for your weight to be displayed.
- The scales will then proceed to measure and display your body fat, body water, and muscle rate sequentially.
- For consistent results, measure at the same time of day, preferably in the morning before breakfast or exercise.
Wartung
Reinigung
Clean the scales regularly with a slightly damp cloth. Do not use harsh or abrasive cleaning agents, as these can damage the surface or electrodes. Do not immerse the scales in water.
Lagerung
Store the scales in a dry, cool place. Avoid extreme temperatures and direct sunlight. If not in use for an extended period, it is recommended to remove the batteries to prevent leakage.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| "Err" or "OL" displayed | Überlastung oder Messfehler. | The maximum load capacity is 180 kg. Ensure the weight does not exceed this limit. Step off and then back on the scales. |
| Ungenaue Messwerte | Scales on an uneven surface, low battery, or movement during measurement. | Place scales on a firm, level surface. Replace batteries if low. Stand still during measurement. |
| Keine Anzeige | Die Batterien sind leer oder falsch eingelegt. | Prüfen Sie die Batteriepolarität und tauschen Sie die Batterien gegebenenfalls aus. |
| Body composition not measured | Feet not making proper contact with electrodes, or user has medical implants. | Ensure feet are clean and make full contact with the stainless steel electrodes. If you have medical implants, this function may not work or is not recommended. |
Technische Daten
- Modell: Beurer BF 220
- Messfunktionen: Weight, Body Fat, Body Water, Muscle Rate
- Anzeige: XXL white illuminated LCD screen, 40 mm number size
- Oberflächenmaterial: Safety glass (32 x 32 cm, 8mm thick)
- Elektroden: Gebürsteter Edelstahl
- Tragfähigkeit: 180 kg
- Auslesegenauigkeit: 100 g
- Abmessungen: Ca. 32 x 32 x 2.5 cm (L x B x H)
- Merkmale: Automatic start and stop, Kg/Lb/St selector, Overload indicator, Backlit Display
- Artikelgewicht: 2.3 Kilogramm
- GTIN: 04211125748135
Garantie und Support
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Beurer webBewahren Sie Ihren Kaufbeleg für eventuelle Garantieansprüche auf.
For further assistance, you may contact Beurer customer service directly.