Einführung
Vielen Dank für Ihren Einkauf.asing the Adesso Trio Floor Lamp, Model 4305-22. This versatile floor lamp wurde entwickelt, um ample lighting and convenient storage solutions within a compact footprint. Featuring three individual lights with pull chain switches and two clear acrylic shelves, it enhances any room with both style and functionality. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.
Figure 1: Adesso Trio Floor Lamp, Model 4305-22
Sicherheitshinweise
- Always disconnect the power supply before cleaning, changing bulbs, or performing any maintenance.
- Verwenden Sie nur Glühbirnen des angegebenen Typs und der angegebenen Wattzahl.tage (three 40W incandescent or equivalent CFL/LED bulbs). Exceeding the maximum wattage can create a fire hazard.
- Dieses lamp is intended for indoor use only. Do not expose to moisture or extreme temperatures.
- Stellen Sie sicher, dass die lamp wird auf einer stabilen, ebenen Fläche platziert, um ein Umkippen zu verhindern.
- Keep the electrical cord away from heat sources, sharp edges, and wet areas.
- The clear acrylic shelves are for light decorative items or storage. Do not place heavy objects on them (maximum weight capacity per shelf is approximately 1.5 lbs).
Packungsinhalt
Bitte prüfen Sie vor Beginn der Montage, ob alle Komponenten vorhanden sind:
- Lamp Base (Brushed Steel)
- Vertical Poles (3 sections per pole, total 3 poles)
- White Linen Cylindrical Shades (3 pieces)
- Clear Acrylic Shelves (2 pieces)
- Pull Chain Switches (3 pieces, pre-attached to lamp Steckdosen)
- Hardware Pack (screws, washers, etc., if applicable)
- Netzkabel
Einrichtung und Montage
Follow these steps to assemble your Adesso Trio Floor Lamp. No special tools are required.
- Komponenten auspacken: Nehmen Sie alle Teile vorsichtig aus der Verpackung und legen Sie sie auf eine saubere, weiche Unterlage, um Kratzer zu vermeiden.
- Stangen zusammenbauen: Connect the vertical pole sections by gently twisting them clockwise until secure. Ensure the wiring passes freely through the poles.
- Basis anbringen: Securely attach the assembled poles to the brushed steel lamp Base.
- Regale installieren: Slide the two clear acrylic shelves onto the poles at the desired heights. The shelves are designed to fit snugly between the pole sections.
- L anbringenamp Steckdosen: Ensure the three lamp sockets with pre-attached pull chains are securely fastened to the top of each pole.
- Place Shades: Carefully place each white linen cylindrical shade over its respective lamp Buchse.
- Leuchtmittel einsetzen: Screw three 40-watt incandescent or equivalent CFL/LED bulbs (not included) into the lamp Steckdosen. Nicht zu fest anziehen.
- Position Lamp: Platzieren Sie das lamp in its desired location, ensuring the power cord is not pinched or obstructed.
Abbildung 2: Detail des lamp's base and shades.
Bedienungsanleitung
- Stromanschluss: Stecken Sie denamp's clear power cord into a standard electrical outlet. The lamp is smart outlet compatible for integration with smart home systems.
- Ein-/Ausschalten: Each of the three lights is controlled by its own pull chain switch. Pull the chain once to turn the light on, and pull it again to turn it off. This allows for customizable lighting, enabling you to illuminate one, two, or all three lights as needed.
Figure 3: Key features of the Adesso Trio Floor Lamp.
Wartung
- Reinigung: Zum Reinigen des lamp, ensure it is unplugged. Wipe the brushed steel base and poles with a soft, dry cloth. For the white linen shades, use a lint roller or a soft brush to remove dust. The clear acrylic shelves can be wiped with a damp cloth and mild soap, then dried thoroughly. Avoid abrasive cleaners.
- Lampenwechsel: Trennen Sie immer den lamp before replacing bulbs. Allow old bulbs to cool completely before removal. Replace with three 40-watt incandescent or equivalent CFL/LED bulbs.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Lamp geht nicht an. | 1. Lamp nicht eingesteckt. 2. Bulb is loose or burnt out. 3. Die Steckdose funktioniert nicht. | 1. Ensure the power cord is securely plugged into an active outlet. 2. Tighten or replace the bulb(s). 3. Test the outlet with another device or check your circuit breaker. |
| Licht flackert. | 1. Glühbirne locker. 2. Falscher Glühbirnentyp/Watttage. 3. Glühlampe defekt. | 1. Tighten the bulb(s). 2. Ensure bulbs meet specifications (40W incandescent or equivalent CFL/LED). 3. Replace the flickering bulb. |
| Lamp ist instabil. | 1. Not on a level surface. 2. Poles not fully tightened. | 1. Bewege das lamp auf eine ebene, stabile Oberfläche. 2. Re-tighten all pole connections. |
Technische Daten
- Modellnummer: 4305-22
- Abmessungen (T x B x H): 11.7"T x 14"B x 68"H
- Artikelgewicht: 15.2 Pfund
- Materialart: Metal (Brushed Steel Base), Linen (Shades), Acrylic (Shelves)
- Schattenfarbe: Weiß
- Anzahl der Lichtquellen: 3
- Lampensockel: E26 Mittel
- Wastage: Max 40 watts per bulb (Incandescent or equivalent CFL/LED)
- Schaltertyp: Pull Chain (3 individual switches)
- Energiequelle: Kabelgebundene Elektrik
- Kabellänge: Ungefähr 5 Fuß (60 Zoll)
- Installationstyp: Freistehende
- Verwendung im Innen- und Außenbereich: Nur für den Innenbereich
Figure 4: Dimensions of the Adesso Trio Floor Lamp.
Garantieinformationen
Manufacturer Warranty Description: N/a.
For specific warranty details or to inquire about product guarantees, please refer to the documentation provided at the time of purchase or contact the retailer directly.
Kundenservice
If you have any questions, require assistance with assembly, or encounter issues not covered in this manual, please contact the retailer where you purchased the product or visit the official Adesso webSite für Supportressourcen.
Adesso Official WebWebsite: www.adessohome.com