1. Einleitung
Thank you for choosing the Fluid Audio C5 2-Way 5 Inch Active Studio Monitor. This manual provides essential information for the proper setup, operation, and maintenance of your studio monitors. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
2. Sicherheitshinweise
- Energiequelle: Connect the unit only to a power supply of the type specified in this manual or on the unit. Ensure the voltage entspricht Ihrer Region (110 V oder 220 V).
- Belüftung: Die Lüftungsöffnungen dürfen nicht blockiert werden. Die Installation muss gemäß den Anweisungen des Herstellers erfolgen.
- Wasser und Feuchtigkeit: Verwenden Sie dieses Gerät nicht in der Nähe von Wasser und setzen Sie es keinem Tropf- oder Spritzwasser aus.
- Hitze: Installieren Sie das Gerät nicht in der Nähe von Wärmequellen wie Heizkörpern, Heizregistern, Öfen oder anderen Geräten (einschließlich ampKonverter (Lüfter), die Wärme erzeugen.
- Reinigung: Nur mit trockenem Tuch reinigen.
- Wartung: Überlassen Sie alle Wartungsarbeiten qualifiziertem Servicepersonal. Eine Wartung ist erforderlich, wenn das Gerät auf irgendeine Weise beschädigt wurde, z. B. wenn das Netzkabel oder der Stecker beschädigt sind, Flüssigkeit in das Gerät verschüttet wurde oder Gegenstände hineingefallen sind, das Gerät Regen oder Feuchtigkeit ausgesetzt war, nicht normal funktioniert oder fallengelassen wurde.
3. Packungsinhalt
The Fluid Audio C5 2-Way 5 Inch Active Studio Monitor package includes:
- Fluid Audio C5 Studio Monitor Speaker (Pair)
- Abnehmbares Netzkabel
- Bare speaker wire
- 3.5mm headphone to RCA cable
- Acoustic Isolation Pads
4. Produktüberschreitungview
4.1 Vorderseite überview
The front panel features the 5-inch woofer and 1-inch tweeter, designed for accurate sound reproduction. The woofer is responsible for low-frequency sounds, while the tweeter handles high frequencies.

Abbildung 1: Vorderseite view of the Fluid Audio C5 Studio Monitor.
4.2 Rückwand überview
The rear panel houses all the input connections, power switch, volume control, and acoustic tuning options. These controls allow you to adapt the monitor's sound to your specific listening environment.

Abbildung 2: Rückseite view of the Fluid Audio C5 Studio Monitor.
5. Einrichtung
5.1 Platzierung
Position your C5 monitors on a stable surface, ideally at ear level, forming an equilateral triangle with your listening position. Ensure there is adequate space around the monitors for proper ventilation.
5.2 Anschlüsse
The C5 monitors offer various input options:
- Symmetrische Eingänge: Use the 1/4-inch TRS or XLR inputs for professional audio interfaces and mixers. These connections minimize noise interference.
- Unsymmetrische Eingänge: Use the RCA input for consumer-grade audio equipment.
Connect the power cord to the AC input on the rear panel and then to a suitable power outlet.
5.3 Acoustic Tuning
The rear panel features controls to adjust the monitor's frequency response to your room acoustics:
- Volumen: Stellt den Gesamtausgangspegel ein.
- Mitte: Passt die mittleren Frequenzen an.
- Hoch: Adjusts the high-range frequencies.
- Untere Grenzfrequenz: Filters out low frequencies, useful when paired with a subwoofer.
- Akustischer Raum: Compensates for bass buildup when monitors are placed near walls or corners.
6. Bedienungsanleitung
- Stellen Sie sicher, dass alle Audioverbindungen fest sitzen, bevor Sie das Gerät einschalten.
- Turn the volume knob on the rear panel to its minimum setting.
- Flip the power switch to the 'On' position.
- Erhöhen Sie die Lautstärke schrittweise auf die gewünschte Hörlautstärke.
- When finished, turn the volume down before powering off the monitors.
7. Wartung
- Reinigung: Use a soft, dry cloth to clean the exterior of the monitors. Avoid abrasive cleaners or solvents.
- Staub: Regularly dust the drivers and vents to prevent accumulation.
- Umfeld: Keep the monitors in a dry environment, away from extreme temperatures and direct sunlight.
8. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Kein Ton | Power off, incorrect input, volume too low. | Check power connection, select correct input, increase volume. |
| Verzerrter Klang | Input signal too high, faulty cable. | Reduce input level, try a different cable. |
| Brummen oder Summen | Ground loop, unshielded cables. | Use balanced cables, check grounding, try different power outlets. |
9. Spezifikationen
| Besonderheit | Spezifikation |
|---|---|
| Lautsprechertyp | 2-Way Active Studio Monitor |
| Woofer-Durchmesser | 5 Zoll |
| Hochtönerdurchmesser | 1 Zoll |
| AmpStrahlerleistung | 2 x 20 Watts (40W total) |
| Frequenzgang | 54 Hz - 22 kHz |
| Übergangsfrequenz | 4.5 kHz |
| Signal-Rausch-Verhältnis | > 90 dB (A-bewertet) |
| Eingangsimpedanz | 20 k ohms balanced, 10 k ohms unbalanced |
| Eingangslautstärketage | Fixed 110V ~50/60 Hz or 220V~50/60 Hz |
| Konnektivitätstechnologie | RCA, TRS |
| Artikelgewicht | 10 Pfund |
10. Garantie und Support
The Fluid Audio C5 Studio Monitor comes with a 2 Jahr eingeschränkte Garantie. For warranty claims or technical support, please refer to the contact information provided with your purchase documentation or visit the official Fluid Audio webWebsite.





