1. Produktüberschreitungview
The GROHE 34562000 Grohtherm 800 is a thermostatic wall-mounted shower mixer designed to provide a consistent and safe showering experience. It incorporates advanced technologies to ensure precise temperature control and water efficiency.
Hauptmerkmale:
- GROHE TurboStat Technology: Delivers the desired water temperature reliably within a fraction of a second and maintains it consistently.
- SafeStop: A preset temperature limit of 38°C to protect against scalding. Higher temperatures can be selected by deactivating the SafeStop button.
- GROHE EcoJoy with EcoButton: Allows reduction of water consumption by up to 50% at the push of a button, contributing to environmental conservation.
- GROHE StarLight Chrom-Finish: A durable, glossy chrome coating that is easy to clean and maintains its shine.
- Ergonomische Griffe: Entwickelt für komfortable und einfache Bedienung.
- WRAS-Zulassung: Certified for water regulatory advisory scheme compliance.
2. Sicherheitshinweise
Bitte lesen Sie vor der Installation und Verwendung alle Anweisungen sorgfältig durch. Die Nichtbeachtung dieser Anweisungen kann zu Verletzungen oder Schäden am Produkt führen.
- Installation should be performed by a qualified professional plumber in accordance with local plumbing and building codes.
- Vor Beginn jeglicher Installations- oder Wartungsarbeiten muss unbedingt die Hauptwasserzufuhr abgestellt werden.
- Tragen Sie während der Installation geeignete persönliche Schutzausrüstung, wie z. B. Schutzbrille und Handschuhe.
- Do not modify the product in any way. Use only genuine GROHE replacement parts.
- Keep children away from the installation area and do not allow them to operate the mixer unsupervised.
- Prüfen Sie nach der Installation und vor der regulären Inbetriebnahme alle Verbindungen auf Undichtigkeiten.
3. Packungsinhalt
Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden und unbeschädigt sind.
- GROHE Grohtherm 800 Thermostatic Wall Mounted Shower Mixer
- Fittings and mounting hardware
- Montageanleitung (dieses Dokument)
4. Installation
Professional installation is highly recommended to ensure proper function and compliance with all local regulations. This section provides general guidance.
4.1. Prüfungen vor der Installation
- Ensure the water supply lines (hot and cold) are correctly positioned and flushed.
- Verify that the wall surface is suitable for mounting and can support the weight of the mixer.
- Confirm the center distance between the hot and cold water inlets matches the mixer's requirements (typically 150mm ± 15mm).
4.2. Mounting the Mixer
Refer to the technical drawing below for critical dimensions and connection points.
Image: Technical drawing illustrating the dimensions and connection points for the GROHE Grohtherm 800 shower mixer. Key dimensions include G 1/2 connections, a diameter of 70mm, a depth of 73mm from the wall, a center distance of 150mm (with a tolerance of +/- 15mm), and a total height of 305mm.
- Install the S-unions (eccentric connectors) into the wall outlets, ensuring they are level and the correct distance apart (150mm center-to-center).
- Apply thread sealant to the S-unions and screw them into the wall connections.
- Attach the cover escutcheons to the S-unions.
- Mount the shower mixer onto the S-unions, ensuring the hot water inlet (usually left) and cold water inlet (usually right) are correctly aligned.
- Tighten the nuts securely, but do not overtighten.
- Open the main water supply and check for any leaks at the connections.
4.3. Erscheinungsbild nach der Installation
Image: The GROHE Grohtherm 800 Thermostatic Wall Mounted Shower Mixer shown installed on a wall in a modern shower environment, demonstrating its sleek chrome finish and compact design.
5. Bedienung
The Grohtherm 800 mixer is designed for intuitive and safe operation.
5.1. Temperaturregelung
- The temperature is controlled by the right-hand handle. Rotate the handle to adjust the water temperature.
- The mixer features GROHE TurboStat technology, which quickly reaches and maintains your desired temperature, even with fluctuations in water pressure.
- SafeStop: For safety, the temperature is limited to 38°C. To exceed this temperature, press the SafeStop button located on the temperature handle and then rotate the handle further.
5.2. Wasserdurchflussregelung
- The water flow is controlled by the left-hand handle. Rotate the handle to increase or decrease the water volume.
- EcoButton: To conserve water, press the EcoButton on the flow handle. This reduces the water flow by up to 50% without compromising the showering experience. To achieve full flow, press the EcoButton and rotate the handle further.
6. Pflege und Wartung
Proper care will ensure the longevity and appearance of your GROHE shower mixer.
6.1. Reinigung
- Clean the mixer with a soft cloth and mild soap or a non-abrasive liquid cleaner specifically designed for chrome finishes.
- Nicht use abrasive cleaners, scouring pads, or cleaners containing alcohol, ammonia, or phosphoric acid, as these can damage the chrome finish.
- Nach der Reinigung gründlich mit klarem Wasser abspülen und mit einem weichen Tuch trocknen, um Wasserflecken zu vermeiden.
6.2. Long-Term Care
- Regularly check for any signs of leaks or drips. Address these promptly to prevent water damage.
- If the water flow becomes restricted, check the aerator or shower head for limescale buildup and clean as necessary.
7. Anleitung zur Fehlerbehebung
This section addresses common issues you might encounter with your shower mixer.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Kein Warmwasser oder ungleichmäßige Temperatur | Hot water supply issue, thermostatic cartridge malfunction, or SafeStop engaged. | Check hot water supply. Ensure SafeStop is disengaged if higher temperatures are desired. If problem persists, contact a qualified plumber to inspect the thermostatic cartridge. |
| Niedriger Wasserdurchfluss | Limescale buildup in shower head/aerator, partially closed stopcock, or EcoButton engaged. | Clean shower head/aerator. Ensure stopcocks are fully open. Disengage EcoButton for full flow. Check water pressure in the building. |
| Water dripping from mixer | Worn seals or faulty cartridge. | Contact a qualified plumber to replace seals or the cartridge. |
| Mixer is loose on the wall | Die Befestigungsmuttern sind locker. | Carefully tighten the mounting nuts. Do not overtighten. |
For issues not listed here or if solutions do not resolve the problem, please contact a qualified plumber or GROHE customer support.
8. Technische Daten
| Spezifikation | Detail |
|---|---|
| Modellnummer | 34562000 |
| Marke | GROHE |
| Material | Messing |
| Ausführung | Verchromt |
| Farbe | Verchromt |
| Montagetyp | Wandhalterung |
| Anzahl der Griffe | 2 (one for temperature, one for flow) |
| Artikelgewicht | 1 Kilogramm |
| Anschlüsse | G 1/2 (standard) |
| Mittelpunktabstand | 150 mm (± 15 mm) |
9. Garantie und Kundendienst
9.1. Garantieinformationen
Dieses GROHE-Produkt wird mit einem 5 Jahr Herstellergarantie. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use and service.
For full terms and conditions of the warranty, please refer to the official GROHE warranty documentation or visit the GROHE webWebsite.
9.2. Kundendienst
If you require technical assistance, have questions about installation, or need to make a warranty claim, please contact GROHE customer support through their official webWebsite oder die Kontaktinformationen, die Sie mit Ihren Kaufunterlagen erhalten haben.
Always provide the model number (34562000) and a detailed description of the issue when contacting support.