Timex T129B

Timex T129B RediSet Digital Alarm Clock with USB Charging Station User Manual

Model: T129B | Brand: Timex

Einführung

The Timex T129B RediSet Digital Alarm Clock is designed for convenience and reliability, offering dual alarms, a programmable snooze, nap timers, and integrated USB charging ports. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.

Produkteigenschaften

  • Doppelalarme: Set two independent alarms for different schedules (e.g., weekdays and weekends).
  • RediSet Clock: Automatic time setting upon power connection and time zone selection.
  • USB-Ladestation: Features two USB ports (5W for phones, 10W for tablets/quick-charge phones) to charge devices simultaneously.
  • Programmierbare Schlummerfunktion: Einstellbare Schlummerdauer von 1 bis 29 Minuten.
  • Nap Timers: Convenient feature for short naps.
  • Lautstärkeschalter: Select between soft or loud alarm volume.
  • Batterie-Backup: Maintains time and alarm settings during temporary power interruptions (requires 3 AAA batteries, not included).
  • Display-Dimmer: Adjustable LED display brightness.

Aufstellen

  1. Stromanschluss: Connect the alarm clock to a 100V-240V universal AC adapter. The RediSet feature will automatically display the correct time.
  2. Auswahl der Zeitzone: If you are not in the Eastern Time Zone, use the "Time Zone" button (located on the back or top of the unit) to cycle through the available time zones until the correct time is displayed.
  3. Sommerzeit (DST): Locate the "DST" switch (usually on the back). Slide it to "+1" to add one hour for Daylight Saving Time, and to "-1" when DST ends.
  4. Installation einer Batterie-Notstromversorgung: For battery backup, open the battery compartment (typically on the bottom or back) and insert 3 AAA batteries (not included). Ensure correct polarity. This will preserve time and alarm settings during power outages.
Timex T129B RediSet Digital Alarm Clock with USB Charging Station

Bild: Vorderseite view of the Timex T129B alarm clock, showing the digital time display and two front-facing USB charging ports.

Timex T129B RediSet Digital Alarm Clock with USB Charging Station with labels for features

Image: Diagram of the Timex T129B alarm clock highlighting features like dual alarm indicators, 0.9" LED display, 3-level dimmer, low battery indicator, 5W USB port for smartphones, 10W USB port for tablets/quick-charge, programmable snooze, nap timers, Daylight Saving Time switch, and loud/soft alarm selector.

Bedienungsanleitung

Einstellen der Uhrzeit

  1. Halten Sie die ZEITEINSTELLUNG button (usually on the top panel) until the time display flashes.
  2. Verwenden Sie die + or - Tasten zum Einstellen der Stunde. Beachten Sie die PM-Anzeige.
  3. Drücken ZEITEINSTELLUNG Um zur Feinjustierung überzugehen, verwenden Sie + or - Minuten einstellen.
  4. Drücken ZEITEINSTELLUNG Zum Schluss noch einmal bestätigen und den Zeiteinstellungsmodus verlassen.

Alarme einstellen (Alarm 1 und Alarm 2)

Die Uhr verfügt über zwei unabhängige Wecker. Der Vorgang ist für beide identisch.

  1. Halten Sie die ALARM 1 or ALARM 2 Drücken Sie die Taste so lange, bis die Alarmzeit blinkt.
  2. Verwenden Sie die + or - Tasten zum Einstellen der Weckzeit. Beachten Sie die PM-Anzeige.
  3. Drücken Sie die jeweilige Taste ALARM Drücken Sie erneut die Taste, um zur Feineinstellung zu gelangen. + or - Minuten einstellen.
  4. Drücken Sie die ALARM button one more time to confirm and activate the alarm. An indicator light (ALM 1 or ALM 2) will illuminate on the display.
  5. Um einen aktiven Alarm auszuschalten, drücken Sie die entsprechende Taste. ALARM button once. The alarm indicator will turn off.

Schlummerfunktion

Wenn ein Alarm ertönt, drücken Sie die große Taste. SNOOZE / DISPLAY DIMMER bar to temporarily silence the alarm. The alarm will sound again after the preset snooze duration.

  • Programmierbare Schlummerfunktion: To adjust the snooze duration (1-29 minutes), refer to the detailed instructions in the full owner's manual.

Nickerchen-Timer

The nap timer allows for a short, temporary alarm without affecting your main alarm settings.

  1. Drücken Sie die NICKERCHEN Durch Drücken dieser Taste wird die voreingestellte Nickerchenzeit angezeigt (z. B. 5 Minuten).
  2. Verwenden Sie die + or - buttons to adjust the nap duration.
  3. The nap timer will start automatically after a few seconds or by pressing NICKERCHEN wieder.
  4. To cancel the nap timer, press ALM RESET.

Display-Dimmer

Passen Sie die Helligkeit des LED-Displays Ihren Vorlieben an.

  • Drücken Sie die SNOOZE / DISPLAY DIMMER bar (when no alarm is sounding) to cycle through different brightness levels.

Aufladen über USB

The clock provides two USB ports for charging your electronic devices.

  • Der beschriftete Port TELEFONE (5W) is suitable for charging smartphones.
  • Der beschriftete Port PHONES/TABLETS (10W) offers faster charging for tablets and quick-charge compatible smartphones.
  • Simply connect your device's USB charging cable to the appropriate port on the front of the alarm clock.

Video: An official product video from SDI Technologies, Inc. demonstrating the Timex Alarm Clock with USB Charging Station, RediSet Digital features, including dual USB ports for charging devices and automatic time setting.

Wartung

  • Reinigung: Reinigen Sie die Uhr mit einem weichen, trockenen Tuch. Verwenden Sie keine Scheuermittel oder Lösungsmittel.
  • Batteriewechsel: When the "BATT LOW" indicator appears, replace the 3 AAA backup batteries. Use a paper clip to open the battery compartment, replace the batteries, and ensure the compartment is securely closed.
  • Netzkabel: Stellen Sie sicher, dass das Netzkabel nicht eingeklemmt oder beschädigt ist.

Fehlerbehebung

ProblemLösung
Die Uhranzeige ist leer.Ensure the AC adapter is securely plugged into a working power outlet. Check if there was a power outage. If using battery backup, ensure batteries are fresh and correctly installed.
Der Alarm ertönt nicht.Verify that the alarm (ALM 1 or ALM 2) is activated (indicator light on). Check the alarm volume setting (LOUD/SOFT switch). Ensure the alarm time is set correctly (AM/PM).
Das Laden über USB funktioniert nicht.Ensure the clock is powered on. Check the USB cable for damage and ensure it's properly connected to both the clock and your device. Try a different USB port or device to isolate the issue.
Time is incorrect after power connection.Use the "Time Zone" button to select your correct time zone. Adjust the "DST" switch if Daylight Saving Time is active.

Technische Daten

  • Modell: T129B
  • Marke: Timex
  • Anzeigetyp: Digitale LED
  • Energiequelle: AC Adapter (100V-240V), 3 AAA batteries for backup (not included)
  • USB-Anschlüsse: 1x 5W (for phones), 1x 10W (for tablets/quick-charge phones)
  • Produktabmessungen: 6.42 Zoll B x 3.03 Zoll H
  • Artikelgewicht: 8.8 Unzen
  • Material: Plastik
  • Hersteller: SDI Technologies, Inc.

Garantie und Support

For warranty information and technical support, please refer to the complete owner's manual included with your product or visit the official Timex webWebsite. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

Enthaltene Komponenten: Bedienungsanleitung

© 2023 Timex. Alle Rechte vorbehalten.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.