Spigen Tough Armor Case for iPhone 6S / iPhone 6

Einführung

The Spigen Tough Armor case is engineered to provide robust protection for your Apple iPhone 6S and iPhone 6. This case features a two-part construction, combining a shock-absorbing TPU inner layer with a durable hard polycarbonate outer shell. It is designed to offer MIL-STD 810G 516.6 certified protection, utilizing Air Cushion Technology to safeguard your device against drops and impacts.

The design incorporates defined buttons for tactile feedback and a raised lip to protect both the screen and camera when the phone is placed on flat surfaces. Large, precise cutouts ensure compatibility with most charging cables and headphone jacks.

Setup und Installation

Follow these steps to properly install your Spigen Tough Armor case on your iPhone 6S or iPhone 6:

1. Trennen Sie die Gehäusekomponenten: Gently detach the hard polycarbonate outer shell from the flexible TPU inner layer. The case is designed to come apart for easier installation.



2. Insert Phone into TPU Layer: Carefully place your iPhone 6S or iPhone 6 into the flexible TPU inner layer. Ensure that all edges and corners of your phone are fully seated within the TPU layer and that the cutouts align with your phone's ports and buttons.
3. Attach Polycarbonate Shell: Align the hard polycarbonate outer shell with the TPU layer. Starting from one side, snap the outer shell securely into place around the phone, applying gentle, even pressure until it clicks into position.



4. Installation überprüfen: Check that all buttons (power, volume) are functional and responsive. Ensure that the charging port, headphone jack, and speaker grilles are unobstructed and accessible through the case's precise cutouts.

Betrieb und Nutzung

The Spigen Tough Armor case is designed for seamless daily use while providing maximum protection.

• Tastenfunktion: The case features defined buttons that maintain the tactile feel and responsiveness of your iPhone's original buttons. Press them as you normally would for power and volume control.



• Hafenzugänglichkeit: Large cutouts are provided for the charging port, headphone jack, and speakers, ensuring compatibility with most standard cables and accessories without needing to remove the case.



• Bildschirm- und Kameraschutz: The case features a raised lip around the screen and camera cutout. This design elevates your phone's display and camera lens off flat surfaces, providing additional protection against scratches and direct impacts.

Wartung

To ensure the longevity and appearance of your Spigen Tough Armor case, follow these simple maintenance guidelines:

• Reinigung: Remove the case from your iPhone. Use a soft, damp cloth with a small amount of mild soap and water to gently wipe down the case.
• Vermeiden Sie aggressive Chemikalien: Verwenden Sie keine Scheuermittel, Lösungsmittel oder aggressive Chemikalien, da diese das Material und die Oberfläche des Gehäuses beschädigen können.
• Trocknen: Lassen Sie die Hülle vollständig an der Luft trocknen, bevor Sie sie wieder an Ihrem Telefon anbringen.
• Regelmäßige Inspektion: Periodically inspect the case for any signs of wear or damage. While highly durable, extreme impacts can compromise its protective integrity.

Fehlerbehebung

If you encounter any issues with your Spigen Tough Armor case, consider the following common solutions:

• Schwierigkeiten bei der Installation/Demontage: If the case is difficult to install or remove, ensure you are separating the two components (TPU and polycarbonate) first. Apply gentle, even pressure rather than forcing it.
• Buttons Stiff/Unresponsive: Verify that your iPhone is correctly seated within the TPU inner layer and that the polycarbonate outer shell is perfectly aligned. A slight misalignment can affect button responsiveness.
• Zubehör passt nicht: While the case features large cutouts, some oversized third-party charging cables or headphone jacks may not fit. Ensure your accessories are of standard dimensions.
• Case Appears Damaged After Drop: If your phone has experienced a significant drop, inspect both the phone and the case thoroughly. Even if the phone appears undamaged, the case's protective structure might be compromised. Consider replacing the case for optimal continued protection.

Technische Daten

Garantie und Support

For detailed warranty information regarding your Spigen Tough Armor case, please refer to the official Spigen website or the documentation included with your purchase. Spigen products typically come with a manufacturer's warranty covering defects in materials and workmanship.

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact Spigen customer service directly. It is recommended to keep your purchase receipt or proof of purchase as it may be required for warranty services.

You can usually find contact information and support resources on the official Spigen webWebsite: www.spigen.com