Einführung
This manual provides detailed instructions for the proper use and maintenance of your Fujitsu General Air Conditioner Remote Control, model AR-RCC2J. Please read this manual thoroughly before using the remote control to ensure optimal performance and longevity.
Aufstellen
Einlegen der Batterie
The remote control requires two AAA (UM-4) alkaline batteries. Ensure correct polarity when inserting the batteries.
- Slide the battery cover on the back of the remote control downwards to open.
- Insert two new AAA alkaline batteries, matching the (+) and (-) terminals as indicated inside the battery compartment.
- Close the battery cover by sliding it back into place until it clicks.
Wichtig: Do not mix old and new batteries, or different types of batteries. Remove batteries if the remote control will not be used for an extended period to prevent leakage.

Abbildung 1: Rückseite der Fernbedienung mit Batteriefach.
Bedienungsanleitung
Familiarize yourself with the buttons on your remote control. The following section describes the function of each button.

Abbildung 2: Vorderseite view der Fernbedienung.
| Schaltflächenname | Funktion |
|---|---|
| 運転/停止 (Betrieb/Stopp) | Schaltet die Klimaanlage ein oder aus. |
| 運転切換 (Betriebsmodus) | Cycles through operation modes: Auto, Cooling, Dehumidify, Fan, Heating. |
| 温度 (Temperatur) ▲/▼ | Stellt die gewünschte Temperatur ein. |
| 風量切換 (Fan Speed) | Adjusts the fan speed: Auto, Strong, Weak, Gentle, Silent. |
| 風向 (Luftrichtung) | Passt die horizontale Luftstromrichtung an. |
| スイング (Swing) | Activates or deactivates the automatic vertical airflow swing. |
| ハイパワー (High Power) | Aktiviert einen leistungsstarken Betriebsmodus zum schnellen Kühlen oder Heizen. |
| 電流カット (Current Cut) | Engages an energy-saving mode by limiting current consumption. |
| 信号切換 (Signal Switch) | Used for switching signals, potentially for controlling multiple units or specific functions. |
| プラズマイオン (Plasma Ion) | Activates the Plasma Ion function for air purification. |
| 内部クリーン (Innere Reinigung) | Initiates an internal cleaning cycle for the air conditioner unit. |
| タイマー (Timer) | Sets or cancels the ON/OFF timer. |
| 切換 (Switch) | Used for navigating or confirming timer settings. |
| 時間変更 (Time Change) | Passt die Zeit für die Timer-Einstellungen an. |
| リセット (Reset) | Resets the remote control settings. Typically a recessed button requiring a pointed object. |
Wartung
Reinigen der Fernbedienung
Reinigen Sie die Fernbedienung mit einem weichen, trockenen Tuch. Verwenden Sie keine flüssigen Reinigungsmittel oder Scheuermittel, da diese die Oberfläche oder die internen Bauteile beschädigen können.
Batteriewechsel
Replace batteries when the display becomes dim or the remote control becomes unresponsive. Refer to the 'Battery Installation' section for detailed instructions.
Fehlerbehebung
- Fernbedienung reagiert nicht:
Check if the batteries are inserted correctly with the correct polarity. Replace with new batteries if they are old or depleted. Ensure there are no obstructions between the remote control and the air conditioner unit's receiver. - Bildschirm ist dunkel oder leer:
This indicates low battery power. Replace both batteries with new AAA alkaline batteries. After replacing batteries, press the 'Reset' button (if available and accessible) to restore full functionality. - Air Conditioner Not Responding to Commands:
Ensure the remote control is pointed directly at the air conditioner unit. Verify that the air conditioner unit is powered on. If the issue persists, try resetting the remote control by removing and reinserting the batteries, then pressing the 'Reset' button.
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | AR-RCC2J |
| Farbe | Weiß |
| Stromquelle | 2 x AAA-Alkaline-Batterien (nicht im Lieferumfang enthalten) |
| Abmessungen (ca.) | 16.8 x 9 x 3.3 cm |
| Gewicht ca.) | 98 g |
| UPC | 601209819167 |
Garantie und Support
For warranty information or technical support, please refer to the documentation provided with your Fujitsu General air conditioner unit or contact Fujitsu General customer service directly. This remote control is designed as a genuine replacement part.