Utilitech White Touch Lamp Kontrolle

1. Produktüberschreitungview

The Utilitech Plug-in Touch Control Dimmer is designed to convert any lamp mit einer Metallfassung in ein berührungsgesteuertes lamp. This device provides three distinct levels of illumination, allowing users to easily adjust lighting from a subtle night light to full brightness. Operation is simplified by merely touching the lamp's metal surface to cycle through light settings or to turn the lamp on and off. It is compatible with incandescent bulbs up to 200 watts and is engineered for straightforward installation.

Utilitech White Touch Lamp Control unit, a small white rectangular device with a two-prong plug on one side and an outlet on the other.

Image 1.1: The Utilitech Plug-in Touch Control Dimmer. This compact white unit plugs directly into a wall outlet and features a receptacle for the lampNetzkabel.

2. Sicherheitshinweise

Stellen Sie sicher, dass die lamp control is used with incandescent bulbs only, up to a maximum of 200 watts. Do not exceed the specified wattage.
This device is intended for indoor use only. Do not expose to moisture or extreme temperatures.
Trennen Sie immer den lamp from the control unit and the control unit from the wall outlet before performing any maintenance or changing bulbs.
Versuchen Sie nicht, das Gerät zu zerlegen oder zu verändern. Überlassen Sie alle Wartungsarbeiten qualifiziertem Fachpersonal.
Außerhalb der Reichweite von Kindern aufbewahren.
Stellen Sie sicher, dass die lamp you intend to convert has a metal socket for proper touch functionality.

3. Packungsinhalt

1 x Utilitech White Touch Lamp Steuereinheit

4. Einrichtung und Installation

Bereiten Sie das L voramp: Stellen Sie sicher, dass Ihr lamp has a metal socket. Unplug the lamp von seiner Stromquelle.
Schließen Sie die Steuereinheit an: Plug the Utilitech Touch Lamp Control unit into a standard 120V AC wall outlet.
Verbinden Sie das Lamp: Steck dein lamp's power cord into the receptacle on the Utilitech Touch Lamp Steuergerät.
Überprüfen Sie den Lampentyp: Bestätigen Sie, dass die lamp contains an incandescent bulb, not exceeding 200 watts. LED or CFL bulbs may not function correctly or may cause damage.
Erster Test: Once connected, touch any metal part of the lamp's base or body. The lamp should turn on to its lowest setting.

Wichtiger Hinweis: For optimal performance, ensure the lamp's metal components are clean and free of non-conductive coatings or paint where touch contact is intended.

5. Bedienungsanleitung

The Utilitech Touch Lamp Control provides three levels of brightness and an off state, cycled by touching the lamp's metal surface.

To Turn On (Low Brightness): Touch any metal part of the lamp. Die lamp will illuminate at its lowest brightness setting (night light).
To Increase Brightness (Medium): Berühren Sie das lamp again. The brightness will increase to a medium level.
To Increase Brightness (High): Berühren Sie das lamp a third time. The brightness will increase to its highest level (full brightness).
Ausschalten: Berühren Sie das lamp zum vierten Mal.amp wird ausgeschaltet.

The cycle repeats with each subsequent touch: Off → Low → Medium → High → Off.

6. Wartung

Reinigung: Disconnect the unit from the power outlet before cleaning. Wipe the control unit with a dry, soft cloth. Do not use abrasive cleaners or solvents.
Lampenwechsel: Trennen Sie immer den lamp from the control unit and the control unit from the wall outlet before replacing a light bulb. Ensure the replacement bulb is an incandescent type and does not exceed 200 watts.
Lagerung: If storing the unit for an extended period, unplug it from the wall outlet and store it in a cool, dry place.

7. Fehlerbehebung

Problem	Mögliche Ursache	Lösung
Lamp does not turn on or respond to touch.	Gerät nicht eingesteckt. Lamp not plugged into unit. Lamp bulb is burnt out or incorrect type. Lamp does not have a metal socket or is coated. Defektes Gerät.	Ensure unit is securely plugged into a live outlet. Stellen Sie sicher, dass lamp is securely plugged into the control unit. Replace bulb with a new incandescent bulb (max 200W). Bestätigen lamp has an exposed metal socket. Test with another lamp or outlet. If issue persists, unit may be faulty.
Lamp flackert oder verdunkelt sich unregelmäßig.	Incompatible bulb type (e.g., LED, CFL). Wackelkontakt.	Ensure only incandescent bulbs are used. Überprüfen Sie, ob alle Verbindungen sicher sind.
Lamp stays on or off.	Interner Fehler.	Unplug the unit for 30 seconds and plug back in to reset. If issue persists, unit may be faulty.

8. Spezifikationen

Besonderheit	Detail
Marke	Utilitech
Modellnummer	25991
Farbe	Weiß
Kontrollmethode	Berühren
Kompatibilität des Lichtquellentyps	Glühlampe
Maximale Wattage	200 Watt
Bandtage	120 Volt
Besonderheit	Dimmable (3 levels)
Verwendung im Innen- und Außenbereich	Innenbereich
Montagetyp	Steckhalterung
Artikelgewicht	2.78 Unzen
Verpackungsabmessungen	8.66 x 4.92 x 2.6 Zoll

9. Garantie und Support

For warranty information or technical support, please refer to the product packaging or contact Utilitech customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, please visit the official Utilitech website or contact their customer support line. Contact details are typically provided on the product packaging or within the original sales documentation.

Utilitech