NVX VUBT2 Universal Waterproof Bluetooth Audio Receiver Instruction Manual

1. Produktüberschreitungview

The NVX VUBT2 is a universal waterproof Bluetooth 4.0 audio receiver designed to add wireless audio streaming capabilities to various vehicles and vessels, including marine, boats, cars, and ATVs. It features a robust, water-resistant design and provides high-quality stereo audio output.

Hauptmerkmale:

• Bluetooth Profile: A2DP (hochwertiges Stereo-Audio)
• Bluetooth Core Specification: Version 4.0 with aptX
• Ausgaben: One Stereo Pair, Low-Level RCA Plugs
• Ausgangsvolumentage: 2V RMS
• Signal-Rausch-Verhältnis: 93 dB (20 Hz - 20 kHz)
• Wasserbeständigkeit: IPX67 rated for protection against dust and water immersion.
• Konnektivität: 3.5-mm-Audioeingang/-ausgang.
• Ferneinschaltung: Amplifier remote turn-on feature.

2. Sicherheitshinweise

Bitte lesen Sie vor der Installation und Inbetriebnahme alle Anweisungen sorgfältig durch. Die Nichtbeachtung dieser Anweisungen kann zu Produktschäden, Sachschäden oder Personenschäden führen.

• Ensure the vehicle's power is disconnected before installation to prevent electrical shorts.
• Use appropriate wiring gauges and fuses as recommended.
• Mount the device securely to prevent movement during operation.
• Setzen Sie das Gerät keinen extremen Temperaturen oder direkter Flamme aus.
• While the device is waterproof (IPX67), ensure all connections are properly sealed and protected from direct water exposure to maintain integrity.

3. Packungsinhalt

Überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:

• NVX VUBT2 Bluetooth Audio Receiver
• Power/Ground/Remote Wiring Harness with In-line Fuse
• 3.5 mm zu Cinch-Audiokabel
• Mounting Hardware (screws or adhesive pads)

Image: The NVX VUBT2 Bluetooth Audio Receiver shown with its power/ground/remote wiring harness, in-line fuse, and 3.5mm to RCA audio cable.

4. Einrichtung und Installation

4.1 Kabelverbindungen

The VUBT2 requires power, ground, and a remote turn-on connection. It outputs audio via RCA connections.

1. Strom (rotes Kabel): Connect the red wire to a switched 12V power source. This can be the accessory wire from your vehicle's ignition or a dedicated switch. The in-line fuse should be installed close to the power source.
2. Erdung (schwarzer Draht): Connect the black wire to a solid chassis ground point. Ensure a clean, secure connection for optimal performance.
3. Ferneinschaltung (blaues Kabel): Connect the blue wire to the remote turn-on input of your amplifier or other audio components. This will power on the VUBT2 when your system is activated.
4. Audio Output (3.5mm to RCA): Connect the 3.5mm jack from the VUBT2 to the included 3.5mm to RCA cable. Then, connect the RCA plugs (red for right, white for left) to the audio input of your amplifier oder Headunit.

Image: The NVX VUBT2 Bluetooth receiver wired to an amplifier, demonstrating the remote turn-on and RCA audio connections.

Image: Close-up of the 3.5mm audio output connected to RCA cables, ready for connection to an audio system.

4.2 Montage

The compact design of the VUBT2 allows for flexible mounting options. It can be mounted using screws through its integrated tabs or with adhesive pads (if included).

• Choose a location that is dry, secure, and allows for proper cable routing.
• Ensure the mounting surface is clean and flat if using adhesive.
• The device is IPX67 rated, making it suitable for exposed locations, but protecting connections is still recommended.

Image: The underside of the NVX VUBT2 unit, displaying the 3M adhesive backing for secure mounting in various applications.

5. Bedienungsanleitung

5.1 Bluetooth-Kopplung

1. Ensure the VUBT2 is powered on (your audio system is active).
2. Navigieren Sie auf Ihrem Mobilgerät (Smartphone, Tablet usw.) zu den Bluetooth-Einstellungen.
3. Scan for available Bluetooth devices. The VUBT2 will appear as "NVX VUBT2" or similar.
4. Select the VUBT2 to pair. A confirmation tone or LED indicator may signal a successful connection.
5. Once paired, your device will typically reconnect automatically when in range and the VUBT2 is powered on.

5.2 Audiowiedergabe

After successful pairing, you can stream audio from your mobile device to your connected audio system. Control playback (play/pause, skip tracks, volume) directly from your paired device.

Image: A smartphone screen displaying music controls, illustrating how users can manage audio playback through the NVX VUBT2.

6. Wartung

The NVX VUBT2 is designed for durability and minimal maintenance. Follow these guidelines to ensure longevity:

• Reinigung: Verwenden Sie ein weiches,amp Verwenden Sie ein Tuch, um die Außenseite des Geräts abzuwischen. Vermeiden Sie scharfe Chemikalien oder Scheuermittel.
• Wasserbeständigkeit: While IPX67 rated, avoid prolonged submersion or high-pressure water jets directly on the unit or its connections. Regularly inspect wiring and connections for any signs of wear or damage that could compromise water resistance.
• Verbindungen: Überprüfen Sie regelmäßig alle Kabelverbindungen, um sicherzustellen, dass sie sicher und korrosionsfrei sind.

Image: The NVX VUBT2 unit covered in water droplets, illustrating its IPX67 water-resistance rating for use in challenging environments.

7. Fehlerbehebung

8. Spezifikationen

9. Garantieinformationen

NVX products are designed and manufactured to the highest quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official NVX webBewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

10. Kundendienst

If you encounter any issues or have questions regarding your NVX VUBT2 Bluetooth Audio Receiver that are not covered in this manual, please contact NVX customer support for assistance.

• Online-Hilfe: Visit the official NVX webWebseite mit häufig gestellten Fragen, Support-Ressourcen und Kontaktinformationen.
• Verkäufersupport: For purchase-related inquiries, contact the seller directly.