Cree Lighting Connected LED Smart Bulb User Manual

Einführung

The Cree Connected LED bulb is designed to provide an easy-to-use and cost-effective solution for customizing lighting in your home. This smart bulb can be controlled from anywhere, offering convenience and flexibility. It integrates with compatible home automation systems, allowing you to manage your lighting settings via an app on your iOS or Android device.

The Cree Connected LED bulb offers convenient control from anywhere, enhancing your home lighting experience.

Sicherheitshinweise

Bitte lesen und verstehen Sie alle Sicherheitshinweise, bevor Sie dieses Produkt installieren oder verwenden. Die Nichtbeachtung dieser Hinweise kann zu Stromschlag, Brand oder anderen Gefahren führen.

• Nur zur Verwendung im Innenbereich: Diese Glühbirne ist für den Innenbereich in trockenen Räumen vorgesehen. Nicht in feuchten oder trockenen Umgebungen verwenden.amp Umgebungen.
• Nicht für geschlossene Installationen: Do not use this bulb in fully enclosed luminaires or fixtures, as this can trap heat and shorten the bulb's lifespan.
• Dimmbare LED: This bulb is dimmable, but it is not recommended for use with traditional wall dimmers. Control dimming via a compatible smart hub and app.
• Vor der Installation ausschalten: Always turn off the power to the fixture at the circuit breaker before installing or removing the bulb.
• Bandtage Kompatibilität: Stellen Sie sicher, dass die Lautstärke der Leuchtetage (120 Volts) matches the bulb's requirements.
• Vorsichtig handhaben: Avoid dropping the bulb or subjecting it to excessive force.

Packungsinhalt

The package for your Cree Connected LED Smart Bulb typically includes:

• 1 x Cree Connected LED Smart Bulb

The product packaging for the Cree Connected LED Smart Bulb.

Aufstellen

To set up your Cree Connected LED Smart Bulb, you will need a compatible ZigBee certified hub (e.g., Wink, SmartThings, WeMo, or Alexa devices with built-in ZigBee hub like Echo Plus, Echo Studio, Echo Show 2nd Gen).

1. Installieren Sie die Glühbirne: Screw the Cree Connected LED bulb into a standard E26 light socket. Ensure the power to the fixture is off before installation.
2. Prepare Your Hub: Place your compatible ZigBee hub into device discovery mode. Refer to your hub's specific instructions for this step. It is often recommended to initiate discovery mode on the hub vor turning on the bulb.
3. Power On the Bulb: Turn on the power to the light fixture. The bulb should light up. Your hub should detect and pair with the bulb automatically. A successful pairing is often indicated by the bulb blinking twice.
4. Download and Launch App: Download the applicable app for your chosen hub (e.g., Wink app, SmartThings app, Alexa app) on your iOS or Android device. Launch the app and follow the on-screen instructions to add and configure your new bulb.
5. Name Your Bulb: Once paired, you can name your bulb within the app for easy identification and control (e.g., "Living Room Lamp," "Kitchen Light").

Resetting the Bulb to Factory Defaults

If you experience difficulty pairing the bulb or need to reset it, follow this sequence:

• 1. Turn the bulb AUS für 2 Sekunden.
• 2. Turn the bulb ON für 1 Sekunde.
• 3. Turn the bulb AUS für 2 Sekunden.
• 4. Turn the bulb ON für 1 Sekunde.
• 5. Turn the bulb AUS für 2 Sekunden.
• 6. Turn the bulb ON für 1 Sekunde.
• 7. Turn the bulb AUS für 2 Sekunden.
• 8. Turn the bulb ON.

After the fourth ON cycle, the light will blink twice, indicating a successful reset. You can then attempt to pair the bulb again.

Cree Lighting offers a variety of smart lighting solutions.

Bedienungsanleitung

Once your Cree Connected LED Smart Bulb is successfully paired with your hub, you can control it using the associated mobile application or voice commands through compatible smart assistants.

• Ein/Aus-Steuerung: Use the app to turn the bulb on or off instantly.
• Dimmen: Adjust the brightness of the bulb to your desired level using the dimming controls within the app. The bulb offers a full range of dimming.
• Terminplanung: Set schedules for your lights to turn on or off automatically at specific times, or to simulate occupancy when you are away from home.
• Gruppierung: Group multiple Cree Connected bulbs together to control them simultaneously as a single unit.
• Sprachsteuerung: If connected to a voice assistant (e.g., Alexa), use voice commands to control your lights (e.g., "Alexa, turn on Living Room Light," "Alexa, dim Kitchen to 50%").

Control your smart bulbs easily through the mobile application.

Control your lights remotely for convenience and security.

Wartung

The Cree Connected LED Smart Bulb requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Reinigung: Stellen Sie sicher, dass die Glühbirne abgekühlt und der Strom ausgeschaltet ist, bevor Sie sie reinigen. Wischen Sie die Glühbirne mit einem weichen, trockenen Tuch ab. Verwenden Sie keine flüssigen oder scheuernden Reinigungsmittel.
• Lagerung: Wenn Sie die Glühbirne über einen längeren Zeitraum lagern möchten, bewahren Sie sie in ihrer Originalverpackung oder einem Schutzbehälter an einem kühlen, trockenen Ort auf.
• Überhitzung vermeiden: Do not install the bulb in enclosed fixtures or areas with poor ventilation, as this can lead to overheating and reduce its lifespan.

Fehlerbehebung

If you encounter issues with your Cree Connected LED Smart Bulb, refer to the following common problems and solutions:

Technische Daten

Dimensions of the Cree Connected LED Smart Bulb.

Garantie und Support

Garantie: The Cree Connected LED Smart Bulb comes with a 3-year limited warranty. Please refer to the product packaging for complete details regarding warranty coverage and terms.

Unterstützung: For additional support, frequently asked questions, or to access the latest user guides and installation manuals, please visit the official Cree Lighting website. You may also find helpful resources in the PDF documents provided by the manufacturer:

• Installationshandbuch (PDF)
• Benutzerhandbuch (PDF)
• Benutzerhandbuch (PDF)