Peakeep Digitalwecker MHP3112 Benutzerhandbuch

1. Einleitung

This manual provides detailed instructions for the Peakeep Digital Alarm Clock, Model MHP3112. This battery-operated digital alarm clock features a clear display, dual alarm settings with weekday mode options, an indoor temperature display, and a smart sensor night light for enhanced visibility in low-light conditions. Its compact and durable design makes it suitable for various indoor environments.

Abbildung 1: Vorderseite view of the Peakeep Digital Alarm Clock MHP3112, displaying current time, date, day of the week, indoor temperature, and active alarm settings.

2. Einrichtung

2.1 Einlegen der Batterie

The Peakeep Digital Alarm Clock requires 3 AAA batteries for operation. Batteries are not included and must be purchased separately.

1. Suchen Sie den Batteriefachdeckel auf der Rückseite der Uhr.
2. Schieben Sie den Deckel nach unten, um ihn zu öffnen.
3. Legen Sie 3 AAA-Batterien ein und achten Sie dabei auf die richtige Polarität (+ und -).
4. Setzen Sie die Abdeckung des Batteriefachs wieder ein, indem Sie sie nach oben schieben, bis sie einrastet.

Figure 2: Rear panel of the alarm clock, highlighting the battery compartment and various setting buttons and switches.

2.2 Erste Zeit- und Datumseinstellung

After installing batteries, the clock will power on. Follow these steps to set the current time and date:

1. Suchen Sie die ZEITEINSTELLUNG slider on the right side of the back panel. Slide it to the 'TIME SET' position.
2. Verwenden Sie die STUNDE button to adjust the hour. Press repeatedly or hold to advance quickly. Observe the AM/PM indicator.
3. Verwenden Sie die MIN/DATUM button to adjust the minute. Press repeatedly or hold to advance quickly.
4. To set the date, press the MIN/DATUM button while in 'TIME SET' mode. The year will flash. Use the STUNDE Knopf, um das Jahr einzustellen.
5. Drücken MIN/DATUM again to set the month. Use the STUNDE Mit der Taste können Sie den Monat anpassen.
6. Drücken MIN/DATUM again to set the day. Use the STUNDE Taste zum Einstellen des Tages.
7. Once all settings are correct, slide the ZEITEINSTELLUNG slider back to the 'LOCK' position to save.

2.3 Temperature Unit and Time Format

To switch between Celsius (°C) and Fahrenheit (°F) for temperature display, or between 12-hour and 24-hour time format:

• Drücken Sie die MIN/DATUM button to toggle between °C and °F.
• Drücken Sie die 12 / 24HR Taste zum Umschalten zwischen 12-Stunden- und 24-Stunden-Zeitformat.

Figure 3: The clock display showing the indoor temperature reading.

Figure 4: The clock display showing the month, date, and day of the week.

3. Bedienungsanleitung

3.1 Alarme einstellen (Alarm 1 & Alarm 2)

The clock supports two independent alarms. To set an alarm:

1. Suchen Sie die WECKER GESTELLT slider on the right side of the back panel. Slide it to the 'ALARM SET' position.
2. Verwenden Sie die STUNDE button to adjust the alarm hour. Press repeatedly or hold to advance quickly.
3. Verwenden Sie die MIN/DATUM button to adjust the alarm minute. Press repeatedly or hold to advance quickly.
4. To set the second alarm, press the ALARM button on the back panel. The alarm icon (1 or 2) will change. Repeat steps 2 and 3.
5. Once the alarm time(s) are set, slide the WECKER GESTELLT slider back to the 'LOCK' position.

Figure 5: The clock display indicating two alarm settings and the active weekday mode (MON-TO-FRI).

3.2 Activating/Deactivating Alarms and Weekday Mode

Verwenden Sie die ALARM EIN / AUS slider on the left side of the back panel to control alarm activation and mode:

• ON: Activates the alarm(s) for all 7 days.
• MON-TO-FRI: Activates the alarm(s) only on weekdays (Monday to Friday).
• MON-TO-SAT: Activates the alarm(s) from Monday to Saturday.
• AUS: Deactivates all alarms.

3.3 Schlummerfunktion

Wenn ein Alarm ertönt, drücken Sie die große Taste. SNOOZE / LICHT button on the top of the clock to activate the snooze function. The alarm will temporarily stop and sound again after approximately 9 minutes.

3.4 Smart Sensor Night Light

The clock features a smart sensor night light that automatically illuminates the display in low-light conditions. You can adjust its behavior:

• Verwenden Sie die NACHTLICHT switch on the back panel to select between 'OFF', 'LOW', or 'HIGH' brightness for the automatic night light.
• Durch Drücken der SNOOZE / LICHT button on top will temporarily illuminate the display for 5 seconds at full brightness, regardless of the night light switch setting.

Figure 6: The top snooze/light button and the illuminated display.

Figure 7: The clock's smart dim backlight feature in action, with the low brightness setting indicated.

4. Wartung

4.1 Batteriewechsel

Wenn die Anzeige dunkler wird oder die Uhrfunktionen unregelmäßig funktionieren, müssen die Batterien ausgetauscht werden. Befolgen Sie die Schritte zum Einlegen der Batterien in Abschnitt 2.1.

4.2 Reinigung

To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the display or casing.

5. Fehlerbehebung

• Kein Display/Gedimmtes Display: Check battery installation and replace with fresh AAA batteries. Ensure the night light switch is not set to 'OFF' if expecting continuous illumination.
• Alarm ertönt nicht: Überprüfen Sie die ALARM EIN / AUS slider is set to 'ON', 'MON-TO-FRI', or 'MON-TO-SAT' as desired. Ensure the alarm time is correctly set.
• Falsche Uhrzeit/falsches Datum: Re-enter time and date settings as described in Section 2.2. Ensure the ZEITEINSTELLUNG slider is returned to 'LOCK' after adjustments.

6. Spezifikationen

Figure 8: Dimensions of the Peakeep Digital Alarm Clock.

7. Garantie und Support

For warranty inquiries or product support, please contact Peakeep customer service at: sales@us-myhome.com.