HyperX Savage DDR4 Memory Module User Manual

Einführung

This manual provides essential information for the installation, operation, and maintenance of your HyperX Savage DDR4 memory modules. The HyperX Savage DDR4 memory is designed to complement Intel's 2, 4, 6, or 8 core processors, offering enhanced performance for tasks such as video editing, 3D rendering, gaming, and AI processing. These modules feature speeds up to 3000MHz and latencies of CL15, optimized for Intel's 100 series chipset and X99 chipset motherboards, supporting easy overclocking via XMP profiles.

Bild: Vorderseite view of the HyperX Savage DDR4 memory module, showcasing its black heat spreader with the HyperX logo and Savage DDR4 branding.

Packungsinhalt

Überprüfen Sie, ob Ihr Paket die folgenden Artikel enthält:

• 2 x HyperX Savage DDR4 Memory Modules (8GB each, 16GB Kit)

Setup und Installation

Before installing the memory modules, ensure your system is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

1. Vorbereitung

1. Kompatibilitätsprüfung: Confirm that your motherboard supports DDR4 DIMM memory modules and the specified speed (3000MHz). Refer to your motherboard's manual for details.
2. Ausschalten: Schalten Sie Ihren Computer vollständig aus und trennen Sie das Netzkabel.
3. Fall eröffnen: Open your computer's side panel to access the motherboard.

2. Modulinstallation

1. DIMM-Steckplätze finden: Identify the DDR4 DIMM slots on your motherboard. Consult your motherboard manual for the correct slot configuration for dual-channel memory.
2. Clips öffnen: Gently push down the retention clips at both ends of the DIMM slot.
3. Ausrichtungsmodul: Hold the memory module by its edges, avoiding contact with the gold pins. Align the notch on the module with the key in the DIMM slot.
4. Modul einfügen: Apply even pressure to both ends of the module until it seats firmly into the slot and the retention clips snap into place. Do not force the module.
5. Wiederholen: Install the second memory module into the corresponding slot as indicated by your motherboard manual.

Bild: Abgewinkelt view of the HyperX Savage DDR4 memory module, showing the heat spreader design and the gold contact pins.

3. Nach der Installation

1. Fall abschließen: Bringen Sie die Seitenwand Ihres Computergehäuses wieder an.
2. Stromversorgung wiederherstellen: Plug the power cable back into your computer and power it on.

Bedienungsanleitung

After physical installation, it is important to configure your system's BIOS/UEFI to utilize the full potential of your HyperX Savage DDR4 memory modules.

Enabling XMP Profile

HyperX Savage DDR4 memory modules come with built-in Intel XMP (Extreme Memory Profile) Profifiles. Diese Profiles are optimized for Intel 100 series chipsets and X99 motherboards, allowing for easy overclocking without manual timing adjustments.

1. Zugriff auf BIOS/UEFI: Drücken Sie während des Systemstarts wiederholt die angegebene Taste (üblicherweise DEL, F2, F10, oder F12) to enter your motherboard's BIOS or UEFI settings. The specific key varies by motherboard manufacturer.
2. XMP-Einstellungen finden: Navigate to the memory or overclocking section within the BIOS/UEFI. Look for an option related to 'XMP', 'DOCP', 'A-XMP', or 'Memory Profile'.
3. Enable Profile: Wählen Sie XMP Pro ausfile (usually 'Profile 1' or 'Enabled') to automatically configure the memory to its rated speed (3000MHz) and timings (CL15) at 1.35V.
4. Speichern und schließen: Speichern Sie die Änderungen und beenden Sie das BIOS/UEFI. Ihr System wird mit den neuen Speichereinstellungen neu gestartet.

If your system does not support XMP, the memory will operate at a default JEDEC speed, typically 2133MHz or 2400MHz, depending on your motherboard and CPU.

Wartung

HyperX Savage DDR4 memory modules are designed for durability and reliability. Minimal maintenance is required to ensure optimal performance and longevity.

• Sauber halten: Periodically clean the interior of your computer case to prevent dust buildup on the memory modules and other components. Use compressed air to gently remove dust.
• Richtige Handhabung: Beim Umgang mit Speichermodulen sollten diese immer an den Kanten angefasst werden, um eine Berührung der Goldkontakte oder der integrierten Schaltkreise zu vermeiden.
• Temperaturkontrolle: Ensure adequate airflow within your computer case to maintain optimal operating temperatures for all components, including memory.

Fehlerbehebung

If you encounter issues after installing your HyperX Savage DDR4 memory, consider the following troubleshooting steps:

• System startet nicht:
  • Ensure the memory modules are fully seated in their slots and the retention clips are locked.
  • Verify that your motherboard supports the installed memory type and speed.
  • Try booting with only one module installed to identify a potentially faulty module.
• Incorrect Speed Detected:
  • Access your BIOS/UEFI settings and ensure the XMP profile ist aktiviert.
  • Update your motherboard's BIOS/UEFI to the latest version, as this can improve memory compatibility and stability.
• Systeminstabilität oder Abstürze:
  • Führen Sie ein Speicherdiagnosetool (z. B. Windows Memory Diagnostic oder MemTest86) aus, um nach Fehlern zu suchen.
  • Stellen Sie sicher, dass Ihr Netzteil alle Komponenten mit ausreichend und stabiler Leistung versorgt.
  • Check for proper cooling within your system to prevent overheating.

Technische Daten

Garantie und Support

HyperX Savage DDR4 memory modules are backed by a lifetime warranty, ensuring long-term reliability and peace of mind. Free technical support is also available to assist with any questions or issues you may encounter.

For warranty claims or technical assistance, please visit the official HyperX support webBesuchen Sie die Website oder kontaktieren Sie den Kundenservice. Bewahren Sie Ihren Kaufbeleg zur Überprüfung der Garantie auf.

HyperX Support: www.hyperx.com/support