KICKER CompQ12 Q-Class 12-Inch Subwoofer Instruction Manual

1. Einleitung

This manual provides essential information for the proper installation, operation, and maintenance of your KICKER CompQ12 Q-Class 12-Inch (30cm) Dual Voice Coil (DVC) 2-Ohm Subwoofer. Please read these instructions thoroughly before attempting installation or use to ensure optimal performance and longevity of your product.

The KICKER CompQ12 subwoofer is engineered for high-caliber bass reproduction, featuring oversized voice coils for significant power handling and robust magnets for high sound pressure levels (SPL). Its design incorporates advanced technology for precise control and durability under demanding conditions.

2. Sicherheitshinweise

Beachten Sie immer die folgenden Sicherheitsvorkehrungen:

• Disconnect the vehicle's battery before installing any audio components to prevent electrical shorts.
• Stellen Sie sicher, dass alle Kabel ordnungsgemäß isoliert und befestigt sind, um Beschädigungen und Kurzschlüsse zu vermeiden.
• Avoid installing the subwoofer in locations where it may be exposed to moisture or excessive heat.
• Verwenden Sie für die Strom- und Lautsprecheranschlüsse Kabel mit geeignetem Querschnitt, um den Leistungsbedarf des Subwoofers zu decken.
• Längere Einwirkung hoher Schalldruckpegel kann zu dauerhaften Hörschäden führen. Seien Sie beim Einstellen der Lautstärke vorsichtig.

3. Lieferumfang

Upon unpacking, verify that the following item is included:

• One KICKER CompQ 12-inch Subwoofer (Model: 42CWQ122)

4. Installation

4.1 Montagehinweise

The KICKER CompQ12 subwoofer requires a suitable enclosure for optimal performance. Ensure the mounting location provides adequate space and structural integrity to support the subwoofer's weight and output.

• Einbautiefe: 7-1/8 Zoll (18.1 cm)
• Produktabmessungen (gesamt): Approximately 13.78"D x 13.78"W x 11.81"H (This refers to the overall package/product dimensions, not just the subwoofer itself. For mounting, the diameter and depth are key.)
• Lautsprechergröße: 12 Zoll
• Subwoofer-Durchmesser: 12.5 Zoll

Figure 1: Kicker CompQ12 Subwoofer with key dimensions for installation.

Ensure the enclosure provides sufficient internal volume and is constructed from sturdy materials to prevent resonance and air leaks.

4.2 Wiring the Dual Voice Coil (DVC) Subwoofer

The CompQ12 features a Dual Voice Coil (DVC) design with a 2-Ohm impedance per coil. This allows for flexible wiring configurations to match various amplifier loads. Always verify your ampStabiler Impedanzbereich des Verstärkers vor der Verdrahtung.

Common Wiring Configurations for a DVC 2-Ohm Subwoofer:

• 1-Ohm Load (Parallel Wiring): Verbinden Sie die Pluspole beider Schwingspulen miteinander und die Minuspole beider Schwingspulen ebenfalls miteinander. Verbinden Sie dann den kombinierten Pluspol mit dem/der… ampdie positive Ausgangsleistung des Verstärkers und die kombinierte negative Ausgangsleistung an den amplifier's negative output. This configuration results in a 1-Ohm load, suitable for amplifiers stable at 1-Ohm.
• 4-Ohm Load (Series Wiring): Verbinden Sie den Pluspol der einen Schwingspule mit dem Minuspol der anderen Schwingspule. Verbinden Sie dann den verbleibenden freien Pluspol mit dem ampden positiven Ausgang des Verstärkers und den verbleibenden freien negativen Anschluss an den amplifier's negative output. This configuration results in a 4-Ohm load, suitable for amplifiers stable at 4-Ohm.

Abbildung 2: Schräg view of the Kicker CompQ12 Subwoofer, showing the robust construction.

Abbildung 3: Vorderseite view of the Kicker CompQ12 Subwoofer, highlighting the cone and surround.

The subwoofer features high-capacity, dual voice-coil push terminals designed to accommodate up to 8-gauge wire for secure and efficient current flow.

5. Bedienung

Once properly installed and wired, the KICKER CompQ12 subwoofer is ready for operation. Ensure your amplifier settings (gain, crossover, bass boost) are correctly configured to prevent damage to the subwoofer and achieve desired sound quality.

• Continuous Power Handling (RMS): 850 Watt
• Frequenzgang: 20 – 100 Hz
• Nennimpedanz: 2 Ohms (per voice coil)

Start with low volume levels and gradually increase, listening for any signs of distortion. Adjust amplifier settings as needed. The subwoofer is designed to handle significant power, but exceeding its RMS rating or driving it into audible distortion can cause damage.

6. Wartung

The KICKER CompQ12 subwoofer requires minimal maintenance. Follow these guidelines to ensure its longevity:

• Keep the subwoofer cone and surround free from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid exposing the subwoofer to direct sunlight or extreme temperatures for extended periods.
• Überprüfen Sie regelmäßig alle Kabelverbindungen, um sicherzustellen, dass sie fest sitzen und frei von Korrosion sind.
• Do not apply any chemicals or solvents to the subwoofer's cone or surround.

7. Fehlerbehebung

If you experience issues with your KICKER CompQ12 subwoofer, refer to the following common problems and solutions:

8. Spezifikationen

9. Garantie und Support

The KICKER CompQ12 Subwoofer comes with a Eingeschränkte Garantie. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official KICKER webWebsite.

For technical support, troubleshooting assistance, or to inquire about service, please contact KICKER customer support or visit the official KICKER store online:

Visit the KICKER Store