Einführung
The Phanteks Enthoo Evolv ATX Tempered Glass Edition computer case is designed to offer a premium building experience with a focus on aesthetics and functionality. It features sandblasted aluminum construction combined with tempered glass side panels, providing a clear view of internal components. This manual provides essential information for the setup, operation, and maintenance of your computer case.
Abbildung 1: Schräg view of the Phanteks Enthoo Evolv ATX Tempered Glass Edition case.
Hauptmerkmale
- Premium-Konstruktion: Aluminum body (3mm thick) with left and right tempered glass side panels (4mm thick).
- Clean Interior Design: Hidden PSU and HDD compartments for a tidy build.
- RGB-LED-Beleuchtung: Integrated RGB LED lights with 10 colors and illumination effects (Breathing, Static, Color Cycle).
- Optimierter Luftstrom: Direct airflow path to CPU and GPU. Includes three Phanteks premium fans (2x 140mm front, 1x 140mm rear).
- Erweiterte Kühlunterstützung: Three installation areas for radiators, offset radiator bracket for memory clearance (120mm or 140mm form factor), reservoir mounting locations, and a pump bracket with vibration dampERS.
- Speicherlösungen: Two Drop-N-Lock SSD brackets included. Three modular HDD brackets. Removable HDD cage for long PSUs (>180mm) or water pumps.
- Einfache Wartung: Removable dust filters (front, bottom, top integrated) and quick-release panels for easy access.
- Spielraum: Supports long GPUs up to 420mm (with modular bracket removed).
Installationshandbuch
1. Vorbereitung des Falls
Before installing components, ensure the case is placed on a stable, flat surface. Remove the tempered glass side panels by unscrewing the four thumb screws on each panel and carefully lifting them away. The front and top panels can also be removed for easier access during installation.
Figure 2: Case with tempered glass side panels removed for access.
Figure 3: Front panel removed, revealing the front fan mounts and dust filter.
Figure 4: Top panel removed, showing the removable radiator bracket.
2. Motherboard-Installation
Install the I/O shield into the rear opening of the case. Align your ATX motherboard with the standoffs inside the case. Secure the motherboard using the provided screws. Ensure all necessary cables can reach their respective ports.
Abbildung 5: Innenraum view highlighting the motherboard tray and cable routing options.
3. Installation des Netzteils
The power supply unit (PSU) mounts at the bottom rear of the case. Slide the PSU into its designated compartment from the rear. Secure it with screws. If installing a long PSU, the modular HDD cage may need to be removed.
Abbildung 6: View of the PSU shroud and bottom compartment.
4. Laufwerkinstallation
Das Gehäuse unterstützt mehrere Speicherlaufwerke:
- 2.5"-SSDs: Utilize the two Drop-N-Lock SSD brackets located on the back of the motherboard tray.
- 3.5"-Festplatten: Install up to three 3.5" hard drives using the modular HDD brackets. These are typically located in the front-bottom section of the case.
Figure 7: Drop-N-Lock SSD brackets for 2.5-inch drives.
Figure 8: Modular HDD cage for 3.5-inch drives.
5. Lüfter- und Kühlerinstallation
The case comes pre-installed with three 140mm fans (two front, one rear). Additional fans or radiators can be installed:
- Front: Unterstützt bis zu 3x 120-mm- oder 2x 140-mm-Lüfter/Radiatoren.
- Spitze: Supports up to 3x 120mm or 2x 140mm fans/radiators. Use the removable radiator bracket for easier installation and to avoid memory conflicts.
- Hinteren: Supports 1x 120mm or 1x 140mm fan/radiator.
The integrated PWM hub allows for centralized fan control. Connect your case fans and CPU fan to this hub, then connect the hub to your motherboard's CPU fan header for synchronized fan speed control.
Figure 9: Removable top radiator bracket.
Abbildung 10: Bspample of water cooling component placement within the case.
6. Kabelmanagement
Utilize the numerous cable routing cutouts and integrated Velcro straps on the back of the motherboard tray to manage cables. This ensures optimal airflow and a clean aesthetic.
Abbildung 11: Innenraum hinten view with cable routing channels and Velcro straps.
7. Front-E/A-Anschlüsse
Connect the front panel USB 3.0, USB 2.0, audio, and power/reset switch cables to the corresponding headers on your motherboard. The case features 2x USB 3.0 and 2x USB 2.0 ports on the top front panel.
Figure 12: Top front I/O panel with USB 3.0, USB 2.0, and audio ports.
Bedienungsanleitung
RGB-LED-Steuerung
The case features integrated RGB LED lighting. The front panel LED can be controlled via a dedicated button on the top I/O panel or synchronized with compatible motherboard RGB software (e.g., ASUS Aura Sync, MSI Mystic Light) by connecting the appropriate cable from the case to your motherboard's RGB header. Cycle through 10 colors and various effects like Breathing, Static, and Color Cycle.
Wartung
Reinigung des Staubfilters
Regular cleaning of the dust filters is recommended to maintain optimal airflow and prevent dust buildup inside your system. The Enthoo Evolv ATX Tempered Glass Edition includes easily removable dust filters:
- Frontfilter: Accessible after removing the front panel.
- Bodenfilter: Slides out from the rear of the case.
- Top-Filter: Integrated into the top panel, accessible when the top panel is removed.
To clean, simply slide out or remove the filters, gently brush off accumulated dust, or rinse with water if heavily soiled (ensure they are completely dry before reinstallation).
Figure 13: Removable bottom dust filter for easy cleaning.
Tempered Glass Panel Care
The tempered glass panels can be cleaned with a soft, lint-free cloth and a mild glass cleaner. Avoid abrasive materials or harsh chemicals that could scratch or damage the glass.
Fehlerbehebung
- System schaltet sich nicht ein:
- Überprüfen Sie alle Stromanschlüsse, einschließlich der 24-Pin-ATX-, 8-Pin-CPU- und GPU-Stromkabel.
- Ensure the PSU switch is in the "On" position.
- Verify front panel power switch connections to the motherboard.
- Lüfter drehen sich nicht:
- Confirm fan cables are securely connected to the motherboard or the PWM hub.
- Check BIOS settings for fan control.
- RGB-Lichter funktionieren nicht:
- Ensure the RGB cable from the case is connected to the motherboard's RGB header (if using software control).
- Verify the dedicated RGB button on the case is functioning.
- USB-Anschlüsse funktionieren nicht:
- Check the internal USB 3.0 and USB 2.0 headers are correctly connected to the motherboard.
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellname | Phanteks Enthoo Evolv ATX Computer Case |
| Modellnummer | PH-ES515ETG_GS |
| Gehäusetyp | ATX-Mid-Tower |
| Material | Aluminium, gehärtetes Glas |
| Abmessungen (LxBxH) | 19.5 x 9.25 x 20.1 Zoll (495 x 235 x 510 mm) |
| Gewicht | 29 Pfund (13.15 kg) |
| Motherboard-Kompatibilität | E-ATX (up to 264mm wide), ATX, Micro ATX, Mini ITX |
| Erweiterungssteckplätze | 7 |
| Interne 3.5"-Laufwerksschächte | 3 (modular) |
| Interne 2.5"-Laufwerksschächte | 2 (Drop-N-Lock SSD brackets) |
| E/A an der Vorderseite | 2x USB 3.0, 2x USB 2.0, Microphone, Headphone, RGB LED Control |
| Vorinstallierte Lüfter | 2x 140mm (Front), 1x 140mm (Rear) |
| Lüfterhalterung (Vorderseite) | 3 x 120 mm oder 2 x 140 mm |
| Fanunterstützung (Top) | 3 x 120 mm oder 2 x 140 mm |
| Lüfterhalterung (hinten) | 1 x 120 mm oder 1 x 140 mm |
| Kühlerhalterung (vorne) | Up to 360mm or 280mm |
| Kühlerhalterung (oben) | Up to 360mm or 280mm |
| Kühlerhalterung (hinten) | 120mm oder 140mm |
| GPU-Freigabe | 420mm (without HDD cages), 300mm (with HDD cages) |
| Höhe des CPU-Kühlers | 194 mm |
| Netzteillängenabstand | 210mm (without HDD cages), 180mm (with HDD cages) |
Garantie und Support
Informationen zur Garantie und zum technischen Support finden Sie auf der offiziellen Phanteks-Website. webBesuchen Sie die Website oder kontaktieren Sie direkt den Kundenservice. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
Phanteks Official WebWebsite: www.phanteks.com