Satco S9750 30W LED HID Replacement Light Bulb Instruction Manual

Einführung

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Satco S9750 30W LED HID Replacement Light Bulb. This Hi-Pro multi-beam LED lamp is designed for industrial and commercial applications, offering high lumen output and adjustable, multi-directional light. It is a direct wire range voltage 100-277V replacement for HID, CFL, and incandescent bulbs, approved for totally enclosed fixtures.

Sicherheitshinweise

• WARNUNG: Risk of electric shock. Disconnect power before installation or servicing.
• Sicherstellung der Versorgungsvoltage is compatible with the bulb's operating voltage (100-277 V).
• Die Glühbirne darf nicht auseinandergenommen oder verändert werden. Sie enthält keine vom Benutzer austauschbaren Teile.
• Diese Glühbirne eignet sich für den Einsatz in damp locations and approved for totally enclosed fixtures.
• Always handle the bulb by its base to avoid damaging the LED panels.
• Ziehen Sie einen qualifizierten Elektriker zu Rate, wenn Sie sich bei irgendeinem Teil des Installationsprozesses unsicher sind.

Packungsinhalt

Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden und unbeschädigt sind.

• 1 x Satco S9750 30W LED HID Replacement Light Bulb

Setup und Installation

Follow these steps for proper installation of your Satco S9750 LED HID Replacement Light Bulb:

1. Stromabschaltung: Before beginning any installation, ensure the power to the fixture is turned off at the circuit breaker.
2. Alte Glühbirne entfernen: Carefully remove the existing HID, CFL, or incandescent bulb from the fixture.
3. Ballast-Bypass: This LED bulb requires a direct wire connection and bypasses the existing ballast. If your fixture has a ballast, it must be bypassed or removed by a qualified electrician. The bulb operates on a direct wire range voltagvon 100-277V.
4. Überprüfen Sie die Gerätekompatibilität: Ensure the fixture has a medium (E26) base. The minimum compartment size for enclosed fixtures is 11 inches (Length) x 8 inches (Width) x 8 inches (Depth). The lamp length is 6.37 inches, and the diameter is 3.18 inches when closed, expanding to 7.68 inches when open.
5. Neue Glühbirne einbauen: Screw the Satco S9750 LED bulb firmly into the medium (E26) base socket. Do not overtighten.
6. Strom wiederherstellen: Once the bulb is securely installed and any necessary ballast bypass is complete, restore power at the circuit breaker.

Bedienungsanleitung

The Satco S9750 features adjustable light panels, allowing you to customize the beam angle for various lighting needs.

• Abstrahlwinkel einstellen: The light panels can be manually adjusted and locked into place to create three distinct beam angle options:
  • 360° Beam: Panels fully closed, providing a wide, omnidirectional light spread (approx. 3.2 inches width).
  • 270° Beam: Panels partially open, directing light over a broader area (approx. 6.8 inches width).
  • 180° Beam: Panels fully open, concentrating light in a specific direction (approx. 7.7 inches width).
• Gently move the panels to the desired position until they click or lock into place. Avoid excessive force.

Wartung

The Satco S9750 LED bulb requires minimal maintenance.

• Reinigung: Ensure power is disconnected before cleaning. Use a soft, dry cloth to wipe the bulb. Do not use liquid cleaners or abrasive materials.
• Inspektion: Überprüfen Sie regelmäßig die Glühbirne und die Fassung auf Anzeichen von Beschädigungen oder lockere Verbindungen.

Fehlerbehebung

If your Satco S9750 LED bulb is not functioning correctly, consider the following:

• Kein Licht:
  • Prüfen Sie, ob die Stromversorgung der Leuchte eingeschaltet ist.
  • Ensure the bulb is screwed in tightly to the socket.
  • Verify that the ballast has been properly bypassed or removed.
  • Inspect the circuit breaker for any tripped circuits.
• Flackerndes Licht:
  • Stellen Sie sicher, dass die Glühbirne fest in der Fassung sitzt.
  • Prüfen Sie die Stromversorgung auf Stabilität.

If issues persist after performing these checks, contact customer support.

Technische Daten

Garantie und Support

The Satco S9750 LED HID Replacement Light Bulb comes with a 5 Jahr eingeschränkte Garantie.

For warranty claims, technical support, or further assistance, please contact Satco customer service through their official website or the retailer where the product was purchased. Please have your model number (S9750) and proof of purchase available when contacting support.