1. Einleitung
Thank you for choosing the Steinel L 240 S LED Outdoor Wall Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new outdoor lighting solution. Please read these instructions carefully before beginning installation or use, and keep them for future reference.
2. Sicherheitshinweise
- Elektroinstallation: Die Installation muss von einem qualifizierten Elektriker gemäß den nationalen Verdrahtungsvorschriften und den örtlichen Elektrovorschriften durchgeführt werden.
- Stromabschaltung: Always disconnect the power supply before performing any work on the light fixture.
- Bandtage: Sicherstellung der Versorgungsvoltage matches the specifications of the light (230 Volts).
- Schaden: Do not operate the light if it is damaged. Contact customer service for assistance.
- Änderungen: Verändern Sie das Produkt in keiner Weise. Nicht autorisierte Änderungen können zum Erlöschen der Garantie führen und Sicherheitsrisiken bergen.
- Betriebsumgebung: This product is designed for outdoor use and is water-resistant (IP44). Do not submerge it in water.
3. Packungsinhalt
Vor der Installation prüfen Sie, ob alle Komponenten vorhanden sind:
- Steinel LED Outdoor Light L 240 S
- Mounting material (4 x screws, 4 x wall plugs, 4 x spacers, 2 x securing screws, sealing plug)
- Masking plates for sensor adjustment
- Bedienungsanleitung
4. Produktüberschreitungview und Funktionen
The Steinel L 240 S is an efficient LED outdoor wall light featuring an integrated infrared motion sensor. It provides optimal illumination for entrances and patios with a warm-white light (3000 Kelvin).
Hauptmerkmale:
- Optimale Beleuchtung: Efficient Steinel LEDs provide 946 lumens of warm-white light (3000K).
- Zuverlässige Erkennung: 180-degree infrared sensor with a detection range of up to 10 meters.
- Lange Lebensdauer: LEDs designed for approximately 30 years of use, eliminating the need for frequent bulb replacement.
- Langlebige Konstruktion: Impact-resistant LED wall light with a stainless steel panel.
- Einstellbarer Sensor: Sensor can be rotated vertically by 90 degrees for precise detection area targeting.
- Anpassbare Einstellungen: Stepless adjustment of light duration and brightness (twilight threshold).
- Energieeffizienz: Contains a light source of energy efficiency class D.
5. Installation
The Steinel L 240 S LED Outdoor Wall Light is designed for straightforward installation, similar to conventional light fixtures. However, for safety and optimal performance, professional installation by a qualified electrician is highly recommended.
Installationsschritte:
- Bereiten Sie den Installationsort vor: Choose a suitable location on an outdoor wall. Ensure the power supply to the installation area is switched off at the main circuit breaker.
- Bohrpunkte markieren: Use the light fixture as a template to mark the drilling points on the wall.
- Löcher bohren und Stopfen einsetzen: Bohren Sie an den markierten Stellen Löcher und setzen Sie die mitgelieferten Dübel ein.
- Verkabelung anschließen: Connect the electrical wires (Live, Neutral, Earth) to the corresponding terminals in the light fixture. Ensure all connections are secure.
- Montieren Sie die Vorrichtung: Secure the light fixture to the wall using the provided screws and spacers.
- Strom wiederherstellen: Once the light is securely mounted and wired, restore power at the main circuit breaker.
After installation, proceed to adjust the sensor settings as described in Section 7.
6. Bedienung
The Steinel L 240 S LED Outdoor Wall Light operates automatically based on motion detection and ambient light levels. When the sensor detects movement within its detection range and the ambient light falls below the set twilight threshold, the light will switch on for the pre-configured duration.
7. Anpassung der Einstellungen
The light offers several adjustable settings to customize its behavior:
- Sensorrotation: The infrared sensor can be rotated vertically by 90 degrees. This allows you to precisely define the detection area and avoid unwanted triggers.
- Zeiteinstellung: Adjust the duration the light remains on after motion detection. This setting is stepless, allowing fine-tuning.
- Dämmerungsschwelle: Set the ambient brightness level at which the motion sensor becomes active. This is also a stepless adjustment.
- Masking Plates: Use the included masking plates to further restrict the sensor's detection area, for example, to exclude public pathways or neighboring properties.
8. Wartung
The Steinel L 240 S LED Outdoor Wall Light requires minimal maintenance.
- Reinigung: Reinigen Sie die Leuchte regelmäßig mit einem weichen, fusselfreien Tuch.amp Mit einem Tuch abwischen. Verwenden Sie keine Scheuermittel oder Lösungsmittel, da diese die Oberfläche beschädigen können.
- LED-Lebensdauer: The integrated LEDs have a long lifespan (approx. 30 years), meaning there is no need to replace bulbs.
- Inspektion: Periodically check the light for any signs of damage or wear. If any issues are found, disconnect power and contact customer service.
9. Fehlerbehebung
If you experience issues with your Steinel L 240 S, refer to the following troubleshooting guide:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. | Keine Stromversorgung. Twilight threshold set too high. Sensor detection area obstructed or incorrectly aimed. | Leistungsschalter prüfen. Adjust twilight threshold to a lower setting. Adjust sensor angle or clear obstructions. |
| Licht bleibt dauerhaft an. | Kontinuierliche Bewegung im Erfassungsbereich. Time setting too long. Sensor defekt. | Adjust sensor detection area or use masking plates. Reduce the time setting. Kontaktieren Sie den Kundenservice. |
| Das Licht schaltet sich ohne erkennbare Bewegung ein. | Sensoren zur Erkennung von Kleintieren, sich bewegenden Ästen oder Wärmequellen. Die Sensorempfindlichkeit ist zu hoch. | Adjust sensor angle, use masking plates, or reduce sensitivity if adjustable (refer to full manual). |
| Licht flackert. | Instabile Stromversorgung. Wackelkontakt. | Lassen Sie die Stabilität der Stromversorgung von einem Elektriker überprüfen. Ensure all wiring connections are secure (disconnect power first). |
10. Spezifikationen
| Besonderheit | Spezifikation |
|---|---|
| Modellnummer | 010461 |
| Abmessungen (L x B x H) | 8.1 x 16.5 x 30.5 cm |
| Gewicht | 840 g |
| Material | UV-resistant plastic with stainless steel trim |
| Farbe | Edelstahl |
| Lichtquelle | LED |
| Wastage | 9.3 Watt |
| Helligkeit | 946 Lumen (max.) |
| Farbtemperatur | 3000 Kelvin (Warmweiß) |
| Bandtage | 230 Volt |
| Bewegungssensor | 180-degree Infrared |
| Erfassungsbereich | Bis zu 10 Meter |
| Schutzklasse | IP44 (wasserbeständig) |
| Schlagfestigkeit | IK07 |
| Montagetyp | Wandmontage |
| Energieeffizienzklasse | D |
11. Garantie und Support
Steinel products are known for their quality and reliability. This product comes with a 3 Jahr Herstellergarantie, covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
For technical support, warranty claims, or any questions regarding your Steinel L 240 S LED Outdoor Wall Light, please contact Steinel customer service. You can find contact information on the official Steinel webWebsite oder über Ihren Händler.
Deutsche Ingenieurskunst: Designed in Germany, Steinel products are developed to provide energy efficiency, comfort, and safety.