Focusrite Scarlett OctoPre Dynamic: 8-Channel Mic Preamp Bedienungsanleitung

Einführung

The Focusrite Scarlett OctoPre Dynamic is an 8-channel microphone preamplifier designed to expand the input and output capabilities of your audio interface. It features eight high-quality Scarlett mic preamps, precision AD/DA conversion up to 192 kHz, and analogue compression on every channel. This unit is ideal for recording multiple sources simultaneously, such as drums, guitars, keyboards, and vocals, providing professional-grade audio expansion for your studio setup.

Aufstellen

1. Auspacken und Erstinspektion

Carefully remove the Scarlett OctoPre Dynamic from its packaging. Ensure all included components are present: the Scarlett OctoPre Dynamic unit, a Getting Started Guide, and a Power Cable. Inspect the unit for any signs of physical damage. If any damage is found, contact your retailer immediately.

2. Physische Verbindungen

The Scarlett OctoPre Dynamic connects to your audio interface primarily via ADAT optical cables. It also features various analog inputs and outputs.

Image: Front Panel Overview. This image displays the front panel of the Scarlett OctoPre Dynamic, showing the first two combination inputs (XLR/TRS), gain knobs, pad switches, and compression controls for each channel. The LED metering and power switch are also visible on the right side.

Abbildung: Anschlüsse auf der Rückseite. This image shows the rear panel of the Scarlett OctoPre Dynamic, highlighting the ADAT optical input/output, Word Clock I/O, line outputs, and mic/line inputs 3-8. The power input is on the far left.

1. Stromanschluss: Connect the supplied power cable to the unit and a suitable power outlet.
2. ADAT Connection: Use an ADAT optical cable (not included) to connect the ADAT OUT port on the Scarlett OctoPre Dynamic to the ADAT IN port on your audio interface. If your interface supports dual ADAT, you may use a second cable for additional channels at higher sample Preise.
3. Word Clock (Optional): For advanced synchronization with other digital devices, connect a Word Clock cable from your master clock device to the Word Clock IN on the OctoPre Dynamic, and/or from the OctoPre Dynamic's Word Clock OUT to other devices.
4. Analoge Eingänge:
   • Front Panel Inputs (1-2): These are combo XLR/TRS inputs for microphones, line-level sources, or instruments.
   • Rear Panel Inputs (3-8): These are combo XLR/TRS inputs for microphones or line-level sources.
5. Line-Ausgänge: The eight balanced line outputs can be used to send audio to a mixing console, monitor speakers, or other outboard gear.

3. Software-Setup

The Scarlett OctoPre Dynamic is designed to work with any ADAT-equipped audio interface. Configuration and routing are typically managed through your primary audio interface's control software (e.g., Focusrite Control for Scarlett interfaces). Ensure your audio interface drivers are up-to-date.

• Treiberinstallation: Install the latest drivers for your primary audio interface from the manufacturer's webWebsite.
• Softwaresteuerung: Open your audio interface's control software. You should see the additional ADAT inputs from the Scarlett OctoPre Dynamic available for routing and monitoring.
• Sample Rate Synchronization: Stellen Sie dieample rate in your DAW and your audio interface's control software to match. The Scarlett OctoPre Dynamic supports sampFrequenzen bis zu 192 kHz.

Operating the Scarlett OctoPre Dynamic

Bedienelemente auf der Vorderseite

• Verstärkungsregler: Adjust the input gain for each of the eight channels.
• PAD Switches: Engage the PAD switch for inputs with very high signal levels to prevent clipping.
• INST Switches (Inputs 1-2): Engage for direct connection of instruments (guitars, basses) to optimize impedance.
• 48V Phantomspeisung: Individual 48V phantom power switches are available for each channel to power condenser microphones.
• Compression Controls: Each channel features a single-knob analog compressor.
  • COMP-Knopf: Passt den Grad der Komprimierung an.
  • MEHR-Taste: Doubles the compression ratio for a more pronounced effect.
  • O/L LED: Indicates overload/clipping.
• LED Input Metering: A 5-segment LED meter for each channel provides visual feedback on input levels.
• Sample Rate/Sync Indicators: LEDs display the current sample rate and synchronization status.
• Stromschalter: Schaltet das Gerät ein oder aus.

Image: Analog Compression Controls. This close-up shows the individual compression knobs and 'More' buttons for each channel, allowing for dynamic control of input signals. The O/L (Overload) LEDs are also visible.

Anschlüsse auf der Rückseite

• Mikrofon-/Line-Eingänge (3-8): Combo XLR/TRS jacks for connecting microphones or line-level sources.
• Leitungsausgänge (1-8): Balanced TRS outputs for sending audio signals.
• ADAT Optische E/A: Used for digital audio transfer to and from your main audio interface.
• Word Clock I/O: BNC connectors for external clock synchronization.

Verwenden des Geräts

1. Mikrofone/Instrumente anschließen: Plug your microphones into the XLR inputs or instruments into the TRS inputs (1-2).
2. Phantomspeisung aktivieren: If using condenser microphones, activate the 48V phantom power for the respective channels.
3. Verstärkung anpassen: Slowly increase the gain for each channel while monitoring the LED meters to achieve a healthy signal level without clipping.
4. Apply Compression: Use the COMP knob to add analog compression. Engage the 'MORE' button for a stronger compression effect.
5. Audio überwachen: Route the ADAT inputs from the OctoPre Dynamic within your DAW or audio interface control software to monitor the incoming audio.

Wartung

• Reinigung: Use a dry, soft cloth to clean the exterior of the unit. Avoid liquid cleaners or abrasive materials.
• Belüftung: Sorgen Sie für ausreichende Belüftung rund um das Gerät, um eine Überhitzung zu vermeiden. Blockieren Sie keine Lüftungsöffnungen.
• Lagerung: Bewahren Sie das Gerät bei Nichtgebrauch an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.

Fehlerbehebung

• Kein Audiosignal:
  • Check all cable connections (power, ADAT, audio cables).
  • Verify phantom power is engaged for condenser microphones.
  • Ensure gain knobs are turned up sufficiently.
  • Bestätigen Sie sample rates are synchronized between the OctoPre Dynamic, your audio interface, and your DAW.
  • Check routing settings in your audio interface's control software.
• Verzerrter Ton:
  • Reduce input gain to prevent clipping (indicated by O/L LEDs).
  • Engage PAD switches for very hot signals.
  • Prüfen Sie auf defekte Kabel.
• Synchronisierungsprobleme:
  • Ensure the OctoPre Dynamic is correctly slaved to your main audio interface via ADAT or Word Clock.
  • Verify Word Clock settings if external synchronization is used.

Technische Daten

Garantieinformationen

The Focusrite Scarlett OctoPre Dynamic comes with a 2 Jahr Garantie. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official Focusrite website or the included Getting Started Guide.

Abbildung: Garantieinformationen. This image displays a "Three Year Warranty" logo from Focusrite. Note: Product data indicates a 2-year warranty, which is stated in the text.

Unterstützung

For further assistance, technical support, or to download the latest software and documentation, please visit the official Focusrite webWebsite: www.focusrite.com.

Offizielle Produktvideos

Below are official product videos from Focusrite, providing visual guides and demonstrations for the Scarlett OctoPre Dynamic.