Surecom SW-102 Digital VHF/UHF Antenna Power & SWR Meter User Manual

1. Einleitung

The Surecom SW-102 is a compact and versatile digital VHF/UHF antenna power and SWR meter designed for radio enthusiasts and professionals. It provides direct digital readout of VSWR, forward power, and reflected power without the need for calibration. Its low insertion loss allows for permanent connection within your setup. The device also features a built-in frequency counter and displays comprehensive information including frequency, power, SWR, forward power (FW), reflected power (RW), and battery voltage.

2. Sicherheitshinweise

• Setzen Sie das Gerät keinen extremen Temperaturen, Feuchtigkeit oder direkter Sonneneinstrahlung aus.
• Vermeiden Sie es, das Gerät fallen zu lassen oder starken Stößen auszusetzen.
• Versuchen Sie nicht, das Gerät zu zerlegen oder zu verändern. Dadurch erlischt die Garantie und es können Schäden entstehen.
• Use only the specified charger (5V micro USB) to prevent damage to the battery and device.
• Ensure proper connection of all cables and adapters before operation to prevent damage to the meter or connected equipment.
• This device is designed for analog radio systems only and is not compatible with DMR radios.

3. Packungsinhalt

Bitte überprüfen Sie nach dem Öffnen des Pakets, ob alle unten aufgeführten Artikel vorhanden und in einwandfreiem Zustand sind:

• 1x SURECOM SW-102 Meter
• 1x Charger Cable (Micro USB)
• 1x Users Manual
• SL16 to SMA-F Connector (included)
• SL16 to SMA-M Connector (included)

4. Produktüberschreitungview

4.1. Hauptmerkmale

• Direct digital readout of VSWR, Forward Power, and Reflected Power.
• Keine Kalibrierung erforderlich.
• Maximum measurable power range up to 120W.
• Low insertion loss (<0.15dB VHF, <0.25dB UHF) allows permanent connection.
• Built-in Frequency Counter.
• All-function display: Frequency, Power, SWR, FW, RW, Battery voltage.
• Compact and handheld size with large LCD display.

4.2. Komponenten und Bedienelemente

The SW-102 features an N-J Interface for connections. Optional accessories such as SL16 to SMA and SL16 to BNC adapters are available to ensure compatibility with various radio and antenna connectors.

5. Einrichtung

5.1. Connecting the Meter

To connect the Surecom SW-102, connect the output of your transceiver to the "TX" port on the meter. Then, connect your antenna or dummy load to the "ANT" port. Ensure proper adapters or cables are used if your device has different connector types. The device ships with SL16 to SMA-F and SL16 to SMA-M connectors for common applications.

Watch the video below for a visual guide on connecting the SW-102 to your radio and antenna:

5.2. Einschalten

To power on the SW-102, press and hold the Roter Knopf for 2 seconds. To power off, press and hold the Roter Knopf erneut für 2 Sekunden.

6. Bedienungsanleitung

6.1. Messen

Once connected and powered on, the SW-102 will display real-time measurements. To measure SWR and power, ensure the meter is in a vertical position and avoid touching the antenna during measurement. Press the PTT (Push-To-Talk) button on your radio to transmit, and the meter will display the VSWR, transmit power, and other relevant data.

Die Voltage Standing Wave Ratio (VSWR) is an indication of the amount of mismatch between an antenna and the feed line connecting to it. The range of values for VSWR is from 1 to ∞. A VSWR value under 2 is considered suitable for most antenna applications. The antenna can be described as having a good match. So when someone says that the antenna is poorly matched, very often it means that the VSWR value exceeds 2 for a frequency of interest.

6.2. Einführung anzeigen

The LCD display provides comprehensive information at a glance. Key indicators include:

• Batteriestatus
• Arbeitszeit
• Sendeleistung (W)
• Sendefrequenz (MHz)
• VSWR (Bdtage Stehwellenverhältnis)
• Forward Power (FW)
• Reflected Power (RW)

6.3. Function Memory Save

To save function memory settings:

1. Drücken Sie die MENU (Blue button).
2. Drücken F1 (Red button) to select a function (1-6).
3. Adjust values using the Blue button (-) Und Yellow button (+).
4. Drücken Sie die Roter Knopf zur Bestätigung 2 Sekunden lang gedrückt.
5. Drücken Sie die Blaue Taste to SAVE and EXIT.

7. Wartung

7.1. Laden des Akkus

The SW-102 is equipped with a 3.7V Li-ion rechargeable battery (14500 type). To charge the device, connect the provided USB charger cable to the micro USB port on the side of the meter and plug the other end into a 5V (0.5-1A) USB power source.

7.2. Energiesparfunktionen

• Das Gerät verfügt über eine Automatische Abschaltung function, configurable from 1 to 9 minutes.
• Der Hintergrundbeleuchtung also has an AUTO OFF feature, configurable from 1 to 9 minutes, to conserve battery life.

8. Fehlerbehebung

• If the device does not power on, ensure the battery is charged.
• If readings are inconsistent, check all cable connections for tightness and proper adapter usage.
• Ensure the SW-102 is used with analog radios only. Es ist not compatible with DMR radios.
• For significant discrepancies in SWR readings, verify the antenna's condition and proper installation.

9. Spezifikationen

10. Garantie und Support

Specific warranty information and detailed support contacts are not provided in this manual. Please refer to the product packaging or the manufacturer's official webAuf dieser Webseite finden Sie Details zur Garantie und zu den Kundendienstoptionen.