Aideepen TDA7492P 2x50W Dual Channel Amplifier Board Benutzerhandbuch

1. Produktüberschreitungview

The Aideepen TDA7492P 2x50W Dual Channel Amplifier Board is designed to provide high-quality stereo audio amplification for various speaker systems. Featuring Bluetooth wireless connectivity, this board is suitable for home or vehicle audio streaming applications.

Hauptmerkmale:

• 50W+50W HIFI Board: Delivers 2x50W of power for multi-speaker setups with 8 ohms impedance.
• Upgraded Version (AD-001): Incorporates the TDA7492P chip with enhanced capacitor resistance for improved stereo sound and better heat dissipation. Features gold-plated mounting holes for durability and aesthetics.
• Bluetooth-Konnektivität: Compatible with most smartphones for wireless music streaming. Note: Not compatible with computers.
• Integrated Control Buttons: Includes responsive buttons for power, previous track, next track, play/pause, volume up, and volume down. A Bluetooth indicator flashes red and blue alternately when ready for pairing.
• Kompaktes Design, kraftvoller Klang: Despite its small size, this amplifier can achieve 110-120 dB output with high-efficiency drivers.

Abbildung 1.1: Oben view of the Aideepen TDA7492P Dual Channel Amplifier-Board.

2. Packungsinhalt

Ensure all items are present and in good condition upon opening the package.

• 1x TDA7492P Audio Receiver Amplifier-Board

Abbildung 2.1: Die amplifier board as received in its packaging.

3. Sicherheitshinweise

Please read and understand all safety instructions before operating this device. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Stromversorgung: Use a DC power supply between 8V and 24V. Ensure the power supply's output current is sufficient (at least 2A recommended for optimal performance). The power connector is 5.5mm outside diameter, 2.1mm inside diameter, with positive on the inside and negative on the outside.
• Verdrahtung: Always distinguish between positive and negative terminals when connecting speakers. Incorrect wiring can damage the amplifier board or speakers.
• Umfeld: Do not expose the device to moisture, extreme temperatures, or direct sunlight. Operate in a well-ventilated area.
• Handhabung: Vermeiden Sie es, die Bauteile der Leiterplatte zu berühren, während das Gerät eingeschaltet ist.

4. Einrichtungsanweisungen

Follow these steps to set up your Aideepen TDA7492P amplifier-Board.

1. Prepare Speakers: Ensure your speakers are rated for 8 ohms impedance. Strip a small amount of insulation from the ends of your speaker wires.
2. Lautsprecher anschließen: Loosen the screws on the green terminal blocks (speaker outputs) on the amplifier board. Carefully insert the speaker wires, ensuring the positive (+) and negative (-) wires are connected to the corresponding terminals for each channel (L+ L- for left, R+ R- for right). Tighten the screws to secure the wires.
3. Strom anschließen: Plug a compatible DC power adapter (8-24V, at least 2A, 5.5x2.1mm barrel connector, center positive) into the power input jack on the board.
4. Einschalten: After connecting the power, the Bluetooth indicator LED on the board will begin to flash, indicating it is ready for pairing.

Abbildung 4.1: Ausführlich view of speaker and power connection points on the amplifier-Board.

Figure 4.2: Labeled diagram of the amplifier board showing Bluetooth antenna, indicator, buttons, and power interface.

5. Bedienungsanleitung

Sobald das amplifier board is set up, you can begin streaming audio wirelessly.

1. Bluetooth-Pairing:
   • Stellen Sie sicher, dass amplifier board is powered on and the Bluetooth indicator is flashing (red and blue alternately).
   • Navigieren Sie auf Ihrem Smartphone oder einem anderen Bluetooth-fähigen Gerät zu den Bluetooth-Einstellungen.
   • Suchen nach verfügbare Geräte. amplifier board will typically appear as "SANWU Audio" or a similar identifier.
   • Wählen Sie die amplifier board to pair. Once connected, the Bluetooth indicator LED will typically show a solid blue light or a slower flash.
2. Audiowiedergabe:
   • Open your preferred music player application on your connected device.
   • Start playing audio. Sound will be routed through the amplifier board to your connected speakers.
3. Using On-Board Controls: Der amplifier board features several buttons for direct control:
   • WIEDERGABE/PAUSE: Schaltet die Wiedergabe um.
   • ZURÜCK: Springt zum vorherigen Titel.
   • NÄCHSTE: Springt zum nächsten Titel.
   • VOL+: Erhöht die Lautstärke.
   • VOL-: Verringert die Lautstärke.

Abbildung 5.1: Die amplifier board connected to speakers and streaming music from a smartphone via Bluetooth.

6. Wartung

Durch sachgemäße Wartung wird die Langlebigkeit und optimale Leistung Ihres Geräts sichergestellt. amplifier-Board.

• Reinigung: Use a soft, dry cloth to gently wipe the surface of the board. Avoid using liquid cleaners or solvents, as these can damage components.
• Lagerung: When not in use for extended periods, store the board in a cool, dry place away from direct sunlight and dust.
• Handhabung: Always handle the board by its edges to avoid touching sensitive electronic components.

7. Fehlerbehebung

Sollten Sie Probleme mit Ihrem ampVerstärkerplatine, siehe die folgenden häufigen Probleme und Lösungen:

8. Spezifikationen

Detailed technical specifications for the Aideepen TDA7492P Amplifier-Board.

9. Garantie und Support

The Aideepen TDA7492P Dual Channel Amplifier Board comes with a 6 Monate erweiterte Garantie.

For technical assistance, troubleshooting, or warranty claims, please contact Aideepen customer service. Our team is available 24/7 to provide friendly support.

Kontaktinformationen:

• WebWebsite: www.aideepen.com (Bitte überprüfen Sie die offizielle Website.) web(Die aktuellsten Kontaktdaten finden Sie auf der Website.)
• E-Mail: Siehe Produktverpackung oder offizielle Angaben. webWebsite für Support-E-Mail.