Anderic Replacement FAN-9T Remote Control User Manual

Einführung

This manual provides comprehensive instructions for the Anderic Replacement FAN-9T Thermostatic Remote Control, designed specifically for Hampton Bay ceiling fans.

Bild: Vorderseite view of the Anderic FAN-9T remote control, showing the display and various control buttons.

Kompatibilität

The Anderic FAN-9T remote control is compatible with Hampton Bay ceiling fans. To ensure compatibility, verify that your original remote control has "FAN-9T" printed on its back. This remote features FCC ID: L3HFAN9T and PN: FAN9TR.

Wichtiger Hinweis: This remote control provides on/off functionality for lights and does not support dimming. If your original remote for a Windward II 54-inch Ceiling Fan has a model number starting with "CHQ" (located on the back), you may require the RR7096TR model with a yellow light button, even if your original has a green light button.

Hauptmerkmale

• Rückwärtsbetrieb: Easily switch the ceiling fan's rotation direction for optimal airflow in different seasons.
• Thermostatic Function: Set a desired temperature, and the remote will automatically adjust fan speed to maintain a comfortable environment.
• Lights On/Off Control: Conveniently turn your ceiling fan's lights on or off with a dedicated button.
• Temperaturumrechnung: Switch between Celsius and Fahrenheit temperature displays by holding the TEMP UP and TEMP DOWN buttons simultaneously for 3 seconds.
• Wall Mount Holder: Includes a wall mount holder for convenient storage and accessibility of the remote.

Installationsanweisungen

Before using your new Anderic FAN-9T remote control, follow these steps to install batteries and set the correct code for your ceiling fan receiver.

1. Einlegen der Batterie

1. Remove the battery cover located on the back of the remote control. Press firmly below the arrow and slide the cover off.
2. Legen Sie vier (4) AAA-Batterien ein und achten Sie dabei auf die richtige Polarität (+/-).
3. Setzen Sie die Batterieabdeckung wieder auf.

Bild: Rückseite view of the remote control with the battery cover removed, revealing the battery slots and DIP switches.

2. Setting the Code (DIP Switches)

The remote control and your ceiling fan receiver must be set to the same code for proper communication. This unit has 16 different code combinations. Ensure your fan is operated in "HIGH SPEED" and the light is in "ON" condition at the switch knob before proceeding.

1. Einstellen des Codes auf der Fernbedienung:
   • With the battery cover removed, locate the DIP switches inside the battery compartment.
   • Slide the code switches to your desired up or down position. (Factory setting is all up. Do not use this position unless it matches your receiver.) Use a small screwdriver or a ballpoint pen to firmly slide the switches.
   • Replace the battery cover on the transmitter (remote).
2. Einstellen des Codes am Empfänger:
   • Locate the receiver unit within your ceiling fan assembly.
   • Slide the code switches on the receiver to the exact same positions (up/down) as you set on your remote control.

Image: Diagram illustrating how to set the code switches on both the remote control (transmitter) and the ceiling fan receiver.

Once both the remote and receiver codes are matched, your remote control should be ready for operation.

Bedienungsanleitung

Familiarize yourself with the buttons on your Anderic FAN-9T remote control to operate your ceiling fan effectively.

Bild: Abgewinkelt view of the Anderic FAN-9T remote control, highlighting the button layout.

• Lüfterdrehzahlregelung: Use the "MANUAL LOW" and "HIGH" indicators on the display to adjust fan speed. The remote automatically adjusts fan speed in thermostatic mode.
• FAN AUTO Button: Activates or deactivates the automatic fan speed adjustment based on the set temperature.
• FOR/REV Button: Press this button to change the direction of the fan blades (forward for cooling, reverse for heat circulation).
• Lichttaste: Press to turn the ceiling fan lights ON or OFF. (Note: This remote does not support dimming.)
• TIMER-Taste: Activates the fan timer function. Refer to your fan's specific instructions for timer settings.
• LIGHT DELAY Button: Activates the light delay function. Refer to your fan's specific instructions for light delay settings.
• TEMP UP / TEMP DOWN Buttons: Adjust the desired temperature setting for the thermostatic function.
• Temperature Unit Conversion (C/F): To switch between Celsius and Fahrenheit, hold down the TEMP UP and TEMP DOWN buttons simultaneously for 3 seconds.

Wartung

• Reinigung: Reinigen Sie die Fernbedienung mit einem weichen, trockenen Tuch. Verwenden Sie keine Scheuermittel oder Lösungsmittel.
• Batteriewechsel: Replace batteries when the remote's performance degrades or the display becomes dim. Always use new AAA batteries and dispose of old batteries responsibly.
• Lagerung: Bei längerem Nichtgebrauch die Batterien entfernen, um ein Auslaufen zu verhindern. Die Fernbedienung an einem kühlen, trockenen Ort aufbewahren.

Image: The Anderic FAN-9T remote control securely placed in its included wall mount holder.

Fehlerbehebung

Technische Daten

Support-Informationen

Anderic is committed to providing high-quality replacement remote controls and accessories. For further assistance or inquiries, please refer to the official Anderic webWebsite oder wenden Sie sich an den Kundendienst.

Anderic is a company based in NC, USA, dedicated to ensuring the highest quality standards for their products.