1. Einleitung
Thank you for choosing the Audiovox RCA WHP141B Wireless 900MHz Full-Size Headphones. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new wireless headphones. Designed for comfort and clear audio, these headphones utilize RF (Radio Frequency) technology to deliver sound wirelessly up to 150 feet from the transmitter.
Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung des Produkts sorgfältig durch, um optimale Leistung und Sicherheit zu gewährleisten.
2. Sicherheitshinweise
- Gehörschutz: Um Gehörschäden vorzubeugen, sollten Sie Kopfhörer nicht über längere Zeiträume mit hoher Lautstärke verwenden.
- Batteriesicherheit: Verwenden Sie ausschließlich die angegebenen Batterien (2 AA-Batterien). Mischen Sie keine alten und neuen Batterien oder Batterien unterschiedlicher Typen. Entsorgen Sie gebrauchte Batterien umweltgerecht.
- Reinigung: Disconnect the transmitter from the power source before cleaning. Use a soft, dry cloth. Do not use liquid cleaners or aerosol sprays.
- Wasser und Feuchtigkeit: Kopfhörer und Sender dürfen weder Wasser noch übermäßiger Feuchtigkeit ausgesetzt werden.
- Belüftung: Ensure adequate ventilation around the transmitter. Do not block ventilation openings.
- Warnung zu Proposition 65: Dieses Produkt kann Chemikalien enthalten, von denen bekannt ist, dass sie Krebs, Geburtsfehler oder andere reproduktive Schäden verursachen.
3. Packungsinhalt
Überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:
- Audiovox RCA WHP141B Wireless Headphones
- Wireless Transmitter / Charging Base
- Netzteil
- Audio Connection Cables (e.g., RCA to 3.5mm adapter cable)
- 2 x AA-Batterien

Image: Complete package contents of the Audiovox RCA WHP141B Wireless Headphones.
4. Einrichtung
4.1 Sendereinrichtung
- Strom anschließen: Plug the AC power adapter into the DC IN port on the back of the wireless transmitter. Plug the other end into a standard electrical outlet.
- Audioquelle anschließen: Connect the audio connection cable from your audio source (e.g., TV, stereo system, computer) to the audio input jacks on the transmitter. Use the appropriate cable for your device (e.g., RCA cables or a 3.5mm adapter).
- Kanal auswählen: On the back of the transmitter, select one of the three available channels (1, 2, or 3) using the channel switch. This channel must match the channel selected on your headphones.

Image: Transmitter DC IN port and channel switch.
4.2 Headphone Setup
- Batterien einlegen: Open the battery compartment on one of the headphone earcups. Insert two AA batteries, ensuring correct polarity (+/-). Close the compartment securely.
- Einschalten: Locate the ON/OFF switch on the right earcup of the headphones. Slide the switch to the "ON" position. A power indicator light should illuminate.
- Kanal auswählen: On the right earcup, locate the channel selection switch (CH. 1, 2, 3). Slide the switch to match the channel selected on your transmitter. This ensures proper signal reception.

Image: Headphone ON/OFF switch.

Image: Headphone channel selection switch.
5. Bedienungsanleitung
5.1 Ein-/Ausschalten
- To turn on the headphones, slide the ON/OFF switch on the right earcup to the "ON" position. The power indicator light will illuminate.
- To turn off the headphones, slide the ON/OFF switch to the "OFF" position. The power indicator light will turn off.
5.2 Lautstärkeregelung
- Adjust the volume using the volume control dial or buttons located on the right earcup of the headphones.
- Start with a low volume level and gradually increase it to a comfortable listening level.
5.3 Kanalauswahl
- If you experience interference or static, try changing the channel on both the transmitter and the headphones to a different matching channel (1, 2, or 3).
5.4 Aufladen der Kopfhörer
When the headphone batteries are low, the sound quality may degrade or the headphones may stop working. To charge:
- Ensure the transmitter is powered on and connected to its AC adapter.
- Place the headphones onto the charging base, ensuring the charging contacts align. The charging indicator light on the transmitter (if present) or headphones should illuminate to indicate charging.
- Allow sufficient time for the batteries to fully charge before use.

Image: Audiovox RCA WHP141B Wireless Headphones.
6. Wartung
- Reinigung: Wipe the headphones and transmitter with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents.
- Batteriewechsel: Replace AA batteries in the headphones when they no longer hold a charge or if the power indicator does not light up. Ensure correct polarity.
- Lagerung: When not in use for extended periods, store the headphones and transmitter in a cool, dry place. Remove batteries from the headphones if storing for several months.
7. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Kein Ton über Kopfhörer | Headphones are off Niedrige oder leere Batterien Transmitter not powered Audio source not playing Falsche Kanalauswahl Lautstärke zu niedrig | Slide ON/OFF switch to ON Ersetzen oder laden Sie die Batterien auf Ensure transmitter AC adapter is plugged in Verify audio source is playing and connected Match headphone channel to transmitter channel Kopfhörerlautstärke erhöhen |
| Statisches Rauschen oder schlechte Tonqualität | Störungen durch andere Geräte Headphones too far from transmitter Falsche Kanalauswahl Low battery on headphones | Change channel on both headphones and transmitter Gehen Sie näher an den Sender heran. Ensure channels match Ersetzen oder laden Sie die Batterien auf |
| Kurze Funkreichweite | Obstructions between headphones and transmitter Interferenz Schwache Batterie | Ensure clear line of sight to transmitter Kanal wechseln Ersetzen oder laden Sie die Batterien auf |
| Kopfhörer werden nicht aufgeladen | Headphones not properly seated on base Transmitter not powered Defekte Batterien | Adjust headphones on charging base to ensure contact Check transmitter power connection Batterien ersetzen |
8. Spezifikationen
| Besonderheit | Spezifikation |
|---|---|
| Modellnummer | WHP141B |
| Konnektivitätstechnologie | RF (Radiofrequenz) |
| Drahtlose Kommunikationstechnologie | RF |
| Drahtlose Reichweite | Bis zu 150 Fuß (ca. 45 Meter) |
| Kopfhörer-Typ | Over-Ear, Full-Size |
| Lärmschutz | Schallisolierung |
| Power Source (Headphones) | 2 x AA-Batterien (im Lieferumfang enthalten) |
| Stromquelle (Sender) | Netzteil |
| Steuerungstyp | Media Control (Volume, Channel) |
| Material | Plastik |
| Farbe | Schwarz |
| Technische Daten | 10 x 6 x 7.5 Zoll (ca.) |
| Artikelgewicht | 1.89 Pfund (ca.) |
9. Garantie und Support
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Audiovox webBewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.