WELLAND 48-Zoll weißes Wandregal mit berührungsempfindlicher LED-Beleuchtung – Bedienungsanleitung

1. Wichtige Sicherheitshinweise

Bitte lesen Sie vor der Montage und Inbetriebnahme alle Anweisungen sorgfältig durch. Bewahren Sie diese Anleitung zum späteren Nachschlagen auf.

• Gewichtsbeschränkung: The maximum weight capacity for this shelf is 10 PfundUm Schäden oder Verletzungen zu vermeiden, darf diese Grenze nicht überschritten werden.
• Montage: Ensure the shelf is securely mounted to a wall stud or using appropriate drywall anchors for stability. Improper installation can lead to the shelf falling.
• Batteriesicherheit: Use only the specified battery type (3 x AA batteries per light, not included). Do not mix old and new batteries. Remove batteries if the product is not used for an extended period.
• Platzierung: Avoid placing the shelf in areas with excessive moisture or direct heat sources.

2. Packungsinhalt

Vor Beginn der Montage prüfen Sie, ob alle Komponenten vorhanden sind:

• Regal x1
• LED-Leuchten x2
• Accessory Bag (mounting hardware)
• Assembly Instruction (this manual)

Bild: Überview of the WELLAND Floating Shelf and its included components.

3. Spezifikationen

Image: Detailed dimensions of the 48-inch floating shelf.

4. Einrichtung und Installation

Follow these steps for proper installation of your floating shelf.

4.1. Bereiten Sie die Installation vor

• Benötigte Werkzeuge: You will need a drill, a level, a pencil or marker, and a screwdriver for installation.
• Standort: Choose a suitable wall location. Consider mounting into wall studs for maximum stability. If mounting into drywall, use appropriate anchors (included in the accessory bag).

4.2. Mount the Shelf

• Markierung: Hold the mounting bracket against the wall at the desired height and use a level to ensure it is straight. Mark the screw hole positions with a pencil.
• Bohren: Drill pilot holes at the marked positions. If mounting into drywall without a stud, insert the appropriate wall anchors.
• Sichere Halterung: Befestigen Sie die Montagehalterung mit den mitgelieferten Schrauben an der Wand. Achten Sie darauf, dass sie fest sitzt.
• Regal anbringen: Slide the floating shelf onto the secured mounting bracket. The streamlined design hides the support for a clean, floating appearance.

4.3. Install LED Lights

• Open Light Unit: Twist the back cover of each LED light counter-clockwise to open it.
• Batterien einlegen: Insert 3 AA batteries into each LED light unit, ensuring correct polarity.
• Sichere Lichter: Place the LED light units into the designated recesses on the underside of the shelf. Twist clockwise to secure them.

Image: Step-by-step guide for battery insertion and light installation.

5. Bedienungsanleitung (LED-Licht)

The WELLAND Floating Shelf features touch-activated LED lights for convenient illumination.

• Ein-/Ausschalten: To activate the LED light, gently touch the center of the light unit. To turn it off, touch the center again.
• Lichtleistung: The LED lights provide a gentle glow, ideal for accent lighting or reading.

6. Wartung

• Reinigung: Wipe the shelf surface with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Batteriewechsel: If the LED lights dim or stop working, replace the 3 AA batteries in each unit. Follow the installation steps in Section 4.3 to access and replace batteries.
• Inspektion: Periodically check the mounting hardware to ensure the shelf remains securely attached to the wall.

7. Fehlerbehebung

8. Garantie und Support

For any questions, concerns, or support regarding your WELLAND Floating Shelf, please contact the manufacturer directly. Specific warranty details may vary and are typically provided with your purchase documentation.

You can visit the official WELLAND store for more information and contact options: WELLAND Store