1. Einleitung
This manual provides instructions for the installation, operation, and maintenance of your AudioOrigin Moving Magnet Cartridge and Stylus. Designed for high-quality audio reproduction, this cartridge is compatible with a wide range of vintage turntables, including the specified Fisher models. It comes complete with fixing bolts and a stylus guard, offering excellent, warm sound quality.
The AudioOrigin cartridge and stylus are engineered for precise tracking and clear sound, ensuring your vinyl records are played with fidelity. Its robust design ensures durability while maintaining optimal performance.
2. Produktkomponenten
Your AudioOrigin Turntable Cartridge and Stylus package includes the following components:
- Tonabnehmer mit beweglichen Magneten
- Stylus (pre-installed)
- Spare Stylus
- Brass Mounting Bolts
- Stiftschutz
Figure 1: AudioOrigin Turntable Cartridge and Stylus with brass mounting bolts and stylus guard.
Abbildung 2: Nahaufnahme view of the AudioOrigin stylus component.
3. Einrichtung und Installation
Installation of the cartridge and stylus requires careful handling. Ensure your turntable is powered off and unplugged before beginning. Refer to your turntable's specific manual for tonearm removal and wiring details if necessary.
3.1 Installation der Kartusche
- Prepare the Turntable: Power off and unplug your turntable. Carefully remove the existing cartridge or headshell from the tonearm.
- Kabel anschließen: Gently connect the four color-coded wires from the tonearm to the corresponding pins on the new AudioOrigin cartridge. The standard color code is typically:
- Red (R): Right Channel Hot
- Green (RG): Right Channel Ground
- White (L): Left Channel Hot
- Blue (LG): Left Channel Ground
- Mount the Cartridge: Using the supplied brass mounting bolts, attach the AudioOrigin cartridge to your turntable's headshell. Tighten the bolts just enough to secure the cartridge, allowing for minor adjustments for alignment.
- Stylus Installation: The stylus is typically pre-installed. If not, carefully slide the stylus into the front of the cartridge body until it clicks into place. Ensure the stylus guard is in place during cartridge mounting to protect the needle.
- Ausrichtungs- und Nachführkraft: Once mounted, align the cartridge according to your turntable's specifications (usually using a protractor). Set the tracking force (downforce) to the recommended range of 2.5-3.5 grams. Refer to your turntable's manual for precise adjustment procedures.
3.2 Visual Guide for Stylus Replacement
For a visual demonstration of stylus replacement, please refer to the video below:
Video 1: Demonstration of record player needle (stylus) removal and installation.
Video 2: Guide for diamond needle stylus replacement.
4. Bedienungsanleitung
Once the cartridge and stylus are correctly installed and aligned, follow these steps to operate your turntable:
- Stiftschutz entfernen: Carefully remove the stylus guard from the needle. Store it in a safe place to prevent damage when not in use.
- Ortsrekord: Place your desired vinyl record on the turntable platter.
- Start Turntable: Start the turntable motor and select the correct speed (33 1/3 or 45 RPM).
- Unterer Tonarm: Gently lift the tonearm using the cueing lever (if available) and position it over the lead-in groove of the record. Slowly lower the cueing lever to allow the stylus to descend onto the record. Avoid dropping the tonearm directly onto the record.
- Enjoy Playback: The music will begin to play. Adjust the volume on your amplifier or receiver as needed.
- Wiedergabe beenden: At the end of the record, or when you wish to stop, gently lift the tonearm using the cueing lever and return it to its rest. Replace the stylus guard.
5. Wartung
Regular maintenance ensures optimal sound quality and extends the life of your stylus and records.
5.1 Reinigung der Stiftspitze
Dust and debris can accumulate on the stylus, affecting sound quality and potentially damaging records. Clean the stylus regularly:
- Use a dedicated stylus cleaning brush or a very soft, fine-bristled brush.
- Always brush gently from the back of the stylus towards the front (the direction the record plays). Never brush side-to-side or front-to-back, as this can damage the cantilever.
- For stubborn grime, a small amount of stylus cleaning fluid can be used, applied to the brush, not directly to the stylus.
5.2 Nadelwechsel
The stylus is a consumable part and will wear out over time, typically after 500-1000 hours of playback, depending on care and record condition. Replace the stylus when sound quality degrades (e.g., increased distortion, sibilance) or if visible wear or damage occurs.
- Gently grasp the old stylus assembly and pull it straight forward from the cartridge body.
- Take the new stylus (including the spare provided) and carefully align it with the cartridge body.
- Push the new stylus firmly but gently into place until it clicks securely.
- Re-check tracking force and alignment after replacing the stylus.
6. Fehlerbehebung
If you experience issues, consult this section before seeking professional assistance.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Kein Ton oder sehr leiser Ton | Falsche Verkabelung; amplifier input not selected; damaged stylus. | Check all wire connections to the cartridge and amplifier. Ensure the correct input (Phono) is selected on your amplifier. Inspect stylus for damage. |
| Verzerrter oder gedämpfter Klang | Dirty stylus; incorrect tracking force; worn stylus; improper alignment. | Clean the stylus. Verify tracking force is within 2.5-3.5 grams. Check cartridge alignment. Replace stylus if worn. |
| Seilspringen oder Springen | Incorrect tracking force; dirty or damaged record; damaged stylus; turntable not level. | Increase tracking force slightly (within recommended range). Clean record. Inspect stylus for damage. Ensure turntable is on a level surface. |
| Brummendes Geräusch | Grounding issue; proximity to electrical interference. | Ensure turntable is properly grounded to your amplifier. Move turntable away from other electronic devices. |
7. Spezifikationen
- Typ: Tonabnehmer mit beweglichen Magneten
- Frequenzgang: 20-20,000 Hz
- Kanaltrennung: > 15 dB bei 1 kHz
- Recommended Downforce: 2.5-3.5 Gramm
- ASIN: B075CS45F3
- Datum der Erstveröffentlichung: 31. August 2017
7.1 Compatible Turntable Models
This cartridge and stylus are compatible with, but not limited to, the following Fisher turntable models:
- Fisher MT30
- Fisher MT35
- Fisher MT100
- Fisher MT125
- Fisher MT273
- Fisher MT275
- Fisher MT640
- Fisher MT650
- Fisher MT720
- Fisher MT6250
- Fisher MT6330
- Fisher MT6335
- Fisher MT6410
- Fisher MT6420
- Fisher MT6421
- Fisher MT6118
- Fisher MT6455
8. Garantieinformationen
For detailed warranty information regarding your AudioOrigin Turntable Cartridge and Stylus, please refer to the manufacturer's official webDie Garantiebedingungen können je nach Website oder Produktverpackung variieren.
9. Kundendienst
Should you require further assistance, have questions about installation, operation, or maintenance, please contact AudioOrigin customer support. Visit our official webAuf dieser Webseite finden Sie Kontaktdaten und weitere Ressourcen.