JESLED 8FT LED-Lampen (Modell JND-T88FT-FA8-A2-TC-50DW-12P) Bedienungsanleitung

1. Einleitung

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your JESLED 8FT LED Bulbs. These bulbs are designed as energy-efficient replacements for traditional fluorescent tubes in various indoor settings.

2. Wichtige Sicherheitshinweise

WARNING: To prevent electric shock, always turn off power at the circuit breaker before installation or servicing.

• This product requires a ballast bypass installation. Do not attempt to install these LED tubes with an existing ballast.
• Ensure the fixture is modified to supply line voltage directly to the sockets.
• Installieren Sie keine Leuchtstofflampenamps into a fixture that has been modified for LED tubes.
• Not suitable for use with standard dimmers unless explicitly stated otherwise.
• Install this item away from radio, remote control doors, or similar devices, as it may cause electromagnetic interference (EMI).
• Always consult a qualified electrician if you are unsure about any installation steps.

3. Produktüberschreitungview

The JESLED 8FT LED Bulbs are designed for high brightness and energy efficiency, serving as direct replacements for 8-foot fluorescent tubes in various indoor settings.

Abbildung 3.1: Überview of JESLED 8FT LED Bulbs (12-pack).

Hauptmerkmale:

• Hohe Helligkeit: 6000+ lumens output for clear visibility.
• Energieeinsparung: Up to 65% reduction in electricity consumption compared to fluorescent tubes.
• Lange Lebensdauer: Engineered for 50,000+ hours of operation, reducing maintenance.
• Langlebige Konstruktion: Advanced aluminum design for heat dissipation and shatterproof build.
• Einfache Installation: Dual-end powered, ballast bypass required.
• Kompatibilität: Ideal for T8, T10, and T12 fluorescent fixtures.
• Tageslichtweiß: 5000K color temperature for natural light.

Figure 3.2: Detail of the Single Pin Fa8 Base and 8FT (93.86") length.

Figure 3.3: JESLED LED tubes feature dual-row LEDs for brighter light output compared to single-row designs.

4. Technische Daten

5. Installation Instructions (Ballast Bypass, Dual-End Powered)

These JESLED 8FT LED tubes require a ballast bypass installation. This means the existing ballast in your fluorescent fixture must be removed or bypassed, and the fixture rewired to directly supply line voltage zum lamp holders (tombstones).

Erforderliche Werkzeuge:

• Drahtschneider/Abisolierzange
• Schraubendreher
• Drahtmuttern
• Isolierband
• Bandtagder tester

Installationsschritte:

1. Strom ausschalten: Locate the circuit breaker controlling the fixture and turn off the power. Verify with a voltagPrüfen Sie vor dem Fortfahren, ob die Stromzufuhr unterbrochen ist.
2. Vorhandene Leuchtstoffröhren entfernen: Die alten Leuchtstoffröhren vorsichtig aus der Leuchte entnehmen.
3. Access the Ballast: Open the fixture to expose the wiring and the ballast.
4. Vorschaltgerät umgehen/entfernen:

   Cut off all wires connected to the ballast. You will typically have a live (black) and neutral (white) wire going into the ballast, and multiple wires (often yellow, red, blue) going from the ballast to the lamp holders (tombstones).

   

   Figure 5.1: Ballast bypass wiring diagram. Connect the live wire to one end of the LED tube and the neutral wire to the other end.

   Connect the live (hot) wire from the main power supply to the wires leading to one end of the fixture's lamp holders. Connect the neutral wire from the main power supply to the wires leading to the other end of the fixture's lamp holders. Use wire nuts to secure all connections and electrical tape for added insulation.

5. LED-Röhren installieren: Insert the JESLED 8FT LED tubes into the modified fixture. Ensure the single pins are securely seated in the lamp Inhaber.
6. Apply Warning Label: Affix the provided warning label to the fixture to indicate that it has been modified for LED lamps and no longer uses a ballast. This prevents accidental installation of fluorescent lamps in the future.
7. Strom wiederherstellen: Close the fixture and turn the power back on at the circuit breaker.

Visuelle Installationsanleitung:

6. Bedienungsanleitung

JESLED 8FT LED Bulbs are designed for simple operation once correctly installed:

• Sofort ein: These LED tubes provide instant illumination with no flickering or warm-up time.
• Nicht dimmbar: These specific models are non-dimmable. Do not attempt to use them with standard dimmer switches, as this may damage the bulbs or the dimmer.
• Optimale Leistung: For best performance, ensure the bulbs are used within their specified voltage range (120-277 Volts).

7. Wartung

JESLED LED bulbs require minimal maintenance due to their long lifespan and durable construction.

• Reinigung: Ensure power is off before cleaning. Gently wipe the tubes with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Inspektion: Periodically inspect the tubes and wiring for any signs of damage or loose connections. Address any issues promptly.
• Lebensdauer: With an average lifespan of 50,000 hours, these bulbs are designed to last over 5 years with typical use, significantly reducing the frequency of replacements.

8. Fehlerbehebung

If you encounter issues with your JESLED LED bulbs, refer to the following common problems and solutions:

9. Garantie und Support

JESLED provides a 3-year unlimited customer service warranty for these LED bulbs. If you are not satisfied with your product or encounter any issues, please contact JESLED customer support for assistance.

For support, please refer to the contact information provided with your product packaging or visit the official JESLED webWebsite.