Anderic EzWipe RR1002 Universal Cleanable TV Remote Instruction Manual

1. Einleitung

The Anderic EzWipe RR1002 is a universal remote control designed for televisions, emphasizing ease of use, durability, and hygiene. Its simplified design and cleanable surface make it suitable for various environments, including hospitality settings. This manual provides comprehensive instructions for setting up, operating, and maintaining your RR1002 remote control.

Bild 1.1: Vorderseite view of the Anderic EzWipe RR1002 remote control, showcasing its simplified button layout.

2. Packungsinhalt

Bitte überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:

• Anderic EzWipe RR1002 Universal TV Remote Control
• Bedienungsanleitung (dieses Dokument)
• Battery Cover Opening Tool

Note: 2 AAA batteries are required and are not included.

3. Einlegen der Batterie

To install batteries in your Anderic EzWipe RR1002 remote control:

1. Suchen Sie das Batteriefach auf der Rückseite der Fernbedienung.
2. Use the provided battery cover opening tool or a small flat object to gently pry open the battery compartment cover.
3. Legen Sie zwei (2) AAA-Batterien ein und achten Sie darauf, dass die positiven (+) und negativen (-) Anschlüsse mit den Markierungen im Inneren des Batteriefachs übereinstimmen.
4. Bringen Sie die Abdeckung des Batteriefachs wieder an und achten Sie darauf, dass sie hörbar einrastet.

Abbildung 3.1: Rückseite view of the remote, indicating the battery compartment location.

4. Einrichtung und Programmierung

The RR1002 remote offers multiple methods for programming to your television.

4.1. Pre-programmed Compatibility

The RR1002 remote is pre-programmed to work with most Samsung TVs directly out of the box. If you have a Samsung TV, try operating it with the remote before proceeding with further programming steps.

4.2. Easy 2-Step Programming

For other TV brands, use the easy 2-step programming method:

1. Rufen Sie den Setup-Modus auf: Halten Sie gleichzeitig die AUFSTELLEN und die LEISTUNG button for approximately three seconds until the red indicator light on the remote illuminates and stays lit. This indicates the remote is in programming mode.
2. Enter TV Code: Refer to the extensive code database provided in the full operating manual (included with your purchase) to find the 3-digit code for your TV brand. Enter this code using the number buttons on the remote. The indicator light will flash and then turn off if the code is accepted.
3. Fernbedienung testen: Point the remote at your TV and test the basic functions (Power, Volume, Channel). If the TV responds, programming is complete. If not, repeat the steps with the next code listed for your TV brand.

Important: The setup mode requires two buttons to be pressed simultaneously to prevent accidental de-programming by users.

4.3. Learning Ability

The RR1002 remote has a learning function, allowing it to learn commands from your original TV remote. This is useful for functions not covered by the pre-programmed codes or for specific TV models.

1. Prepare Remotes: Place the RR1002 remote and your original TV remote head-to-head on a flat surface, ensuring their infrared emitters are aligned and close to each other (within 1-2 inches).
2. Lernmodus aufrufen: Halten Sie gleichzeitig die AUFSTELLEN und die EINGANG button for approximately three seconds until the red indicator light on the RR1002 illuminates and stays lit.
3. Select Button to Learn: On the RR1002, press the button you wish to program (e.g., LEISTUNGDie Kontrollleuchte beginnt langsam zu blinken.
4. Befehl senden: On your original TV remote, press and hold the corresponding button (e.g., Power) until the indicator light on the RR1002 flashes rapidly three times and then stays lit. This confirms the command has been learned.
5. Repeat or Exit: Repeat steps 3 and 4 for any other buttons you wish to program. To exit learning mode, press the AUFSTELLEN button once. The indicator light will turn off.

Note: If the indicator light turns off during the learning process, it means the remote timed out. Re-enter learning mode and try again.

5. Bedienungsanleitung

The Anderic EzWipe RR1002 remote is designed for simplified TV control. Below are the functions of its buttons:

Image 5.1: Button layout of the RR1002 remote.

• LEISTUNG: Schaltet den Fernseher ein oder aus.
• EINGANG: Cycles through available video inputs (e.g., HDMI 1, HDMI 2, AV).
• VOL+ / VOL-: Erhöht oder verringert die Lautstärke des Fernsehers.
• CH+ / CH-: Schaltet den Fernsehkanal hoch oder runter.
• STUMM: Schaltet den Ton des Fernsehers stumm oder hebt die Stummschaltung auf.
• 0-9 (Zifferntasten): Kanalnummern direkt eingeben.
• EINGEBEN: Confirms channel selection after entering numbers.
• CC (Untertitelung): Schaltet Untertitel ein oder aus.
• PREV.CH (Previous Channel): Kehrt zur vorherigen viewed-Kanal.
• -/-- (Dash): Used for entering digital sub-channels (e.g., 7-1).
• SCHLAFEN: Activates the TV's sleep timer function (if supported by the TV).

This remote is designed to be simple and does not include buttons for complex TV menus, DVD players, cable boxes, or satellite receivers. Its primary function is basic TV control.

6. Wartung und Reinigung

The Anderic EzWipe RR1002 remote features a flat membrane surface designed for easy cleaning and is waterproof.

• Reinigung: To clean the remote, simply wipe its surface with a damp cloth, disinfectant wipe, or mild cleaning solution. Ensure the battery compartment cover is securely closed before cleaning.
• Wasserdichte Eigenschaft: The remote is designed to be waterproof and can be fully submerged in water for cleaning purposes. After submersion, ensure it is thoroughly dried before use.
• Batteriewechsel: Replace batteries when the remote's response becomes sluggish or the indicator light does not illuminate. Always use fresh AAA batteries.
• Lagerung: Bewahren Sie die Fernbedienung bei längerem Nichtgebrauch an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.

7. Fehlerbehebung

8. Spezifikationen

• Modell: RR1002
• Marke: Anderich
• Produktabmessungen: 6.5 x 2 x 1.25 Zoll (ungefähr)
• Artikelgewicht: 2.4 Unzen (ohne Batterien)
• Batterien: 2 x AAA (nicht enthalten)
• Konnektivitätstechnologie: Infrarot (IR)
• Kompatible Geräte: Fernsehen
• Maximale Anzahl unterstützter Geräte: 1 (Fernseher)
• Besondere Merkmale: Easy Wipe Surface, Universal, Waterproof, Learning Ability

Abbildung 8.1: Seitenansichtfile of the RR1002 remote.

9. Garantie und Support

For technical support, programming assistance, or warranty inquiries regarding your Anderic EzWipe RR1002 remote control, please contact Anderic directly:

• WebWebsite: www.Anderic.com
• Telefon: 1-855-573-6683

Please have your model number (RR1002) and any relevant purchase information ready when contacting support.