Behringer P2 Ultra-Compact Personal In-Ear Monitor Amplifier-Benutzerhandbuch

Einführung

The Behringer P2 Ultra-Compact Personal In-Ear Monitor Amplifier is designed for musicians who require personal monitoring in various performance and studio environments. This device provides convenient control over your in-ear monitor mix directly at your fingertips, offering a powerful, lightweight, and user-friendly solution.

Produkteigenschaften

• Ultrakompaktes Design: Lightweight and portable, ideal for musicians on stage oder im Studio.
• Personal Control: Allows musicians to control their monitor volume directly.
• Versatile Headphone Output: Features a standard 3.5 mm (1/8") stereo output jack for headphones, earbuds, or custom in-ear monitors.
• Secure Input Connector: XLR / TRS combo input connector with a locking mechanism to prevent accidental disconnections.
• Mono/Stereo-Schalter: Internal switch to select between mono for mixer aux sends or stereo for headphone outputs.
• High-Quality Volume Control: Detented level control with an on/off switch for precise volume adjustment and long-term durability.
• Integrierter Gürtelclip: Convenient built-in belt clip for easy attachment to clothing or instrument straps.

Aufstellen

1. Einlegen der Batterie

Das P2 amplifier operates on a 9V battery (not included). To install or replace the battery:

1. Locate the battery compartment release button on the side of the unit.
2. Press the button and slide the outer casing downwards to reveal the battery compartment.
3. Legen Sie eine neue 9V-Batterie ein und achten Sie dabei auf die richtige Polarität.
4. Slide the outer casing back into place until it clicks securely.

Image: The Behringer P2 with its outer casing removed, showing the internal battery compartment and the mono/stereo switch.

2. Anschluss an eine Audioquelle

The P2 features a locking XLR / TRS combo input. This allows for connection to various audio sources such as a mixer's auxiliary send or a headphone output.

1. Connect your audio source (e.g., mixer output) to the XLR / TRS combo input at the bottom of the P2. The locking mechanism ensures a secure connection. To release, press the small tab next to the connector.
2. For stereo sources, use an XLR-to-TRS or TRS-to-TRS (male to male) cable.

Image: Close-up of the locking XLR / TRS combo input on the Behringer P2.

3. Kopfhörer/IEMs anschließen

Connect your headphones, earbuds, or in-ear monitors to the 3.5 mm (1/8") stereo output jack located at the top of the P2 unit.

Bild: Oben view of the Behringer P2, highlighting the 3.5 mm headphone output jack.

Bedienungsanleitung

1. Ein-/Ausschalten und Lautstärkeregelung

The P2 features a combined power on/off switch and volume control knob.

1. To power on the unit, rotate the top-mounted volume knob clockwise until you hear a click. The battery indicator LED will illuminate.
2. Durch Weiterdrehen im Uhrzeigersinn wird die Lautstärke erhöht.
3. Zum Ausschalten den Drehknopf gegen den Uhrzeigersinn drehen, bis er einrastet.

Image: The top of the Behringer P2, showing the volume control knob and battery indicator light.

2. Mono/Stereo Mode Selection

An internal switch allows you to select between mono and stereo operation, depending on your audio source.

1. To access the switch, slide open the outer casing as described in the "Battery Installation" section.
2. Locate the small switch labeled "STEREO / MONO" inside the unit.
3. Set the switch to "MONO" if using a single mono source (e.g., a mixer's aux send).
4. Set the switch to "STEREO" if using a stereo source (e.g., a headphone output from a device).
5. Close the outer casing securely after making your selection.

3. Verwendung des Gürtelclips

The integrated belt clip allows for convenient placement of the P2 during use.

• Attach the P2 to your waistband, belt, or instrument strap for easy access to volume control.

Abbildung: Seite view of the Behringer P2, illustrating the integrated belt clip.

Wartung

• Reinigung: Reinigen Sie die Außenseite des Geräts mit einem weichen, trockenen Tuch. Vermeiden Sie die Verwendung von Scheuermitteln oder Lösungsmitteln.
• Batteriepflege: Remove the 9V battery if the unit will not be used for an extended period to prevent leakage.
• Lagerung: Store the P2 in a cool, dry place away from direct sunlight and extreme temperatures.

Fehlerbehebung

• Kein Ton:
  • Ensure the unit is powered on and the volume knob is turned up.
  • Check the battery indicator; replace the 9V battery if it's dim or off.
  • Verify all audio cables are securely connected to both the P2 and the audio source.
  • Prüfen Sie, ob die Audioquelle aktiv ist und ein Signal sendet.
  • Check the Mono/Stereo switch setting matches your audio source.
• Verzerrter Klang:
  • Reduce the volume on the P2 and/or the audio source.
  • Ensure the audio source signal is not too strong for the P2 input.
  • Check the audio cables for damage.
• Intermittierender Ton:
  • Prüfen Sie alle Kabelverbindungen auf festen Sitz.
  • Ersetzen Sie die Batterie.
  • Inspect cables for damage or wear.

Technische Daten

Offizielles Produktvideo

Garantie und Support

For warranty information, please refer to the official Behringer webWebsite: http://www.music-group.com/warranty.aspx

Manufacturer Contact Information: Behringer