1. Einleitung
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your BERNSTEIN EX412 U-Shape Shower Enclosure. Please read all instructions carefully before beginning installation or use to ensure proper function and safety. Keep this manual for future reference.
2. Sicherheitshinweise
- Tragen Sie während der Installation stets geeignete persönliche Schutzausrüstung (PSA), einschließlich Schutzbrille und Handschuhe.
- Handle glass panels with extreme care. Tempered safety glass, while strong, can shatter if struck at the edges or corners.
- Ensure the installation area is level and structurally sound to support the weight of the shower enclosure and its users.
- Schrauben nicht zu fest anziehen, da dies Bauteile oder Glas beschädigen kann.
- Halten Sie Kinder und Haustiere vom Installationsbereich fern.
- Wenn Sie sich bei irgendeinem Teil des Installationsprozesses unsicher sind, konsultieren Sie einen qualifizierten Fachmann.
3. Packungsinhalt
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact BERNSTEIN customer service.
- U-Shape Shower Enclosure Glass Panels (8mm tempered safety glass with nano-coating)
- Duschwanne
- High-quality chrome-plated brass hinges
- Wall mounting profiles and brackets
- Stainless steel door handle
- Adjustable stainless steel support bar
- Stainless steel towel rail
- Assembly materials (screws, seals, etc.)
4. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Modell | EX412 |
| Abmessungen (L x B x H) | 120 x 90 x 195 cm (195D x 195H cm for product dimensions) |
| Glasdicke | 8 mm tempered safety glass (ESG according to DIN-EN12150) |
| Glasbeschichtung | Nano-coating for easy cleaning |
| Türstil | Frameless pivot doors |
| Material | Acrylic (shower tray), Tempered Glass, Stainless Steel, Brass (hinges) |
| Beenden | Glossy (chrome-plated fittings) |
| Installationstyp | Wandmontage |
| Im Lieferumfang enthaltene Komponenten | Shower enclosure, shower tray, towel rail, mounting hardware |
5. Einrichtung und Installation
The BERNSTEIN EX412 shower enclosure is designed for straightforward assembly with the included mounting materials. Follow these general steps, referring to the detailed technical drawing for precise measurements and component placement.
5.1 Prüfungen vor der Installation
- Ensure the bathroom floor and walls are prepared, waterproofed, and level.
- Confirm that the wall where the enclosure will be mounted is structurally sound.
- Unpack all components and check against the package contents list.
5.2 Installationsschritte (Allgemein)view)
- Position the Shower Tray: Place the included shower tray in the desired location, ensuring it is level and properly connected to the drainage system.
- Mount Wall Profiles: Sichern Sie die Wandmontagevorrichtungfiles to the prepared walls using the provided screws and wall plugs. Ensure they are plumb and at the correct height.
- Festverglaste Scheiben montieren: Carefully place the fixed glass panels into the wall profiles and secure them. Use the adjustable stainless steel support bar to provide additional stability to the fixed panels.
- Scharniere anbringen: Mount the high-quality chrome-plated brass hinges to the fixed glass panels and the wall, as indicated in the technical drawing.
- Türverkleidungen montieren: Attach the frameless pivot door panels to the hinges. Adjust as necessary to ensure smooth operation and a tight seal when closed.
- Install Door Handle and Towel Rail: Secure the stainless steel door handle and the stainless steel towel rail to the designated glass panels.
- Versiegeln und Fertigstellen: Apply silicone sealant to all external joints between the glass, wall profiles, and shower tray to ensure watertightness. Allow adequate drying time before use.
5.3 Visual Aids for Installation
6. Wartung und Reinigung
Regular cleaning and maintenance will ensure the longevity and appearance of your BERNSTEIN EX412 shower enclosure.
6.1 Glasreinigung
- The 8mm nano-coated safety glass is designed to repel water and reduce limescale buildup.
- After each use, wipe down the glass panels with a soft cloth or squeegee to remove water droplets.
- For deeper cleaning, use a mild, non-abrasive glass cleaner and a soft cloth. Avoid harsh chemicals, abrasive sponges, or scouring powders, as these can damage the nano-coating and glass surface.
- Nach der Reinigung gründlich mit klarem Wasser abspülen.
6.2 Frame and Hardware Cleaning
- Clean chrome-plated brass hinges, stainless steel handles, and support bars with a soft, damp Tuch und milder Seife.
- Do not use abrasive cleaners, acidic solutions, or steel wool, as these can scratch or corrode the metal finishes.
- Dry all metal parts thoroughly after cleaning to prevent water spots.
6.3 Dichtungswartung
- Regularly inspect the silicone seals for any signs of wear, cracking, or mold.
- Clean seals with a mild anti-mold cleaner if necessary.
- If seals are damaged, they should be replaced promptly to prevent leaks.
7. Fehlerbehebung
In diesem Abschnitt werden häufige Probleme behandelt, die bei Ihrer Duschkabine auftreten können.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Wasserleck | Improper sealing, damaged seals, incorrect door alignment | Check silicone seals and reapply if necessary. Inspect door seals for damage and replace if needed. Adjust door alignment. |
| Tür schließt nicht richtig | Hinge misalignment, obstruction, worn hinges | Adjust hinges. Check for any obstructions. If hinges are worn, contact support for replacements. |
| Das Glas erscheint trüb oder fleckig. | Limescale buildup, soap scum, improper cleaning agents | Use appropriate glass cleaner for nano-coated surfaces. Clean regularly. Avoid abrasive cleaners. |
8. Garantie und Support
BERNSTEIN products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided at the time of purchase or visit the official BERNSTEIN website. If you require technical assistance, replacement parts, or have any questions not covered in this manual, please contact BERNSTEIN customer support.
Hersteller: BERNSTEIN
Kontaktinformationen: Please refer to your purchase documentation or the BERNSTEIN official webDie aktuellsten Kontaktdaten finden Sie auf der Website.