1. Produktüberschreitungview
The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.
Hauptmerkmale:
- Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
- Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
- Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
- Schnittleistung: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
- Sicherheitsschutz: A protective guard for the cutting disc ensures user safety from chips and dust.
2. Sicherheitshinweise
Lesen und verstehen Sie stets alle Sicherheitshinweise, Anweisungen, Abbildungen und technischen Daten, die diesem Elektrowerkzeug beiliegen. Die Nichtbeachtung der unten aufgeführten Anweisungen kann zu Stromschlag, Brand und/oder schweren Verletzungen führen.
Allgemeine Sicherheitshinweise:
- Tragen Sie geeignete persönliche Schutzausrüstung (PSA), einschließlich Schutzbrille, Gehörschutz und Handschuhe.
- Stellen Sie sicher, dass der Arbeitsbereich sauber, gut beleuchtet und frei von Hindernissen ist.
- Halten Sie Kinder und Unbeteiligte fern, während Sie das Werkzeug bedienen.
- Never operate the tool if the power cord or plug is damaged.
- Always disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
- Verwenden Sie die richtige Klinge für das zu schneidende Material.
- Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.
3. Komponenten vorbeiview
Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:
- Cutting Table (Stainless Steel)
- Diamond Cutting Disc (180 mm diameter)
- Motoreinheit
- Wasserreservoir
- Cutting Guide with Scale
- Angle Stop (-45° to +45°)
- Klingenschutz
- Ein/Aus-Schalter
- Tragegriff
Abbildung 1: Überview of the Einhell TC-TC 800 Tile Cutter with its main parts.
4. Einrichtung
Before operating the tile cutter, ensure proper setup for safety and optimal performance.
4.1 Auspacken und Prüfen
- Entnehmen Sie vorsichtig alle Komponenten aus der Verpackung.
- Inspect the tool for any signs of damage during transit. Do not operate if damaged.
- Stellen Sie sicher, dass alle aufgeführten Komponenten vorhanden sind.
4.2 Befüllen des Wasserreservoirs
The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.
- Locate the water reservoir beneath the cutting table.
- Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
- Kontrollieren Sie regelmäßig während des Betriebs den Wasserstand und füllen Sie bei Bedarf Wasser nach.
Figure 2: Filling the water reservoir for wet cutting.
4.3 Adjusting the Cutting Guide and Angle Stop
For accurate cuts, adjust the cutting guide and angle stop as required.
- The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
- For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.
Figure 3: Adjustable angle stop for miter cuts.
5. Bedienungsanleitung
Follow these steps for safe and effective tile cutting.
5.1 Ein-/Ausschalten
- Connect the tile cutter to a suitable power outlet (240 Volts).
- To turn on, press the green 'ON' button.
- To turn off, press the red 'OFF' button.
Figure 4: Power switch for turning the machine on and off.
5.2 Einen Schnitt machen
- Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
- Ensure the water pump is active and water is flowing to the blade.
- Turn on the tile cutter.
- Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
- Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.
Figure 5: Demonstrating a tile being cut with the machine.
5.3 Offizielles Produktvideo: So verwenden Sie es
Video 1: This video demonstrates the basic operation and usage of a tile cutter, including setup and cutting techniques.
6. Wartung
Regular maintenance ensures the longevity and performance of your tile cutter.
6.1 Reinigung des Wasserreservoirs
After each use, clean the water reservoir to prevent buildup of tile dust and debris.
- Trennen Sie die Stromversorgung.
- Remove the cutting table or access panel to reach the reservoir.
- Empty the dirty water and thoroughly clean the reservoir with fresh water.
- Bauen Sie die Komponenten wieder zusammen.
6.2 Klingenwechsel
Replace the diamond cutting disc when it becomes dull or damaged.
- Stellen Sie sicher, dass das Gerät vom Stromnetz getrennt ist.
- Use the provided tool to loosen the blade retaining nut.
- Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
- Die Sicherungsmutter fest anziehen.
7. Fehlerbehebung
This section addresses common issues you might encounter with your tile cutter.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Poor cut quality (chipping, uneven edges) | Dull or incorrect blade; insufficient water cooling; pushing too fast. | Replace blade with a suitable diamond disc; ensure water reservoir is full and pump is working; reduce feeding speed. |
| Water overflow from table | Water channels blocked; reservoir too full; uneven surface. | Clean water channels; do not overfill reservoir; ensure the machine is on a level surface. |
| Maschine startet nicht | Keine Stromversorgung; defekter Schalter; Motorproblem. | Check power connection and circuit breaker; test the power outlet; contact customer support if switch or motor is faulty. |
| Rusted screws/components | Lack of proper drying/maintenance after wet use. | Regularly clean and dry all metal components after use. Apply a rust preventative lubricant (e.g., WD-40) to screws and moving parts. |
8. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Marke | Einhell |
| Modellnummer | 4301185 |
| Leistung | 800 Watt |
| Bandtage | 240 Volt |
| Geschwindigkeit | 2950 U/min |
| Diamond Cutting Disc Diameter | 180 mm |
| Max. Schnitthöhe (90°) | 34 mm |
| Max. Schnitthöhe (45°) | 14 mm |
| Angle of Cut | 45 Grad |
| Tischabmessungen (L x B) | 39.6 cm x 38.5 cm |
| Produktabmessungen (L x B x H) | 39.6l. x 38.5an. x 25.5al. Zentimeter |
| Produktgewicht | 9.1 Kilogramm |
| Stromquelle | Elektrisch mit Kabel |
| Besondere Merkmale | Adjustable angle stop, parallel stop with scale |
9. Garantie und Support
9.1 Garantieinformationen
This Einhell product comes with a 2 Jahr eingeschränkte GarantieBitte bewahren Sie Ihren Kaufbeleg für eventuelle Garantieansprüche auf.
9.2 Kundendienst
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webDie aktuellsten Kontaktinformationen finden Sie auf unserer Website oder auf Ihrer Produktverpackung.