MOXA EDS-G512E-8PoE-4GSFP-T 12-Port Full Gigabit Managed Ethernet Switch User Manual

Einführung

This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of the MOXA EDS-G512E-8PoE-4GSFP-T 12-Port Full Gigabit Managed Ethernet Switch. This device is designed for industrial networking applications, offering 8 10/100/1000BaseT PoE/PoE+ ports and 4 100/1000BaseSFP slots, capable of operating in harsh environments from -40 to 75°C.

Bitte lesen Sie diese Bedienungsanleitung sorgfältig durch, bevor Sie das Gerät in Betrieb nehmen, um eine ordnungsgemäße Funktion und Sicherheit zu gewährleisten.

Packungsinhalt

• MOXA EDS-G512E-8PoE-4GSFP-T Ethernet Switch
• Kurzanleitung zur Installation
• Garantiekarte
• Montagesatz (falls zutreffend)

Verify all items are present and undamaged. Contact your vendor if any items are missing or damaged.

Aufstellen

1. Physische Installation

The EDS-G512E-8PoE-4GSFP-T switch is designed for DIN-rail or wall mounting. Ensure the installation location provides adequate ventilation and is within the specified operating temperature range (-40 to 75°C).

Abbildung 1: Vorderseite view of the MOXA EDS-G512E-8PoE-4GSFP-T Ethernet Switch, showing the 8 PoE ports and 4 SFP slots.

2. Stromanschluss

Connect a 48 VDC power source to the terminal block on the switch. Ensure correct polarity. The switch supports redundant power inputs for enhanced reliability. Refer to the Quick Installation Guide for detailed wiring diagrams.

• Eingangslautstärketage: 48 V Gleichstrom
• Redundanz: Dual power inputs

3. Netzwerkverbindung

Connect Ethernet cables to the 10/100/1000BaseT PoE/PoE+ ports for standard network devices and PoE-powered devices. Insert SFP modules into the 100/1000BaseSFP slots for fiber optic connections. Ensure SFP modules are compatible with the switch and your fiber infrastructure.

• PoE-Ports: 8 x 10/100/1000BaseT (PoE/PoE+)
• SFP-Steckplätze: 4 x 100/1000BaseSFP

Betrieb

1. Einschalten

Once power is connected, the switch will automatically power on. Observe the power LED indicators to confirm proper power supply.

2. LED-Anzeigen

The switch features various LED indicators to display its status and port activity:

• PWR1/PWR2: Indicates power status for input 1 and 2. (Green: Power OK, Off: No Power)
• FEHLER: Indicates system fault. (Red: Fault detected, Off: No fault)
• MSTR/CPLR: Indicates redundant ring status.
• Port LEDs (Link/Act): Indicates link status and data activity for each port. (Green: Link established, Blinking Green: Data activity, Off: No link)
• PoE-LEDs: Indicates PoE power status for PoE ports. (Green: PoE power supplied, Off: No PoE power)

3. Netzwerkmanagement

The EDS-G512E-8PoE-4GSFP-T is a managed switch. It can be configured and monitored via a web-based interface, Telnet/SSH, or SNMP. Refer to the product's software manual for detailed instructions on accessing and configuring the management interface.

• Standard-IP-Adresse: Consult the Quick Installation Guide or product documentation.
• Standard-Benutzername/Passwort: Consult the Quick Installation Guide or product documentation.

Wartung

1. Reinigung

Reinigen Sie die Außenseite des Schalters regelmäßig mit einem weichen, trockenen Tuch. Verwenden Sie keine flüssigen oder Aerosolreiniger. Stellen Sie sicher, dass das Gerät vor der Reinigung ausgeschaltet ist.

2. Firmware-Updates

Überprüfen Sie regelmäßig die Herstellerangaben. website for firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements. Follow the instructions provided with the firmware package carefully.

3. Umweltaspekte

Ensure the operating environment remains within the specified temperature and humidity ranges to prevent damage and ensure optimal performance.

Fehlerbehebung

1. Kein Strom

• Check power cable connections to the switch and power source.
• Verify the power source is active and providing the correct voltage (48 V Gleichstrom).
• Check the PWR1/PWR2 LEDs on the switch.

2. Keine Netzwerkverbindung

• Ensure Ethernet cables are securely connected to both the switch and the network device.
• Check the Link/Act LEDs for the respective port. A solid green indicates a link, blinking indicates activity.
• Verify network settings on connected devices.

3. PoE Device Not Powering On

• Stellen Sie sicher, dass das angeschlossene Gerät PoE-kompatibel ist.
• Check the PoE LED for the specific port. A solid green indicates PoE power is being supplied.
• Verify the total power budget of the switch is not exceeded.

4. System Fault (FAULT LED is Red)

If the FAULT LED is red, consult the product's software manual or contact technical support for advanced diagnostics.

Technische Daten

Garantie und Support

Garantieinformationen

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in the package or visit the official Moxa webAuf der Webseite finden Sie die detaillierten Garantiebedingungen.

Technische Unterstützung

For technical assistance, product documentation, or software downloads, please visit the official Moxa support website. You may also contact Moxa customer service directly for further assistance.

Moxa Official WebWebsite: www.moxa.com