Feit Electric BR40 Dimmable LED Floodlight User Manual

Einführung

Thank you for choosing the Feit Electric BR40 Dimmable LED Floodlight. This energy-efficient LED bulb is designed to replace traditional 75-watt incandescent floodlights, consuming only 11.8 watts while providing 1065 lumens of soft white 2700K light. It is suitable for various indoor applications, including track lighting and recessed fixtures, offering a wide 110-degree beam spread. With a lifespan of up to 15,000 hours, this ENERGY STAR qualified bulb is built for long-lasting performance and significant energy savings.

Bild: Vorderseite view of the Feit Electric BR40 Dimmable LED Floodlight 2-pack packaging, highlighting its LED, dimmable, flood, 1065 lumens, 11.8 watts, 15,000 life hours, and 75W replacement features.

Sicherheitshinweise

WARNUNG:

• Dieses Gerät entspricht Teil 15 der FCC-Bestimmungen. Der Betrieb unterliegt den folgenden beiden Bedingungen: (1) Dieses Gerät darf keine schädlichen Störungen verursachen und (2) dieses Gerät muss alle empfangenen Störungen akzeptieren, einschließlich Störungen, die einen unerwünschten Betrieb verursachen können.
• This equipment has been tested and found to comply with the limits for a Class B digital device. It generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications.
• Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.

VORSICHT:

• Use only on 120 volt, 60Hz circuits.
• Geeignet für damp Standorte.
• Minimale Betriebstemperatur: -25°C (-13°F).
• Dieses Gerät ist nicht für die Verwendung mit Notausgangsvorrichtungen oder Notbeleuchtungen vorgesehen.
• Lamp may not be compatible with all dimmers. For dimmer compatibility information, visit www.feit.com or call 1-866-329-BULB.
• When installing or replacing, ensure that power is switched off at the circuit breaker before connecting or disconnecting to the fixture.

Abbildung: Rückseite view of the Feit Electric BR40 Dimmable LED Floodlight packaging, showing detailed specifications, warranty information, and safety warnings.

Setup und Installation

1. Ausschalten: Before beginning installation, ensure the power to the light fixture is switched off at the circuit breaker to prevent electrical shock.
2. Alte Glühbirne entfernen: Carefully unscrew and remove the existing bulb from the fixture. Allow the old bulb to cool if it has been recently in use.
3. Neue LED-Lampe einbauen: Screw the Feit Electric BR40 Dimmable LED Floodlight into the standard E26 medium screw base socket until it is finger-tight. Do not overtighten.
4. Strom wiederherstellen: Sobald die Glühbirne sicher installiert ist, schalten Sie die Stromversorgung am Sicherungsautomaten wieder ein.
5. Anwendung: This BR40 floodlight is designed for track lighting and recessed applications, providing a wide beam of light.

Abbildung: Seite view of the Feit Electric BR40 Dimmable LED Floodlight packaging, illustrating its wide light distribution and suitability for track and recessed applications.

Bedienungsanleitung

The Feit Electric BR40 LED Floodlight is designed for simple operation in compatible fixtures.

• Standardbetrieb: Sobald die Glühbirne installiert und die Stromversorgung wiederhergestellt ist, leuchtet sie auf, wenn der Lichtschalter eingeschaltet wird.
• Dimmbare Funktionalität: This LED bulb is dimmable. For optimal performance and to avoid flickering or buzzing, use with LED-compatible dimmer switches. If you experience issues with your current dimmer, consult www.feit.com for a list of compatible dimmers or contact customer support.
• Verwendung im Innenbereich: This bulb is intended for indoor use in dry or damp Standorte.

Wartung

Feit Electric LED bulbs require minimal maintenance due to their long lifespan and durable design.

• Reinigung: Vor der Reinigung unbedingt den Strom abschalten. Die Glühbirne mit einem weichen, trockenen Tuch abwischen. Keine flüssigen Reiniger oder Scheuermittel verwenden.
• Ersatz: Replace the bulb only after it has cooled down completely.
• Entsorgung: LED-Lampen sind gemäß den örtlichen Vorschriften für Elektronikschrott zu entsorgen.

Fehlerbehebung

If you encounter issues with your Feit Electric BR40 LED Floodlight, consider the following:

• Glühbirne leuchtet nicht:
  1. Ensure the bulb is screwed in securely into the socket.
  2. Check if the power switch is on and the circuit breaker has not tripped.
  3. Testen Sie die Glühbirne in einer anderen, nachweislich funktionierenden Fassung.
• Flackern oder Summen:
  1. This often indicates incompatibility with the dimmer switch. Ensure you are using an LED-compatible dimmer.
  2. Besuchen www.feit.com for a list of recommended dimmers or contact customer support.
• Radio or TV Interference:
  1. If the bulb causes interference, try reorienting or relocating the receiving antenna.
  2. Increase the separation between the light fixture and the affected receiver.
  3. Connect the light fixture to an outlet on a different circuit from the receiver.
  4. Consult a dealer or an experienced radio/TV technician for further assistance.

Technische Daten

Garantie und Support

Garantie: This Feit Electric LED lamp comes with a 5-year, free replacement warranty. If the product fails or you are not satisfied with its performance, please contact Feit Electric directly. This replacement is the sole remedy available, and liability for incidental or consequential damage is expressly excluded.

Kontaktinformationen:

• WebWebsite: www.feit.com
• E-Mail: info@feit.com
• Gebührenfreie Nummer: 1-866-329-BULB (1-866-329-2852)

Hersteller:
Feit Electric Company
Pico Rivera, CA 90660
In China hergestellt