TSL Platinum Professional Level 8 Channel NVR – 4K User Manual

1. Einleitung

This manual provides instructions for the installation, operation, and maintenance of your TSL Platinum Professional Level 8 Channel NVR (Network Video Recorder), Model LTN8708Q P8. This NVR supports up to 8 channels of IP camera input, with resolutions up to 8 Megapixels, and utilizes H.265/H.265+/H.264/H.264 Zip+/MPEG4 video formats for efficient storage and high-quality video. Please read this manual thoroughly before operating the device to ensure proper use and to prevent damage.

Packungsinhalt

Bitte prüfen Sie, ob alle unten aufgeführten Artikel in Ihrem Paket enthalten sind. Sollten Artikel fehlen oder beschädigt sein, kontaktieren Sie bitte Ihren Händler.

• TSL Platinum Professional Level 8 Channel NVR Unit
• Netzteil
• USB-Maus
• Fernbedienung
• SATA Cables (for hard drive connection)
• Mounting Screws (for hard drive)
• Kurzanleitung

Abbildung 1: NVR Package Contents. This image displays the power adapter, remote control, SATA data and power cables, and mounting screws that are typically included with the NVR unit.

2. Sicherheitshinweise

Bitte beachten Sie die folgenden Sicherheitsvorkehrungen, um Verletzungen oder Schäden am Gerät zu vermeiden:

• Stellen Sie sicher, dass die Stromversorgungslautstärketage is correct before connecting the NVR.
• Do not expose the NVR to water or moisture.
• Vermeiden Sie es, den NVR direkter Sonneneinstrahlung oder der Nähe von Wärmequellen auszusetzen.
• Install the NVR in a well-ventilated area to prevent overheating.
• Öffnen Sie den NVR nicht.asing. Alle Wartungsarbeiten sind qualifiziertem Personal zu überlassen.
• Verwenden Sie nur vom Hersteller angegebenes Zubehör.

3. Produktüberschreitungview

NVR Front and Rear Panels

Abbildung 2: NVR Front and Rear Panels. The top image shows the front panel with power, status, and Tx/Rx indicators, along with control buttons and a USB port. The bottom image displays the rear panel with PoE ports, audio in/out, LAN, HDMI, VGA, and power input.

Anzeigen und Bedienelemente auf der Vorderseite:

• LEISTUNG: Betriebsanzeige.
• STATUS: Systemstatusanzeige.
• Tx/Rx: Data transmission/reception indicator.
• Bedientasten: For menu navigation and system control.
• USB-Anschluss: For mouse or USB storage device connection.

Schnittstellen auf der Rückseite:

• PoE Ports (8 channels): Connect IP cameras directly for power and data.
• AUDIO EIN/AUS: Für externe Audiogeräte.
• LAN-Anschluss: Connect to your network router/switch.
• HDMI-Ausgang: Connect to a monitor for high-resolution video output (up to 4K).
• VGA-Ausgang: Connect to a monitor for video output (up to 1080p).
• Stromaufnahme (48V): Schließen Sie das mitgelieferte Netzteil an.
• Stromschalter: To turn the NVR on/off.

Hauptmerkmale

• 8 channel PoE IP camera input, supporting cameras up to 8MP with a maximum incoming bandwidth of 80Mbps.
• H.265+ / H.265 / H.264+ / H.264 video formats for efficient compression.
• 2x SATA interfaces for hard drives (hard drives are not included).
• HDMI / VGA simultaneous output. HDMI output up to 4K@30Hz, VGA output up to 1080p@60Hz.
• Live unterstützen view, storage, and playback of connected cameras.

4. Einrichtung

4.1 Festplatteninstallation (optional)

The NVR requires a hard drive for video recording. Hard drives are not included and must be purchased separately. The NVR supports up to two SATA hard drives.

1. Schrauben Sie die obere Abdeckung des NVR ab und entfernen Sie.
2. Connect the SATA data cable and power cable to the hard drive and the corresponding ports on the NVR motherboard.
3. Befestigen Sie die Festplatte mit den mitgelieferten Schrauben am NVR-Gehäuse.
4. Bringen Sie die obere Abdeckung wieder an und befestigen Sie sie mit Schrauben.

4.2 Kameras anschließen

Connect your IP cameras to the PoE ports on the rear panel of the NVR using Ethernet cables. The PoE ports provide both power and data connection to compatible cameras.

Abbildung 3: Camera Wiring Compatibility. This image illustrates that a standard network cable (Ethernet/PoE) is compatible for connecting cameras to this NVR, while traditional DC power and BNC video cables are not compatible.

4.3 Connecting to a Display and Network

• Schließen Sie einen Monitor an den HDMI- oder VGA-Ausgang des NVR an.
• Connect a USB mouse to one of the NVR's USB ports.
• Connect the NVR's LAN port to your network router or switch using an Ethernet cable for network access and remote viewing-Fähigkeiten.

4.4 Einschalten

Connect the provided power adapter to the NVR's 48V power input and then plug it into a power outlet. Flip the power switch on the rear panel to the ON position. The NVR will boot up, and you should see the boot screen on your connected monitor.

5. Bedienungsanleitung

5.1 Ersteinrichtungsassistent

Upon first boot, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up language, date/time, network settings, and hard drive initialization.

5.2 Live View

After initial setup, the NVR will display the live view von verbundenen Kameras. Sie können zwischen Einzelkamera- und Einzelkamera-Modus umschalten. view und Mehrkamera-Raster view using the on-screen controls or the remote control.

5.3 Aufnahme

The NVR supports continuous recording, scheduled recording, and motion-triggered recording. Configure recording schedules and settings via the main menu. Ensure your hard drive is initialized and healthy for recording.

5.4 Wiedergabe

Auf aufgezeichnetes Foo zugreifentage through the playback menu. You can search for recordings by date, time, and event type. Use the playback controls to fast forward, rewind, and pause.

5.5 Netzwerkzugriff und Fernzugriff Viewing

Once the NVR is connected to your network, you can access it remotely via a web browser or a dedicated mobile application. Refer to the NVR's network settings for IP address and port information. Ensure proper port forwarding is configured on your router for external access.

6. Wartung

6.1 Festplattenverwaltung

Regularly check the status of your hard drives through the NVR's menu. Format hard drives periodically if necessary, or configure them for overwrite mode to ensure continuous recording.

6.2 Firmware-Updates

Überprüfen Sie die Angaben des Herstellers website for available firmware updates. Keeping your NVR's firmware up-to-date ensures optimal performance and security. Follow the provided instructions carefully when performing updates.

6.3 Reinigung

Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust and obstructions.

7. Fehlerbehebung

• Kein Strom:

  Ensure the power adapter is securely connected to both the NVR and a working power outlet. Check the power switch on the rear panel.
• Keine Videoausgabe:

  Verify the HDMI/VGA cable is securely connected to both the NVR and the monitor. Ensure the monitor is powered on and set to the correct input source.

• Kameras werden nicht angezeigt:

  Check that cameras are properly connected to the PoE ports. Ensure cameras are powered on and compatible with the NVR. Verify network settings for IP cameras.

• Kein Aufnehmen:

  Confirm that a hard drive is installed and properly initialized. Check recording schedules and ensure there is sufficient disk space. Verify camera connections.
• Probleme mit dem Fernzugriff:

  Ensure the NVR is connected to the network and has a valid IP address. Check router settings for port forwarding and firewall rules. Verify mobile app or web Browsereinstellungen.

8. Spezifikationen

9. Garantie und Support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official TSL webBewahren Sie Ihren Kaufbeleg als Kaufnachweis für Garantieansprüche auf.

For further assistance, you may contact your local distributor or the manufacturer's customer service department.