Morphy Richards 500012

Morphy Richards Ultra Glide 1600W Steam Iron - Instruction Manual

Modell: 500012

Einführung

Vielen Dank für Ihren Einkauf.asing the Morphy Richards Ultra Glide 1600W Steam Iron. This manual provides important information for the safe and efficient use of your appliance. Please read it thoroughly before first use and keep it for future reference.

Wichtige Sicherheitshinweise

WARNUNG: Um das Risiko von Bränden, Stromschlägen oder Verletzungen zu verringern, befolgen Sie stets die grundlegenden Sicherheitsvorkehrungen.

  • Stellen Sie immer sicher, dass die LautstärketagDas „e“ auf dem Bewertungsetikett entspricht Ihrer Netzlautstärke.tage.
  • Das Bügeleisen, das Netzkabel und der Stecker dürfen nicht in Wasser oder andere Flüssigkeiten getaucht werden.
  • Unplug from the outlet when filling with water, emptying, or when not in use.
  • Betreiben Sie kein Gerät mit beschädigtem Kabel oder Stecker oder nachdem das Gerät nicht richtig funktioniert oder fallen gelassen oder in irgendeiner Weise beschädigt wurde.
  • Bewahren Sie das Bügeleisen und das Kabel außerhalb der Reichweite von Kindern auf.
  • Never leave the iron unattended while it is connected to the power supply or on an ironing board.
  • Verwenden Sie das Bügeleisen nur für den vorgesehenen Zweck.
  • Stellen Sie das Bügeleisen zum Abstellen immer auf eine stabile, hitzebeständige Unterlage.
  • Berühren Sie keine heißen Oberflächen. Benutzen Sie Griffe oder Knöpfe.

Produkt überview

Familiarize yourself with the components of your Morphy Richards Ultra Glide Steam Iron.

Diagram of Morphy Richards Ultra Glide Steam Iron components
Bild: Überview of the Morphy Richards Ultra Glide Steam Iron, highlighting key parts like the water tank, soleplate, and controls.
  • Wassertank: 350ml capacity for steam generation.
  • Temperaturregler: Passt die Wärme für verschiedene Stoffarten an.
  • Dampfregler: Regulates steam output or selects dry ironing.
  • Sprühdüse: For misting clothes.
  • Dampfstoß-Taste: Provides an extra shot of steam.
  • Selbstreinigungstaste: Aktiviert die Selbstreinigungsfunktion.
  • Teflon Coated Soleplate: Non-stick surface for smooth gliding.
  • Netzkabel: Connects to the electrical outlet.
  • Gummigriff: Für einen bequemen und sicheren Halt.

Einrichtung und erste Verwendung

  1. Auspacken: Nehmen Sie das Bügeleisen vorsichtig aus der Verpackung. Bewahren Sie die Verpackung für die spätere Lagerung oder den Transport auf.
  2. Erstreinigung: Wischen Sie die Bügelsohle mit ad . abamp Tuch, um eventuelle Herstellungsrückstände zu entfernen.
  3. First Use (Dry Ironing): Plug in the iron. Set the temperature dial to MAX. Allow the iron to heat up. Iron an old piece of fabric (e.g., a cotton rag) to burn off any remaining manufacturing residues. A slight odor or smoke may occur, which is normal and will dissipate.
  4. Befüllen des Wassertanks:
    Filling the water tank of the steam iron
    Image: Demonstrates how to fill the 350ml water tank using the provided water jug. Ensure the iron is unplugged before filling.
    • Stellen Sie sicher, dass das Bügeleisen vom Stromnetz getrennt ist.
    • Öffnen Sie die Abdeckung des Wassertanks.
    • Using the provided water jug, fill the water tank with clean tap water up to the 'MAX' mark. Do not overfill.
    • Schließen Sie den Wassertankdeckel sicher.

Bedienungsanleitung

Temperature and Fabric Selection

Always check the garment's care label for ironing instructions. If unsure, test on an inconspicuous area.

Temperature control dial with fabric types
Image: Close-up of the iron's temperature control dial, showing settings for various fabric types like Denim, Cotton, Wool, Silk, Linen, and Nylon.
  1. Plug the iron into a suitable power outlet (230V, 50Hz).
  2. Stellen Sie den Temperaturregler je nach Stoffart auf die gewünschte Einstellung ein. Die Kontrollleuchte leuchtet auf.
  3. Wait for the indicator light to turn off, indicating the iron has reached the set temperature. It will cycle on and off during ironing to maintain temperature.

Dampfbügeln

Steam ironing is effective for most fabrics, especially cotton and linen.

Woman using Morphy Richards Ultra Glide Steam Iron
Image: A person demonstrating horizontal steam ironing with the Morphy Richards Ultra Glide 1600W Steam Iron, showing steam emanating from the soleplate.
  1. Ensure the water tank is filled (see "Filling the Water Tank").
  2. Set the temperature dial to a steam-suitable setting (usually Cotton, Linen, or Max). Steam will only be produced at higher temperatures.
  3. Sobald die Kontrollleuchte erlischt, schieben Sie den Dampfregler auf die gewünschte Dampfstufe.
  4. Beginnen Sie mit dem Bügeln.

Trockenbügeln

For delicate fabrics or when steam is not required.

  • Ensure the water tank is empty or the steam control is set to the 'Dry' position.
  • Stellen Sie den Temperaturregler entsprechend der Stoffart ein.
  • Warten Sie mit dem Bügeln, bis die Kontrollleuchte erlischt.

Dampfstoßfunktion

Provides an extra powerful shot of steam to remove stubborn creases.

  • Ensure the iron is at a high temperature setting and the water tank is filled.
  • Press the Steam Burst button. Wait a few seconds between bursts to allow the steam to regenerate.

Nebelsprühfunktion

Dampens fabric for easier ironing, especially for dry creases.

  • Stellen Sie sicher, dass der Wassertank gefüllt ist.
  • Point the spray nozzle towards the garment and press the Mist Spray button.

Vertikales Bügeln

Ideal for removing creases from hanging garments, curtains, or drapes.

Man performing vertical ironing with the steam iron
Image: A person demonstrating vertical ironing on a hanging suit jacket using the Morphy Richards Ultra Glide Steam Iron.
  • Hängen Sie das Kleidungsstück auf einen Kleiderbügel.
  • Halten Sie das Bügeleisen senkrecht, einige Zentimeter vom Stoff entfernt.
  • Press the Steam Burst button to release steam. Do not let the soleplate touch the fabric directly.

Pflege und Wartung

Nach jedem Gebrauch

  • Ziehen Sie den Stecker des Bügeleisens und lassen Sie es vollständig abkühlen.
  • Leeren Sie das restliche Wasser aus dem Tank.
  • Wischen Sie die Bügelsohle mit ad . abamp cloth to remove any starch or residue.
  • Lagern Sie das Bügeleisen aufrecht auf seiner Fersenstütze.

Self-Cleaning Function (Anti-Calc)

Use this function regularly (e.g., once a month) to remove mineral deposits and maintain steam performance.

  1. Füllen Sie den Wassertank bis zur MAX-Markierung.
  2. Schließen Sie das Bügeleisen an und stellen Sie den Temperaturregler auf MAX.
  3. Sobald die Kontrollleuchte erlischt, ziehen Sie den Stecker des Bügeleisens.
  4. Halten Sie das Bügeleisen waagerecht über ein Waschbecken.
  5. Press and hold the Self-Clean button. Hot water and steam will be expelled from the soleplate, carrying away impurities.
  6. Schütteln Sie das Bügeleisen vorsichtig hin und her, bis der Wassertank leer ist.
  7. Release the Self-Clean button.
  8. Plug the iron back in, let it heat up to dry the soleplate, then unplug and store.

Fehlerbehebung

ProblemMögliche UrsacheLösung
Das Eisen erhitzt sich nicht.Nicht eingesteckt; Steckdose defekt; Temperaturregler auf MIN eingestellt.Prüfen Sie Stecker und Steckdose; stellen Sie den Temperaturregler auf die gewünschte Einstellung.
Kein oder zu wenig Dampf.Wassertank leer; Temperatur zu niedrig; Dampfregler auf Trockenbetrieb eingestellt.Wassertank füllen; Temperatur auf dampfgeeignetes Niveau einstellen; Dampfregulierung anpassen.
Wasser tritt von der Sohle aus.Temperature too low for steam; water tank overfilled; anti-drip system activated (normal at low temps).Increase temperature; do not overfill water tank; ensure iron is hot enough for steam.
Weiße Flocken, die von der Sohle abfallen.Mineralablagerungen (Kalkablagerungen).Perform the self-cleaning function.

Technische Daten

BesonderheitDetail
Modellnummer500012
Leistung1600 Watt
Bandtage230 Volt
Frequenz50 Hz
Fassungsvermögen des Wassertanks350 ml
SohlenplattentypTeflon Coated (PTFE)
Abmessungen (L x B)32L x 13W Millimeters
Gewicht500 Gramm
Im Lieferumfang enthaltene KomponentenSteam Iron, Water Jug, Instruction Manual, Warranty Card
UrsprungslandIndien

Garantieinformationen

The Morphy Richards Ultra Glide 1600W Steam Iron comes with a 2 Jahr Garantie on the product from the date of purchase. Please retain your purchase receipt and warranty card for any warranty claims.

For detailed terms and conditions, refer to the warranty card included with your product.

Kundenservice

For any queries, service requests, or technical assistance, please contact Morphy Richards customer support.

  • Hersteller: ABC Manufacturer, Industrial Estate, Mumbai, India
  • Importer & Marketer: Bajaj Electricals Ltd, 45/47, Veer Nariman Road, Mumbai, 400001
  • Refer to your warranty card or the official Morphy Richards webDie aktuellsten Kontaktinformationen finden Sie auf dieser Webseite.

© 2026 Morphy Richards. Alle Rechte vorbehalten.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.