Wasp 633809003226 Barcode Printer User Manual

1. Einleitung

This manual provides comprehensive instructions for the setup, operation, and maintenance of the Wasp 633809003226 Barcode Printer. The WPL308 desktop barcode printer is a versatile medium-duty barcode printer designed to support a wide range of printing applications. It features a durable double-wall clamshell design, a 3.5-inch color TFT display with real-time clock, and supports both thermal transfer and direct thermal printing. With a printing speed of up to 8 inches per second at 203 dpi resolution and ample memory (128 MB Flash and 128 MB SDRAM), it is suitable for printing high-volume 4x6 shipping labels, high-resolution product markings, graphic solutions, and labels for electronics marking applications.

2. Produktüberschreitungview

The Wasp 633809003226 Barcode Printer is engineered for efficiency and reliability. Key features include:

• Up to 203 mm (8 in) per second print speed, ensuring fast label production.
• Equipped with 128 MB Flash memory and 128 MB SDRAM memory for robust performance.
• MicroSD flash memory expansion slot, supporting up to 32 GB for extensive storage needs.
• Standard interfaces include Serial, internal Ethernet, USB 2.0, and USB Host for versatile connectivity.
• Features a 3.5-inch TFT display for easy navigation and status monitoring.

Abbildung 2.1: Vorderseite view of the Wasp 633809003226 Barcode Printer. The printer is shown actively printing labels, with its 3.5-inch color TFT display visible, showing interface and sensor settings. The Wasp logo is prominently displayed on the front panel.

3. Einrichtungsanweisungen

Follow these steps to set up your Wasp Barcode Printer:

1. Auspacken: Carefully remove the printer and all accessories from the packaging. Verify that all components listed in the packing list are present.
2. Platzierung: Place the printer on a stable, flat surface with adequate ventilation. Ensure there is enough space around the printer for proper operation and maintenance.
3. Stromanschluss: Connect the power adapter to the printer's power port and then plug the power cord into a grounded electrical outlet. Do not power on the printer yet.
4. Medien laden:
   • Öffnen Sie die obere Abdeckung des Druckers.
   • Insert the label roll onto the media supply spindle, ensuring the labels feed from the bottom of the roll.
   • Thread the labels through the media guides and under the print head assembly. Adjust the media guides to fit the width of your labels.
   • Schließen Sie die obere Abdeckung sicher.
5. Anschließen an den Computer:
   • For USB connection: Connect one end of the USB cable to the printer's USB port and the other end to your computer's USB port.
   • For Ethernet connection: Connect an Ethernet cable from the printer's Ethernet port to your network router or switch.
6. Treiberinstallation:
   • Schalten Sie den Drucker mit dem Netzschalter ein.
   • Insert the driver CD (if provided) into your computer's CD-ROM drive, or download the latest drivers from the official Wasp support webWebsite.
   • Befolgen Sie die Anweisungen auf dem Bildschirm, um die Treiberinstallation abzuschließen.
7. Kalibrierung: After installing drivers and loading media, perform a media calibration through the printer's utility software or directly from the printer's display menu (refer to the display options like "Sensor" and "Interface" as seen in Figure 2.1). This ensures accurate label detection and printing.

4. Bedienungsanleitung

Once the printer is set up and drivers are installed, you can begin printing labels:

1. Softwarevorbereitung: Open your label design software (e.g., WaspLabeler, Bartender, or other compatible software).
2. Gestalten Sie Ihr Etikett: Create or open your label design. Ensure the label dimensions in the software match the physical labels loaded in the printer.
3. Drucker auswählen: In your software's print settings, select the "Wasp 633809003226 Barcode Printer" as your output device.
4. Configure Print Settings: Adjust print settings such as darkness, speed, and number of copies as needed. Ensure the correct print language (TSPL or ZPL2, as indicated on the printer's display in Figure 2.1) is selected if applicable.
5. Drucken: Click the "Print" button in your software. The printer will begin printing your labels.
6. Überwachung: Monitor the printer's display for status messages or errors during the printing process.

5. Wartung

Regelmäßige Wartung gewährleistet optimale Leistung und verlängert die Lebensdauer Ihres Druckers:

• Reinigen des Druckkopfes:
  • Schalten Sie den Drucker aus und trennen Sie das Netzkabel.
  • Öffnen Sie die Druckkopfeinheit.
  • Using a lint-free cloth or cotton swab lightly dampened with isopropyl alcohol, gently wipe the print head surface. Allow it to dry completely before closing the printer.
• Reinigung der Walzenplatte:
  • With the printer off, gently rotate the platen roller and wipe its surface with an isopropyl alcohol-dampened cloth to remove adhesive residue or dust.
• Allgemeine Reinigung: Verwenden Sie ein weiches, trockenes Tuch, um die Außenseite des Druckers abzuwischen. Vermeiden Sie die Verwendung von Scheuermitteln oder Lösungsmitteln.
• Medienersatz: Replace label rolls and thermal transfer ribbons (if using thermal transfer mode) as they run out to prevent printing interruptions.

6. Fehlerbehebung

In der folgenden Tabelle finden Sie häufig auftretende Probleme und deren Lösungen:

7. Spezifikationen

Detailed technical specifications for the Wasp 633809003226 Barcode Printer:

8. Garantie und Support

For detailed warranty information, please refer to the documentation included with your product or visit the official Wasp website. For technical support, driver downloads, and additional resources, please visit the manufacturer's support page or contact their customer service.

You may also find general information about thermal printers and related technologies at www.tscprinters.com, a common resource in the industry.